Spinning

Major Craft Ceana Spinning Rod is a high-quality spinning rod developed specifically for the European market, designed to excel when targeting perch and pike with a wide range of lure fishing methods. Whether you are working small soft plastics along the bottom, twitching jerkbaits or casting spinners and spoons, this rod is built to handle the demands of modern predator fishing.

The fast action and strong blank deliver long, accurate casts while retaining enough power to control hard-fighting fish. The fast taper means the rod loads quickly and recovers rapidly, helping you punch lures out to distance and set hooks decisively, even when fishing at range or in windy conditions.

The sensitive and lightweight blank transmits excellent feedback, allowing you to feel exactly what your lure is doing on the retrieve. You can detect subtle takes, follow the lure over structure and maintain full control throughout the fight. This sensitivity is particularly valuable when fishing finesse presentations for pressured perch or when you need to distinguish a bite from bottom contact.

Fitted with Fuji Fazrite guides, the rod benefits from smooth line flow and reduced friction during casting and retrieving. Fuji hardware is widely respected among anglers for its reliability and consistent performance, and the Fazrite guides complement the rod's fast, responsive character.

The Versatile reel seat provides a secure, comfortable mounting point for your reel, keeping everything firmly in place during aggressive casting and powerful fights. The reel seat is designed to suit a broad range of reel types, making the rod easy to pair with your preferred setup.

Available in two lengths, 2.28 m and 2.44 m, both rated 4-15 g, the Ceana covers a versatile range of lure weights. The shorter 2.28 m version is well suited to tighter swims, bank fishing and situations where manoeuvrability matters, while the 2.44 m model offers extra reach for covering more water and casting lighter lures further.

This rod is an excellent choice for both beginners looking for a dependable, easy-to-use spinning rod and experienced anglers who want a responsive, well-equipped tool for perch and pike fishing. Its combination of fast action, sensitivity and quality Fuji components makes it a practical all-round option for freshwater lure fishing.

Technical Specifications:

Brand – Major Craft
Model – Ceana
Product Type – Spinning Rod
Length – 2.28 m / 2.44 m
Casting Weight – 4-15 g
Action – Fast
Guides – Fuji Fazrite
Reel Seat – Versatile Reel Seat
Blank – Lightweight, Sensitive, Strong
Target Species – Perch, Pike
Fishing Techniques – Lure Fishing, Spinning
Available Variants – 2.28 m (CNS-762L), 2.44 m (CNS-802L)
Suitable For – Beginners and Experienced Anglers

Major Craft AJI-DO 5G AJING S682L/AJI is an incredibly light and highly sensitive spinning rod, purpose-built for UL and XUL (ultra-light and extra ultra-light) fishing. This rod represents the pinnacle of Major Craft's AJI-DO range, combining advanced Japanese materials with a refined manufacturing process to deliver a blank that excels in finesse applications where feel and response are paramount.

The blank is constructed using the innovative Kado 5G method, which integrates the R360 construction technique with the latest Toray Industries T1100G carbon fibre. Unlike conventional carbon blanks, the R360 construction uses multiple carbon sheets arranged to maximise the rod's power and responsiveness. This results in a rod that is not only exceptionally light but also remarkably strong and sensitive, allowing you to detect even the most tentative bites.

All blank materials are manufactured in Japan, ensuring the highest levels of quality control and consistency. The rod features a very fast action, which, combined with its solid tip, transmits even the slightest touch from fish directly to your hand. This makes it ideal for targeting wary species that demand a delicate presentation and immediate bite detection.

Fitted with top-quality Japanese Fuji SiC guides and a Fuji reel seat, the AJI-DO 5G AJING offers smooth line flow and secure reel attachment. The split EVA handle provides excellent grip, even with wet hands, ensuring comfort and control during long sessions.

Whether you are fishing micro jigs, soft plastics, or small spoons for species such as horse mackerel, mackerel, or other light-game targets, this rod delivers the precision and finesse required for successful ultra-light angling.

