Hooks

Kamatsu Cheburashka Offset Light are very strong and extremely sharp offset hooks designed specifically for soft lures. Manufactured from carbon steel, they combine reliable strength with a fine, needle-sharp point that penetrates quickly and securely.

The elongated hook shape helps to reduce missed bites, while the raised step on the shank prevents the soft lure from sliding down towards the bend. This keeps the lure sitting correctly on the hook and maintains an effective presentation, even after repeated casts and retrieves.

Each hook features a barb and a large eye, making it easy to attach to a wide range of rigs and leaders. The offset design is well suited to weedless and Texas-style presentations, where the hook point can be tucked into the body of the soft lure to reduce snagging.

Supplied in packs of 7, Kamatsu Cheburashka Offset Light hooks are available in a choice of sizes to suit different soft lures and fishing situations. Whether you are targeting perch, pike, zander or other predatory species, these hooks offer a dependable combination of sharpness, strength and secure lure retention.

Technical Specifications:

Brand – Kamatsu
Model – Cheburashka Offset Light
Product Type – Offset Hooks
Material – Carbon Steel
Hook Shape – Offset
Features – Barb, Large Eye, Raised Step to Prevent Lure Slippage
Pack Quantity – 7 Pieces
Available Sizes – 1, 2, 4, 6, 8
Suitable For – Soft Lures

GURU QM1 Speed Stop Bayonet Hair Rigs are ready-tied hooklengths designed specifically for method feeder fishing. Each rig is constructed to present a bait effectively on a wide range of commercial fisheries, making them a practical choice for anglers who want reliable, tangle-free presentations straight from the packet.

The rigs are built around the proven QM1 hook pattern and a bayonet hair arrangement. This allows pellets, wafters or other suitable baits to be mounted quickly and securely, so you can spend less time tying rigs and more time fishing. The Speed Stop system helps hold the bait in place during the cast and on impact with the water.

Each hooklength is tied using GURU N-Gauge monofilament, a line known for its strength and reliability. The 0.19 mm diameter offers a good balance between a low-visual profile and dependable performance when targeting carp, F1s and other commercial species.

These rigs are ideally suited to use with GURU Hybrid, Pellet and other method feeders. The short, neat hooklengths are designed to sit correctly on a method feeder, helping to produce positive bite indications and efficient hook holds.

Supplied in a pack of 8 ready-tied rigs, this size 12 version is a versatile choice for a variety of baits and conditions. Whether you are pleasure fishing or competing, having a supply of pre-tied bayonet hair rigs can save valuable time on the bank.

Technical Specifications:

Brand – GURU
Model – QM1 Speed Stop Bayonet Hair Rigs
Product Type – Ready-Tied Method Feeder Hooklengths
Hook Size – 12
Line Diameter – 0.19 mm
Line Material – GURU N-Gauge Monofilament
Rig Type – Bayonet Hair Rig
Quantity – 8 Rigs Per Pack
Compatible Feeders – GURU Hybrid, GURU Pellet and Other Method Feeders
Fishing Technique – Method Feeder Fishing
Suitable For – Commercial Fisheries, Carp, F1s and Other Coarse Fish

Azura Kenshin Offset Hook is a specialist offset hook range developed for rigging soft lures, designed to present worms, shads, creature baits and other soft plastics effectively in a wide range of predator fishing situations.

The hooks are manufactured from high-quality carbon steel, a material chosen for its combination of strength and durability. This construction helps the hook resist deformation even under heavy pressure, so it maintains its shape during powerful takes, prolonged fights and repeated use.

Each hook features an extremely sharp point, engineered to deliver easy and rapid penetration into a fish's lip. Reliable hook point sharpness is a key factor when fishing soft lures, as it directly influences hook-up ratios, particularly when fish strike short or when the lure is worked at distance.

The enlarged step on the hook shank is a practical detail for soft lure anglers. It helps prevent the lure from sliding down the shank, keeping the soft plastic correctly positioned and improving the overall presentation of the rig.

The offset shape allows soft lures to be rigged in a natural, weedless or semi-weedless style, which is useful when fishing around cover, structure and vegetation. This makes the Azura Kenshin Offset Hook suitable for a variety of soft lure presentations where a clean, snag-resistant profile is beneficial.

The range is available in several sizes to suit different lure types and target species:

• Size 1 – 5 pcs – 3.7 cm
• Size 2 – 5 pcs – 3.2 cm
• Size 4 – 5 pcs – 3.0 cm
• Size 6 – 5 pcs – 2.6 cm

With their carbon steel construction, sharp points and anti-slip step, Azura Kenshin Offset Hooks are a dependable choice for anglers who fish soft lures for perch, pike, zander and other predatory species.

Technical Specifications:

Brand – Azura
Model – Kenshin Offset Hook
Product Type – Offset Hooks for Soft Lures
Material – High-Quality Carbon Steel
Hook Point – Extremely Sharp
Shank Feature – Enlarged Step to Prevent Lure Slippage
Available Sizes – 1, 2, 4, 6
Pack Quantity – 5 pcs per pack
Size 1 – 5 pcs, 3.7 cm
Size 2 – 5 pcs, 3.2 cm
Size 4 – 5 pcs, 3.0 cm
Size 6 – 5 pcs, 2.6 cm
Fishing Technique – Soft Lure Fishing
Suitable For – Perch, Pike, Zander and Other Predators

Pro FL Pro Feeder Rigs are ready-tied hooklengths developed specifically for Method Feeder fishing. Each rig combines a strong wire hook with a 10 cm braided hooklink and a coiled wire hair needle, giving you a tangle-free, presentation-ready setup that is ideal for carp, F1s and other coarse fish taken on bottom and Method tactics.

The hook is tied to a 10 cm braided hooklink with a diameter of 0.16 mm. Braid offers very low stretch and excellent suppleness, so the hooklink behaves naturally on the lakebed and transmits every indication clearly. The short 10 cm length is well suited to Method Feeder and inline feeder setups where a compact, efficient rig is preferred.

Attached to the hook on a hair is a coiled wire needle measuring 7 mm. This needle holds boilies, wafters, pellets and other baits securely in place, even during a powerful cast, and makes bait changes quick and simple on the bank. The hair presentation keeps the bait separate from the hook point, which supports confident, positive takes.