Technical Specifications:

Brand – Major Craft
Model – AJI-DO 5G AJING S682L/AJI
Product Type – Spinning Rod
Length – 2.03 m
Casting Weight – 0.2–3 g
Action – Very Fast
Tip – Solid
Blank Material – Toray T1100G Carbon Fibre with R360 Construction
Guides – Fuji SiC
Reel Seat – Fuji
Handle – Split EVA
Manufacturing – Made in Japan
Fishing Techniques – UL, XUL, Ajing, Light Game
Target Species – Horse Mackerel, Mackerel, Small Predators

SpinMad Pro Spinner 7g is a versatile tail spinner built for anglers who want one lure that performs across a wide range of conditions. Its unique shape and optimally distributed weight allow it to work reliably whether you are casting from the bank, fishing from a boat or working a deep river channel.

The construction of the lure lets you fish comfortably at depths from around 1 m to 10 m, making it a genuinely adaptable option for both shallow and deep water. With the Pro Spinner you can fish almost anywhere: lakes, rivers, mountain streams, reservoirs and dams.

The Pro Spinner produces dense, fine but expressive vibrations. These vibrations not only attract fish effectively but also increase the contact between the lure and the angler, so you can feel what the lure is doing and stay in touch with the presentation throughout the retrieve.

It is an excellent choice for jigging and works particularly well for pike, perch, brown trout, zander, chub and ide. The 8 cm body and 7 g weight give it a compact, fish-catching profile that suits a wide variety of predatory species.

The lure is available in ten colour options, allowing you to match the hatch, the water clarity and the light conditions on the day.

Technical Specifications:

Brand – SpinMad
Model – Pro Spinner
Product Type – Tail Spinner
Length – 8 cm
Weight – 7 g
Running Depth – 0.5–2 m
Fishing Depth Range – 1–10 m
Action – Dense, fine, expressive vibrations
Colours – 01, 02, 03, 04, 05, 06, 07, 08, 09, 10
Target Species – Pike, perch, brown trout, zander, chub, ide
Fishing Techniques – Spinning, jigging
Suitable Waters – Lakes, rivers, mountain streams, reservoirs, dams

SpinMad Jag - is a heavier bait with the aggressive action favoured by predators. Ideal for jigging. The clear body vibration and strong light reflections result in performance that is appreciated by anglers around the world. The JAG model produces the highest light reflections in the entire SpinMad spinner range. These features will come in handy when searching for predators in murky waters and at great depths. the 18g weight and size allows the lure to be widely used for a wide range of species such as perch, pike, sturgeon, salmon and bream. The JAG 18g model is best suited for fishing at depths of 1-5 m.

Length - 8cm
Weight- 18g
Type - Sinking

SpinMad Jigmaster - anglers choose this lure for its wide range of applications. the 12 gram Jigmaster is not only an effective pike lure, but also a proven choice for large bass and trout. The JIGMASTER 12 gram spinner tail copes well with grassy fishing areas and shows its effectiveness already with a slow, steady retrieve. These lures are also ideal for fishing in deep areas. The Jigmaster 12g spinning tail is a lure with all the characteristics that make it the ultimate pike bait. Its design allows for effective fishing in shallow waters as well as in various depths. It is very responsive to rod movements and can be used in many effective ways.

Length - 8cm
Weight- 12g

SpinMad Mag 6g is a compact tail spinner lure built for jigging and vertical presentations. Its spinning blade rotates continuously on the drop, creating flashes and vibrations that trigger aggressive reactions from predatory fish. These qualities are especially valuable when fishing in coloured water or at greater depths, where visual and pressure-based attraction helps fish locate the lure.

The MAG 6g model is best suited to fishing depths of roughly 1 to 3 metres. It can be worked in many effective ways, and the best retrieve depends on the angler's imagination and on how active the fish are at any given time. Whether you are hopping it along the bottom, lifting and dropping it through the water column, or using a steady retrieve, the tail spinner keeps producing flash and vibration.

The lure is fitted with a single size 8 VMC double hook, a configuration that supports secure hook-ups while keeping the presentation streamlined. The compact 5.5 cm body and 6 g weight make it easy to cast and control, and the sinking type allows it to reach the desired depth quickly.