The hook features a special bend designed to promote fast and effective penetration into the fish's lip. Combined with the sharp point and strong wire construction, this geometry helps the hook find a secure hold as soon as the fish turns or moves off with the bait.

These rigs are a practical choice for bottom fishing with a feeder rod, whether you are fishing boilies, wafters, pellets or other baits. They are supplied in a pack of 8 pieces and are available in a range of hook sizes, so you can match the rig to your chosen bait and the size of fish you expect to encounter.

Available hook sizes: 6, 8, 10, 12 and 14.

Technical Specifications:

Brand – Pro FL
Model – Pro Feeder Rigs
Product Type – Ready-Tied Method Feeder Hooklengths
Hook Type – Wire Hook with Special Bend
Hooklink Length – 10 cm
Hooklink Diameter – 0.16 mm
Hooklink Material – Braided Line
Hair Needle – Coiled Wire, 7 mm
Bait Compatibility – Boilies, Wafters, Pellets and Other Baits
Available Hook Sizes – 6, 8, 10, 12, 14
Pack Quantity – 8 Pieces
Fishing Technique – Method Feeder, Bottom Fishing
Suitable For – Coarse Fishing, Carp and F1 Fishing

BKK IMP single replacement hooks are designed to convert treble-hook lures such as spoons and plugs into a single-hook setup. Whether you are chasing pike, perch or zander, swapping a treble for a single hook can reduce snagging, simplify unhooking and present a cleaner profile in the water.

The hook features a special profile that supports a fast, secure hookset and helps keep the fish firmly connected during the fight. This geometry is particularly useful when fishing with spoons and plugs where a reliable hook hold matters, especially around weed, snags or when fish are lightly hooked.

A large eye makes fitting the hook quick and easy. It slides readily onto lure rings, split rings and the attachment points found on spoons and plugs, so you can change hooks bankside without fuss. This is a practical advantage when you want to alter the action or balance of a lure, or replace a damaged hook during a session.

The needle-sharp point with a barb is engineered for optimum penetration. A sharp point and well-formed barb help the hook drive home on the strike and reduce the chance of the hook working loose. The barb also helps retain the hook once it has taken hold.

BKK IMP hooks are available in different sizes to suit a range of lure types and target species. Choose the size that matches the lure and the fish you expect to encounter. The table below shows the available sizes and pack quantities.

Available sizes:
Size 1 – 9 pcs
Size 2 – 10 pcs

Technical Specifications:

Brand – BKK
Model – IMP
Product Type – Single Replacement Hooks
Use – Replacement hook for spoons and plugs
Eye – Large eye for easy attachment
Point – Needle-sharp point with barb
Profile – Special profile for fast hookset and secure hold
Available Sizes – Size 1 (9 pcs), Size 2 (10 pcs)
Pack Quantities – Size 1: 9 pcs; Size 2: 10 pcs

Owner S-59 are jig-style hooks built around a large eye, a design that makes them a practical choice for a wide range of jig presentations. Whether you are rigging soft plastics, small spoons or ultralight lures, the oversized eye is the defining feature of this pattern and the reason many anglers keep a pack in their tackle box.

The large eye is what sets the S-59 apart from standard jig hooks. It allows the hook to be clipped quickly and securely to a snap link, so you can change lures or hook sizes on the bank without retying knots. This is particularly useful when you are fishing a snap swivel or a quick-change link and want to swap presentations as conditions change.

Because the eye is generous in size, the S-59 also works well with a Cheburashka-style weight or similar jig head system. The hook can be threaded or attached with minimal fuss, and just as importantly, it can be removed quickly when you want to change rigs or pack away. That ease of attachment and removal is a real advantage when you are fishing through a session and want to stay efficient.

The hooks are very sharp straight out of the pack, which helps with positive hook sets when fishing soft lures and small jig presentations. Sharpness is a key factor in jig fishing, where bites can be subtle and the window for a successful strike can be short. A hook that penetrates cleanly gives you a better chance of converting those bites into landed fish.

The S-59 is available in a range of sizes to suit different lure weights and target presentations. The pack contents vary by size: size 2 comes with 6 pieces, size 4 with 7 pieces, size 6 with 8 pieces and size 8 with 9 pieces. The standard pack is listed as 10 pieces, so please check the size-specific quantity when ordering.

These hooks are suited to jig fishing with soft plastics, small spoons and ultralight lures. They are a good match for anglers who fish light jig rigs, drop-shot-style presentations or any setup where a large-eye hook and quick attachment are useful. The size range covers a variety of small to medium lure profiles, making the S-59 a versatile option for freshwater and light saltwater applications where finesse and quick lure changes matter.

If you are looking for a jig hook that is easy to attach, easy to remove and sharp enough for confident hook sets, the Owner S-59 is a solid choice. Choose your size based on the lures you fish and the quantity you need, and keep a few packs on hand for your next session.

Technical Specifications:

Brand – Owner
Model – S-59
Product Type – Jig Hooks
Hook Style – Large Eye Jig Hook
Eye – Large Eye for Snap Links and Cheburashka Weights
Sharpness – Very Sharp
Pack Quantity – 10 pcs (standard pack)
Size 2 Pack Quantity – 6 pcs
Size 4 Pack Quantity – 7 pcs
Size 6 Pack Quantity – 8 pcs
Size 8 Pack Quantity – 9 pcs
Available Sizes – 2, 4, 6, 8
Variant References – 51580-2 (Size 2), 51580-4 (Size 4), 51580-6 (Size 6), 51580-8 (Size 8)
Primary Use – Jig Fishing with Soft Lures, Spoons and UL Lures
Suitable For – Soft Plastics, Small Spoons, Ultralight Lures
Attachment – Snap Link, Cheburashka Weight or Similar Jig Head System

BKK Titan Worm Hook is a specialist offset hook range built for large soft lures and serious predator fishing. These are exceptionally big, strong hooks designed to handle bulky worms, swimbaits and other substantial presentations where a standard hook would simply not cope. The offset profile and heavy-duty construction make them a dependable choice for anglers targeting big fish with big baits.

The defining feature of the Titan Worm Hook is the integrated spiral at the hook eye. This spiral is screwed directly into the nose of the soft lure, creating a very secure hold that keeps the hook firmly attached to the bait. Because the spiral grips the lure internally, the hook stays in position cast after cast, which helps maintain correct presentation and reduces the need to constantly re-rig. This is particularly valuable with large, heavy soft plastics that would otherwise slip down the hook shank.

A silicone stopper point on the hook shank provides an additional practical benefit. It prevents the line or leader from sliding along the hook, helping to keep the connection stable and the presentation consistent. This small but well-considered detail supports reliable rigging, especially when fishing with braid or fluorocarbon leaders.

The hooks are finished with BKK's Super Slide coating. This coating is designed to support smooth, efficient hook penetration, helping the point drive home cleanly when a fish takes the lure. Combined with the sharp, strong wire, the coating contributes to dependable hooksets in demanding situations.

The elongated hook shape is another important design element. This extended profile helps reduce missed hookups, as the hook point sits further back and is well positioned to connect with the fish's mouth when it engulfs the lure. The hooks also feature a barb to help hold the fish once hooked, and a large eye that makes tying and rigging easier, including with heavier lines and leaders.

These hooks are available in a range of sizes to suit different lure sizes and target species. The pack quantities vary by size: size 4/0 comes in packs of 4, while sizes 8/0, 10/0 and 12/0 come in packs of 3, and size 14/0 comes in packs of 2. This range allows anglers to match the hook to the lure and the fishing situation, from large soft plastics through to the biggest presentations.

In practice, the BKK Titan Worm Hook is suited to fishing large soft lures for big predatory fish. The offset design and spiral attachment make it a natural fit for weedless-style rigging of worms and similar soft baits, where the hook needs to stay securely in the lure while remaining ready to set when a fish bites. The strength and sharpness of the hook give anglers confidence when targeting powerful species in demanding conditions.

Technical Specifications:

Brand – BKK
Model – Titan Worm Hook
Product Type – Offset Worm Hook
Hook Type – Offset Hook
Coating – Super Slide Coating
Features – Integrated Spiral, Silicone Stopper Point, Barb, Large Eye
Hook Shape – Elongated
Available Sizes – 4/0, 8/0, 10/0, 12/0, 14/0
Pack Quantity – Size 4/0: 4 pcs; Sizes 8/0, 10/0, 12/0: 3 pcs; Size 14/0: 2 pcs
Suitable For – Large Soft Lures, Worm Fishing, Big Bait Presentations

BKK Spear-21 UVO Treble Hooks are exceptionally strong, durable and razor-sharp treble hooks designed for serious predator anglers. Manufactured from forged, very high-quality carbon steel, they deliver the reliability and penetration needed when targeting hard-fighting fish with both soft and hard lures.

The forged carbon steel construction gives these hooks impressive strength relative to their wire thickness, allowing them to withstand the powerful runs and head shakes of predatory species without bending or failing. This makes them a dependable choice for anglers who demand consistent hook performance across repeated casts and demanding sessions.

Each hook is finished with a UV coating that is highly visible in murky, dark or stained water. This UV finish helps ensure that predators can easily locate the lure, which can be a real advantage when fishing low-light conditions, coloured rivers or deep, dimly lit venues where visual detection is reduced.

The Spear-21 UVO treble hooks are suitable for use with both soft and hard lures, giving anglers flexibility across a wide range of lure presentations. Whether you are fishing jerkbaits, crankbaits, spoons or soft plastics, these hooks are built to perform.

Available in a range of sizes to suit different lure types and target species:

• Size #1, #2, #1/0, #2/0 – 5 pieces per pack
• Size #6 – 6 pieces per pack
• Size #8, #10, #12 – 7 pieces per pack

With their forged carbon steel build, UV-enhanced visibility and sharp out-of-the-pack points, BKK Spear-21 UVO treble hooks are a strong choice for lure anglers chasing pike, perch, zander and other predatory fish.

Technical Specifications:

Brand – BKK
Model – Spear-21 UVO
Product Type – Treble Hooks
Material – Forged High-Quality Carbon Steel
Coating – UV Paint Finish
Hook Type – Treble
Available Sizes – #1, #2, #1/0, #2/0, #6, #8, #10, #12
Pack Quantity – 5 pcs (sizes #1, #2, #1/0, #2/0); 6 pcs (size #6); 7 pcs (sizes #8, #10, #12)
Suitable For – Soft and Hard Lures
Target Species – Predatory Fish
Fishing Technique – Lure Fishing

Korda Loop Rigs Klor B are ready-tied hooklinks designed for carp fishing, built around the proven hair rig principle and supplied on Klor B hooks. Each rig is pre-tied so you can tie on and cast out without spending time at the bank building hooklinks by hand.

The hair rig concept is one of the cornerstones of modern carp fishing. By presenting the bait on a short hair separate from the hook, the hook point stays exposed and free to turn and take hold once a carp picks up the bait. These ready-tied Loop Rigs take that principle and deliver it in a consistent, repeatable package, which is particularly useful when you want to change hooklinks quickly during a session.

Each rig is tied on a Klor B hook, a pattern well known among carp anglers for its reliable hooking characteristics. The hooklink material has a breaking strain of 30lb, giving you a strong, dependable connection between your main line and hook, suitable for targeting carp in a range of venues where a robust hooklink is required.

The rigs are supplied with a quick link already fitted, so swapping hooklinks is fast and straightforward. This is a real advantage when you are rotating baits, changing hook sizes or responding to what the fish are doing during a session. Instead of retying knots in poor light or bad weather, you simply unclip one rig and clip on another.

Each pack contains 3 ready-tied rigs, giving you spares for the session and beyond. The Loop Rigs are available in a choice of hook sizes, so you can match your hooklink to the bait you are using and the conditions you are fishing. Smaller sizes suit smaller baits and more cautious presentations, while larger sizes give you more hook hold when fishing bigger baits or targeting larger fish.

These hooklinks are aimed at carp anglers who value consistency and convenience. Whether you are fishing a short session on a local lake or a longer trip where preparation matters, having reliable ready-tied rigs in your tackle box means less time fiddling with knots and more time with a bait in the water.

Technical Specifications:

Brand – Korda
Model – Loop Rigs Klor B
Product Type – Ready-Tied Hair Rigs / Hooklinks
Hook Pattern – Klor B
Hooklink Breaking Strain – 30lb
Connection – Quick Link Fitted
Pack Quantity – 3 Rigs
Available Hook Sizes – 4B, 6B, 8B
Target Species – Carp
Fishing Technique – Carp Fishing / Hair Rig Presentation

Korda Loop Rigs Klor are ready-tied hair rigs designed for carp fishing, built around the proven Korda Klor hook pattern. Each rig is supplied pre-tied and ready to fish, allowing you to get straight to the water without spending time on the bank tying rigs by hand.

The hair rig system is one of the most effective presentations in modern carp fishing. By separating the bait from the hook point on a short hair, the rig allows the hook to turn and find a purchase point in the carp's mouth as the bait is taken. This makes hair rigs a reliable choice for a wide range of carp fishing situations, from pressured day-ticket waters to longer sessions on larger venues.

Each rig is tied on a Korda Klor hook, a pattern that has earned a strong reputation among carp anglers for its reliable hooking characteristics. The rigs are constructed from a 30lb hooklink material, giving a good balance between supple presentation and dependable strength when targeting carp of a decent size.

The rigs are supplied with a quick link connection, making it simple to swap rigs quickly when changing presentation, bait or hook size. This is particularly useful during a session when conditions change or when you want to experiment with different hookbait options without retying.

Each pack contains 3 ready-tied rigs, so you have spares on hand and can keep fishing without interruption. The rigs are available in hook sizes 4, 6 and 8, covering a range of bait sizes and presentation preferences.

These rigs are suitable for a variety of carp fishing applications, including bottom bait presentations, snowman rigs and other popular hookbait setups. Whether you are fishing a short day session or a longer campaign, having reliable ready-tied rigs in your tackle box is a practical advantage.

Technical Specifications:

Brand – Korda
Model – Loop Rigs Klor
Product Type – Ready-Tied Hair Rigs
Hook Pattern – Korda Klor
Hooklink Strength – 30lb
Connection – Quick Link
Pack Quantity – 3 Rigs
Available Hook Sizes – 4, 6, 8
Target Species – Carp
Fishing Technique – Hair Rig Presentation
Suitable For – Carp Fishing

Korda Long Shank X are premium carp hooks engineered for intensive carp fishing and built to perform in the most demanding conditions. Manufactured from strong, high-quality wire, these hooks are designed to withstand serious challenges while remaining reliable for a wide range of bottom bait presentations.

The Long Shank X pattern features an extended shank, a design that is widely appreciated by carp anglers for its secure hook holds and dependable performance with bottom baits. The long shank helps to create a stable platform for bait presentation, making it a practical choice for rigs where confidence in the hook's behaviour is essential.

Constructed from strong, high-quality wire, these hooks offer the durability needed for repeated use in tough fishing situations. The wire gauge and temper are selected to provide a balance between strength and the sharpness required for effective hook penetration, giving you the assurance that your hook will perform when it matters most.

These hooks are particularly suited to bottom bait fishing, where they can be used with a variety of presentations. Whether you are fishing over gravel, silt or clay, the Long Shank X is designed to cope with the challenges of the lakebed and maintain its performance cast after cast.

Available in a range of sizes, including size 6 and size 10, the Korda Long Shank X allows you to match your hook size to your chosen bait and target. This versatility makes them a valuable addition to any carp angler's tackle box, from short sessions to extended campaigns.

If you demand reliability and strength from your terminal tackle, the Korda Long Shank X hooks are a dependable choice. Their robust construction and proven pattern make them a serious option for anglers who refuse to compromise on quality.

Technical Specifications:

Brand – Korda
Model – Long Shank X
Product Type – Carp Hooks
Material – Strong, High-Quality Wire
Hook Pattern – Long Shank
Available Sizes – 6, 10
Fishing Technique – Bottom Bait Fishing
Target Species – Carp
Suitable For – Intensive Carp Fishing, Demanding Conditions

Korda Loop Rigs DF Wide Gape are ready-to-use carp rigs designed for anglers who want a reliable, tangle-free presentation straight out of the packet. Each rig is pre-tied and features the proven Korda Wide Gape hook, a pattern trusted by carp anglers for its secure hook holds and effective hooking potential.

The rigs are constructed from a supple, high-quality braided hooklink material with a breaking strain of 18lb. This gives a good balance between strength and finesse, making the rig suitable for a wide range of carp fishing situations, from pressured day-ticket waters to larger syndicate lakes.

The DF (Dumbell/Fluoro) presentation is designed to sit perfectly on the lakebed, with the hookbait balanced to react naturally to the carp's feeding behaviour. The Wide Gape hook pattern provides excellent hooking mechanics, with a wide gape and inturned point that helps the hook turn and take hold securely in the bottom lip.

These rigs are ideal for use with a variety of hookbaits, including bottom baits, pop-ups and wafters, depending on how you choose to balance them. The loop at the end of the rig allows for quick and easy attachment to your main line or leader via a quick link or loop-to-loop connection, so you can change rigs in seconds without having to tie a new one on the bank.

Available in hook sizes 6 and 8, the Korda Loop Rigs DF Wide Gape offer a convenient, consistent and effective ready-made rig option for carp anglers who value their time on the bank and want a presentation they can trust.

Technical Specifications:

Brand – Korda
Model – Loop Rigs DF Wide Gape
Product Type – Ready-Made Carp Rigs
Hook Pattern – Wide Gape
Hooklink Breaking Strain – 18lb
Presentation – DF (Dumbell/Fluoro)
Available Hook Sizes – 6, 8
Connection – Loop
Target Species – Carp
Fishing Technique – Carp Fishing, Hair Rigging
Suitable For – Bottom Baits, Pop-Ups, Wafters

Korda Loop Rigs DF Wide Gape X are ready-tied hooklinks designed for carp anglers who want a reliable, consistent rig straight out of the packet. Each rig is constructed with the proven Korda Wide Gape X hook, a pattern well regarded for its wide gape and secure hook holds, and is tied to a dependable 18lb hooklink material. This combination makes the Loop Rigs DF Wide Gape X a practical choice for a wide range of modern carp presentations.

The rigs are supplied pre-tied, which saves valuable time on the bank and removes the need to construct hooklinks from scratch. This is particularly useful during short sessions, when conditions change quickly, or when you simply want to maximise the time your bait is fishing effectively. Because each rig is produced to a consistent standard, you can rely on repeatable performance from one rig to the next.

The Wide Gape X hook is the central component of this rig. Its wide gape profile is intended to provide a good hooking potential, while the X designation refers to Korda's hook range. The hook is matched to an 18lb hooklink, giving a balanced setup that is suitable for a variety of carp waters where a moderately strong, low-visibility presentation is required.

The Loop Rig design is a popular style among carp anglers. It is typically used with a variety of bottom baits, pop-ups and wafters, depending on how the rig is balanced. The loop arrangement allows the hookbait to behave naturally and can be adapted to suit different lakebeds and feeding situations. Whether you are fishing over gravel, silt or mixed bottoms, a well-tied loop rig can present your bait effectively.

These rigs are available in hook sizes 4 and 6, covering the most commonly used sizes for carp fishing. Size 4 is often chosen when larger hooks and bigger baits are preferred, while size 6 offers a slightly smaller, more discreet option. Both sizes are tied to the same 18lb hooklink material, so you can select the hook size that best matches your bait and the carp you are targeting.

As part of Korda's tackle range, the Loop Rigs DF Wide Gape X are aimed at carp anglers who value dependable components and time-saving solutions. They are suitable for a range of carp fishing situations, from day sessions on commercial waters to longer sessions on larger venues. The ready-tied format also makes them a sensible choice as a backup rig in your tackle box.

If you are looking for a straightforward, ready-to-use hooklink that combines a recognised hook pattern with a practical 18lb breaking strain, the Korda Loop Rigs DF Wide Gape X are a sound option. Simply select your preferred hook size, attach the rig to your main line or leader, and you are ready to fish.

Technical Specifications:

Brand – Korda
Model – Loop Rigs DF Wide Gape X
Product Type – Ready-Tied Carp Hooklinks / Rigs
Hook Pattern – Korda Wide Gape X
Hooklink Breaking Strain – 18lb
Available Hook Sizes – 4, 6
Rig Style – Loop Rig
Presentation – Ready-Tied
Target Species – Carp
Fishing Technique – Carp Fishing / Bottom Fishing
Suitable For – Commercial Waters, Gravel Pits, Silt and Mixed Lakebeds

Korda Loop Rigs Krank are ready-tied hooklengths designed for carp anglers who want a reliable, consistent rig straight out of the packet. Each rig is built around the proven Korda Krank hook and is supplied pre-tied on 18lb hooklink material, so you can tie on and cast out without spending time at the bank building rigs from scratch.

The Korda Krank hook is a well-established pattern within the Korda range, favoured for its wide gape and aggressive curve, which helps the hook turn and take hold once a carp picks up the bait. Combined with the pre-tied loop arrangement, this creates a presentation that is quick to attach to your main line or leader via a loop-to-loop connection.

Because the rigs are supplied ready-tied, they are particularly useful for short sessions, overnighters and mobile carp fishing where time at the bank is limited. They also suit anglers who prefer the consistency of a factory-tied rig rather than relying on their own knot-tying on the bank, especially in cold or wet conditions.

The 18lb hooklink material offers a practical balance for carp fishing, being substantial enough for confident presentation while remaining suitable for a range of venues and situations. The loop at the end of each rig allows for straightforward attachment and quick changes of hooklength if you want to alter your presentation during a session.

These rigs are available in hook sizes 4, 6 and 8, giving you options to match different bait sizes and fishing situations. Size 4 suits larger baits and bigger carp, size 6 is a versatile middle option, and size 8 works well with smaller baits or more pressured fish.

Whether you are fishing a runs water, a syndicate lake or a day-ticket venue, Korda Loop Rigs Krank provide a convenient, ready-to-use hooklength solution that lets you focus on bait placement and bite indication rather than rig assembly.

Technical Specifications:

Brand – Korda
Model – Loop Rigs Krank
Product Type – Ready-Tied Carp Hooklengths / Rigs
Hook Pattern – Korda Krank
Hooklink Breaking Strain – 18lb
Rig Type – Pre-Tied Loop Rig
Available Hook Sizes – 4, 6, 8
Product Codes – KCR114 (Size 4), KCR115 (Size 6), KCR116 (Size 8)
Target Species – Carp
Fishing Technique – Carp Fishing / Bottom Fishing
Suitable For – Short Sessions, Overnighters, Mobile Carp Angling

Korda Chod Rig Long Barbed is a ready-tied carp rig built for anglers who want a dependable, tangle-resistant presentation straight out of the packet. Combining stiff Chod Mono with a strong Chod Hook, it is designed for use with throwing and casting systems where a shorter, rigid structure helps the rig settle cleanly and stay fishing effectively.

The rig is constructed from stiff Chod Mono, a material chosen for its ability to hold a rigid, pop-up style presentation. Because the material is stiff rather than supple, the rig resists tangling around itself and around the hook, which is particularly useful when fishing over debris, silt or uneven lake beds where a soft rig might fold back on itself.

At the business end sits a strong Chod Hook, a pattern suited to the demands of modern carp fishing. The hook is matched to the stiffness of the mono so that the whole rig behaves as a balanced unit, with the hook sitting in a fishing position rather than lying flat or curling over.

The rig features a D-ring with a mini swivel. This allows the rig to be attached quickly to a leader, main line or helicopter setup, and the swivel helps the rig rotate freely so that it can settle naturally on the lake bed. The D-ring also makes it easy to swap rigs without cutting and retying, which is a real advantage when you want to change presentation quickly during a session.

Because the rig is supplied ready tied, it removes the need to construct Chod rigs by hand at the bank. This is useful for anglers who want consistent presentation, for those who are new to Chod rigs, and for experienced carp anglers who prefer to carry pre-tied rigs so they can replace a damaged or blunt rig in seconds.

The Long Barbed version is supplied with a barbed hook point, which helps keep the hook in place once a carp is hooked. The rig is available in hook sizes 4, 6 and 8, giving anglers a choice to suit different bait sizes, hookbait presentations and the size of carp they expect to encounter.

This rig is aimed at carp fishing, particularly with throwing and casting systems where a stiff, short rig is preferred. It is a practical choice for stillwater carp angling, whether you are fishing close in or at range, and it suits anglers who value a neat, tangle-resistant presentation that is ready to fish immediately.

Technical Specifications:

Brand – Korda
Model – Chod Rig Long Barbed
Product Type – Ready-Tied Carp Rig
Rig Material – Stiff Chod Mono
Hook – Strong Chod Hook
Hook Point – Barbed
Connection – D-Ring with Mini Swivel
Available Hook Sizes – 4, 6, 8
Product Codes – KCR020 (Size 4), KCR021 (Size 6), KCR022 (Size 8)
Fishing Technique – Carp Fishing, Throwing and Casting Systems
Target Species – Carp
Key Features – Ready Tied, Tangle-Resistant, Stiff Rig Structure

Korda Chod Rig Short Barbed is a ready-tied carp rig designed for anglers who demand reliability and tangle-free performance. This rig combines a stiff Chod Mono material with a strong Chod Hook, creating a short, rigid structure that resists tangling even during aggressive casting with throwing systems.

The stiff, short construction is the key to its effectiveness. Unlike softer, longer rigs that can wrap around themselves or the lead, the Chod Rig Short maintains its shape in flight and on the lakebed. This makes it particularly suited to throwing systems where a clean, tangle-free presentation is essential for consistent results.

At the heart of the rig is the Chod Hook, a pattern known for its strong wire and reliable hooking potential. The hook is matched with Chod Mono, a stiff monofilament that provides the rigidity needed for the rig to sit correctly and present the bait effectively. The combination ensures the hook remains in an optimal position to take hold when a carp picks up the bait.

The rig features a D-ring with a mini swivel. This D-ring allows the hookbait to move freely and independently, which can improve hooking efficiency. The mini swivel connects the rig to the main line or leader, reducing the risk of line twist and allowing the rig to rotate naturally. This setup is a hallmark of modern Chod rig presentations.

This ready-tied rig saves valuable time on the bank. Instead of tying complex knots and assembling components, anglers can simply attach the rig and cast out. The short length and stiff material mean it is ready to perform straight out of the packet, making it an excellent choice for both experienced carp anglers and those new to Chod rig fishing.

The Korda Chod Rig Short Barbed is available in hook sizes 4, 6 and 8, covering a range of bait sizes and fishing situations. Size 4 is suited to larger baits and bigger carp, while sizes 6 and 8 offer a more subtle presentation for pressured fish or smaller hookbaits. All sizes share the same stiff, short design and D-ring swivel configuration.

Ideal for use with throwing systems and a variety of carp fishing setups, this rig is a practical addition to any carp angler's tackle box. Its tangle-resistant properties and reliable hooking mechanics make it a strong choice for waters where presentation and efficiency matter. Whether fishing short sessions or extended campaigns, the Korda Chod Rig Short Barbed delivers dependable performance.

Technical Specifications:

Brand – Korda
Model – Chod Rig Short Barbed
Product Type – Ready-Tied Carp Rig
Material – Chod Mono (stiff monofilament)
Hook – Chod Hook, barbed
Construction – Short, stiff rig
Special Features – D-ring with mini swivel
Available Hook Sizes – 4, 6, 8
Product References – KCR016 (size 4), KCR017 (size 6), KCR018 (size 8)
Fishing Technique – Carp fishing, throwing systems
Target Species – Carp
Suitable For – Tangle-free presentations, Chod rig fishing

Kamatsu Cheburashka Offset Forged are very strong and exceptionally sharp hooks designed specifically for soft lure fishing. Manufactured from carbon steel, they combine reliable strength with a fine, penetrating point that makes them a dependable choice for anglers targeting predatory fish with soft plastics.

The elongated hook shape helps to reduce missed bites, giving a more secure hook hold when fish attack the lure. This geometry is particularly useful when fishing soft baits that are worked slowly or allowed to sink, where a positive hook set can be difficult to achieve.

A raised step on the shank prevents the soft lure from sliding down towards the bend, keeping the presentation intact cast after cast. This is a practical detail that helps maintain the correct action of the lure and reduces the need for constant re-rigging.

Each hook features a barb to help keep hooked fish secure, and a large eye that makes tying knots and attaching split rings or leaders straightforward. The forged construction adds further strength without making the hook excessively heavy.

The Kamatsu Cheburashka Offset Forged hooks are supplied in packs of 7 and are available in a range of sizes to suit different soft lures and fishing situations. Whether you are fishing finesse presentations or larger soft baits, there is a suitable size to match your approach.

These hooks are well suited to a variety of soft lure techniques, including Texas rigs, Carolina rigs and other offset hook presentations. Their combination of sharpness, strength and anti-slip design makes them a reliable choice for anglers who demand consistent performance from their terminal tackle.

Technical Specifications:

Brand – Kamatsu
Model – Cheburashka Offset Forged
Product Type – Offset Hooks
Material – Carbon Steel
Construction – Forged
Hook Shape – Elongated Offset
Features – Barb, Large Eye, Raised Step to Prevent Lure Slippage
Pack Quantity – 7 Pieces
Available Sizes – 1, 2, 4, 6, 8, 1/0
Suitable For – Soft Lures
Fishing Techniques – Texas Rig, Carolina Rig, Offset Hook Presentations

VMC O'Shaughnessy Hooks are a specialist hook pattern designed for presenting large baits, whether you are fishing big deadbaits, large soft plastics or bulky natural offerings. The elongated O'Shaughnessy bend is a classic shape that helps to keep the hook point clear of the bait, which in turn supports more reliable hook sets and helps reduce missed or empty takes.

Manufactured from very strong steel, these hooks are built to cope with the demands of targeting larger, hard-fighting fish. The material choice gives the hook the resilience needed when you are applying pressure during a fight, while still allowing the fine wire to penetrate cleanly.

The Cut Point® needle point is exceptionally sharp and is engineered for rapid penetration. A sharp point is one of the most important factors in converting bites into landed fish, and the Cut Point® design helps the hook bite immediately on contact, even when fishing at distance or in deeper water.

The O'Shaughnessy pattern is a long-standing favourite among anglers who fish large baits because the extended shank and wide gape accommodate bulky presentations without crowding the hook point. This makes the pattern particularly useful for bait fishing where a big offering needs to sit naturally and still allow the hook to find purchase.

Each pack contains 25 hooks, giving you a generous supply for a full session or for building a number of rigs in advance. The hooks are available in a range of sizes, from size 1 through to 4/0, so you can match the hook to the size of bait and the species you are targeting.

Whether you are fishing for specimen fish with large baits or simply want a strong, sharp hook that will not let you down, the VMC O'Shaughnessy is a dependable choice for demanding angling situations.

Technical Specifications:

Brand – VMC
Model – O'Shaughnessy
Product Type – Fishing Hooks
Material – Very Strong Steel
Hook Point – Cut Point®
Hook Shape – Elongated O'Shaughnessy Bend
Pack Quantity – 25 Hooks
Available Sizes – 1, 2, 4, 6, 1/0, 2/0, 3/0, 4/0
Primary Use – Large Baits
Suitable For – Big Bait Presentations, Specimen Fishing

VMC Texan Super Light are specialist hooks designed for soft lure fishing, combining a lightweight wire construction with a shape that helps improve hook-up rates when fishing with soft plastics. The elongated hook bend and wide gape are intended to give the hook point better access to the fish's mouth, while the raised step on the shank helps keep the soft lure securely in position and reduces the risk of it sliding down during casting or retrieve.

Manufactured from very strong Vanadium® steel, these hooks are built to withstand the demands of repeated use with soft lures. The material provides a good balance between strength and weight, which is particularly useful when fishing with lighter presentations where a heavy hook can affect the natural movement of the lure.

The Spark Point® hook point is extremely sharp and designed for reliable penetration. This is especially important when fishing with soft plastics, where the hook needs to pass through the lure body and still achieve a solid hold in the fish's mouth. The sharp point helps reduce the force needed for a successful hook set, which can be an advantage when using lighter rods and lines.

The Texan Super Light hook is available in a range of sizes to suit different soft lure types and target species. The pack contains 5 hooks. The available sizes are 1, 4, 6, 1/0, 2/0 and 3/0, allowing anglers to match the hook size to the size of the lure and the fishing situation.

These hooks are suitable for a variety of soft lure presentations, including Texas rigs, Carolina rigs and other methods where a wide-gape hook with a step on the shank is beneficial. The design helps keep the lure in place while still allowing the hook to be exposed for a good hook set.

Technical Specifications:

Brand – VMC
Model – Texan Super Light
Product Type – Soft Lure Hooks
Material – Vanadium® Steel
Hook Point – Spark Point®
Hook Shape – Elongated Bend with Raised Step
Pack Quantity – 5 Pieces
Available Sizes – 1, 4, 6, 1/0, 2/0, 3/0
Fishing Techniques – Soft Lure Fishing, Texas Rig, Carolina Rig
Suitable For – Freshwater and Saltwater Soft Lure Presentations

Atora Method Rig is a ready-tied hooklength system designed for method feeder and specialist angling where a bait needs to be presented securely and precisely. Each rig combines a tied hook with a metal spike featuring a small barb, allowing boilies and similar baits to be mounted quickly and held firmly in place.

The metal spike is attached directly to the hook, so the bait sits tight against the hook rather than sliding along the hooklength. This is particularly useful when fishing with pop-up baits, where the buoyant bait must remain in the correct position at the hook point throughout the cast and during the retrieve.

Because the bait is pinned on the spike, it stays put during the cast and while the rig is being retrieved. This helps maintain a neat, tangle-resistant presentation and reduces the risk of the bait being lost or displaced before a fish picks it up.

The rig is supplied ready tied with a 0.20 mm hooklength, so it can be attached to a method feeder, inline lead or similar setup without the need to tie hooks on the bank. This makes it a practical choice for anglers who want a reliable, repeatable presentation with minimal preparation.

The Atora Method Rig is available in hook sizes 8, 10 and 12, all supplied with a 0.20 mm hooklength. Each pack contains 2 rigs.

Available variants:

• Hook size 8 – 0.20 mm hooklength
• Hook size 10 – 0.20 mm hooklength
• Hook size 12 – 0.20 mm hooklength

Technical Specifications:

Brand – Atora Fishing
Model – Method Rig
Product Type – Ready-Tied Hooklength / Method Feeder Rig
Hook Type – Barbed Hook with Metal Spike
Hook Sizes – 8, 10, 12
Hooklength Diameter – 0.20 mm
Bait Compatibility – Boilies and Pop-Up Baits
Pack Quantity – 2 Rigs
Fishing Technique – Method Feeder Fishing
Suitable For – Pop-Up Bait Presentation

VMC 2X Strong Inline Treble Hooks are premium replacement treble hooks engineered for anglers who demand maximum strength, durability and razor-sharp performance from their terminal tackle. Whether you are upgrading the hooks on a hard-bodied lure or rigging soft plastics, these inline trebles deliver the reliability that VMC is renowned for.

The hooks are forged from very high-quality carbon steel, a manufacturing process that aligns the steel's grain structure and produces a hook that is significantly stronger and more resistant to bending than standard wire hooks. The 2X Strong designation means the wire gauge has been increased to handle the extra pressure of powerful fish and heavy-duty applications, giving you confidence when a big fish makes a determined run.

Each hook is finished with a PTFE coating. This low-friction polymer coating serves multiple purposes: it helps the hook penetrate cleanly and quickly on the strike, it provides a barrier against water, corrosion and other environmental factors, and it maintains a smooth, slick surface that aids hooksets. The result is a hook that stays sharp and performs consistently, even after repeated exposure to water.

The inline treble design means the three hook points are arranged symmetrically around the shank, which promotes balanced presentation and reduces the chance of the hook rolling or twisting during the retrieve. This makes them equally effective on soft lures and hard lures, from crankbaits and jerkbaits to spoons, spinners and soft plastic swimbaits.

These hooks are available in a range of sizes to suit different lure types and target species. The listing covers multiple size options, allowing you to select the correct hook for your specific presentation. Each pack contains 5 hooks.

Technical Specifications:

Brand – VMC
Model – 2X Strong Inline Treble
Product Type – Treble Hooks
Material – Forged High-Quality Carbon Steel
Construction – Forged, 2X Strong Wire
Coating – PTFE
Hook Type – Inline Treble
Quantity per Pack – 5
Available Sizes – 1, 2, 4, 8
Suitable For – Soft Lures, Hard Lures
Key Features – Very Strong, Durable, Extremely Sharp, Corrosion Resistant

VMC Kaptain Treble Hooks are exceptionally strong, durable and razor-sharp treble hooks built from heavy-gauge wire for anglers who demand reliable hooking performance. Manufactured from forged, very high-quality carbon steel, they are designed to withstand the pressure of hard-fighting fish and the demands of repeated use in fresh and saltwater environments.

The heavy wire construction gives these hooks impressive strength and rigidity, making them a dependable choice when targeting powerful species or when fishing around structure where extra resilience is required. The forged carbon steel further enhances overall durability, helping the hook maintain its shape and performance over time.

Each hook is finished with a PTFE coating, which provides resistance to water, corrosion and other environmental influences. This coating also contributes to a smooth surface that supports reliable penetration, while helping to protect the hook during regular exposure to moisture and abrasive conditions.

Thanks to their versatile design, VMC Kaptain Treble Hooks are suitable for use with both soft and hard lures. Whether you are rigging soft plastics, replacing the standard hooks on a hard bait, or building custom lure setups, these trebles offer a dependable balance of strength, sharpness and durability.

The hooks are available in a range of sizes to suit different lure types and target species. Sizes available include 1, 2, 4, 6, 8, 1/0 and 2/0, allowing you to select the most appropriate option for your presentation and fishing situation.

Supplied in a pack of 5, VMC Kaptain Treble Hooks are a practical choice for lure anglers who want strong, sharp and corrosion-resistant treble hooks in their tackle box.

Technical Specifications:

Brand – VMC
Model – Kaptain Treble
Product Type – Treble Hooks
Material – Forged High-Quality Carbon Steel
Wire – Heavy Gauge
Coating – PTFE
Coating Properties – Water and Corrosion Resistant
Hook Type – Treble
Available Sizes – 1, 2, 4, 6, 8, 1/0, 2/0
Suitable For – Soft Lures and Hard Lures
Pack Quantity – 5 Pieces

VMC Cheb Lok are exceptionally strong and highly durable hooks designed specifically for soft lure fishing. Built to withstand the demands of modern predator angling, these hooks combine robust wire construction with a sharp, reliable point that performs consistently session after session.

The epoxy dot on the shank is a practical detail that keeps soft lures securely in place. It prevents the lure from sliding down the hook during casting or when working the lure through the water, so your presentation stays exactly as intended. This is particularly useful when fishing with soft plastics that need to sit correctly on the hook to swim properly.

Each hook is finished with a PTFE coating, which provides resistance to water, corrosion and other environmental factors. This coating also contributes to smooth hook penetration and helps maintain the hook's sharpness over time. The result is a hook that stays effective in both freshwater and saltwater environments.

The hooks are very sharp straight out of the packet and feature a barb to keep hooked fish secure. A large eye makes them easy to attach to a wide range of leaders, snaps and rigs, and simplifies tying when using thicker lines or when fishing in low light.

Available in a choice of sizes, these hooks suit a variety of soft lure presentations. Whether you are targeting perch, zander, pike or other predators, the VMC Cheb Lok offers the strength and reliability needed for confident hook holds.

Technical Specifications:

Brand – VMC
Model – Cheb Lok
Product Type – Hooks for Soft Lures
Coating – PTFE
Special Feature – Epoxy Dot to Prevent Lure Slippage
Hook Point – Very Sharp with Barb
Eye – Large
Available Sizes – 2, 4, 6, 8
Pack Quantity – 5 Pieces
Target Species – Perch, Zander, Pike and Other Predators
Fishing Techniques – Soft Lure Fishing
Suitable For – Freshwater and Saltwater

VMC Cheb Offset are large, very strong and exceptionally durable offset hooks designed for big soft lures. Their elongated hook shape helps to reduce missed bites, while the raised step and special epoxy point prevent the lure from sliding down the shank.

The hooks are finished with a PTFE coating that resists water, corrosion and other environmental influences, helping to maintain reliable performance over repeated sessions. Each hook is very sharp, features a barb and has a large eye, making it suitable for a range of rigging approaches with bulky soft plastics.

The offset design is particularly useful when fishing large, soft lures where the hook point needs to sit protected within the body of the lure. This helps to keep the presentation snag-resistant while still allowing a positive hook set when a fish takes. The elongated bend and wide gape provide plenty of room for the lure material, which can be an advantage when using thicker or heavily salted soft baits.

The raised step and epoxy point are practical details that help hold the lure securely in position. By reducing the chance of the soft plastic sliding down the hook shank, the lure stays correctly rigged for longer, so you can spend more time fishing and less time re-rigging. This is especially useful when casting repeatedly or working a lure through cover.

The PTFE coating not only contributes to corrosion resistance but also helps the hook move smoothly through the water and penetrate cleanly. The large eye accommodates a range of line types and leader materials, while the barb helps to keep hooked fish secure during the fight.

Available in a choice of sizes to suit different lure presentations:

• Size 2 – 6 pcs – 3.4 cm
• Size 4 – 6 pcs – 3.1 cm
• Size 1 – 5 pcs – 3.7 cm
• Size 1/0 – 5 pcs – 4 cm

Technical Specifications:

Brand – VMC
Model – Cheb Offset
Product Type – Offset Hooks
Use – Big Soft Lures
Hook Shape – Elongated Offset
Coating – PTFE
Coating Properties – Water and Corrosion Resistant
Hook Point – Sharp with Barb
Eye – Large
Special Features – Raised Step, Epoxy Point to Prevent Lure Slippage
Available Sizes – 2 (6 pcs, 3.4 cm), 4 (6 pcs, 3.1 cm), 1 (5 pcs, 3.7 cm), 1/0 (5 pcs, 4 cm)