Although the MAG is primarily designed for perch fishing, it is also effective for pike, trout and other predators. Its small profile and lively action make it a versatile choice for anglers who want a lure that can be fished slowly and precisely in a range of freshwater situations.

Available in a selection of colours, the SpinMad Mag 6g is a practical addition to any predator angler's tackle box, particularly for jigging and finesse presentations where a compact, vibrating tail spinner can make the difference.

Technical Specifications:

Brand – SpinMad
Model – Mag 6g
Product Type – Tail Spinner Lure
Length – 5.5 cm
Weight – 6 g
Buoyancy – Sinking
Hook – Single size 8 VMC double hook
Recommended Fishing Depth – 1 to 3 m
Target Species – Perch, pike, trout and other predators
Fishing Techniques – Jigging, vertical fishing, spinning
Available Colours – 01, 03, 04, 06, 08, 09, 10, 11, 14

Lucky Craft Pointer - high quality spinning lures from Japanese manufacturers. This model is designed with a very low centre of gravity, using special brass wheels. The low centre of balance makes the lure wobble, vibrate and recover sharply, which makes it very attractive to predatory fish. This lure emits an intriguing low-frequency vibration and will attract predators from afar.

Length - 78mm
Weight- 9.8g
Dep th of bite- 2.0-2.4m
Hook size - VMC #6
Type - suspending

Shimano Twin Power FE (2024) is the latest generation of a reel that has been synonymous with outstanding quality, reliability and undeniable power for more than 30 years. This 2024 update takes that heritage further, combining a lightweight yet extremely rigid aluminium body and rotor with Shimano's most advanced gearing technology.

The reel is built around the latest Hagane technologies, including Hagane Gear, X-Ship, Micro Module II and Silent Drive components. Together these systems produce an exceptionally smooth, precise feel in use, with the internal parts meshing cleanly and consistently under load.

Shimano's three exclusive Infinity technologies are also present: INFINITYLOOP, INFINITYXROSS and INFINITY DRIVE. These contribute to consistent line lay, efficient power transmission and reliable performance when the reel is worked hard.

The Duracross Drag system delivers dependable stopping power, giving you the control needed to subdue even very large fish. When fishing at long range, the advanced Long Stroke AR-C spool design helps to increase casting distance and accuracy, making the reel well suited to demanding distance work.

The Anti-Twist Fin helps to prevent line twist as line is wound onto the spool or retrieved, supporting smoother, more trouble-free fishing sessions.

Available variants: 4000XG, 4000PG and 4000M.

Technical Specifications:

Brand – Shimano
Model – Twin Power FE (2024)
Product Type – Spinning Reel
Body Material – Aluminium
Rotor Material – Aluminium
Gearing – Hagane Gear, Micro Module II
Technologies – X-Ship, Silent Drive, INFINITYLOOP, INFINITYXROSS, INFINITY DRIVE
Drag System – Duracross Drag
Spool – Long Stroke AR-C
Line Management – Anti-Twist Fin
Available Variants – 4000XG, 4000PG, 4000M
Country of Origin – Japan

VMC 2X Strong Inline Treble Hooks are premium replacement treble hooks engineered for anglers who demand maximum strength, durability and razor-sharp performance from their terminal tackle. Whether you are upgrading the hooks on a hard-bodied lure or rigging soft plastics, these inline trebles deliver the reliability that VMC is renowned for.

The hooks are forged from very high-quality carbon steel, a manufacturing process that aligns the steel's grain structure and produces a hook that is significantly stronger and more resistant to bending than standard wire hooks. The 2X Strong designation means the wire gauge has been increased to handle the extra pressure of powerful fish and heavy-duty applications, giving you confidence when a big fish makes a determined run.

Each hook is finished with a PTFE coating. This low-friction polymer coating serves multiple purposes: it helps the hook penetrate cleanly and quickly on the strike, it provides a barrier against water, corrosion and other environmental factors, and it maintains a smooth, slick surface that aids hooksets. The result is a hook that stays sharp and performs consistently, even after repeated exposure to water.

The inline treble design means the three hook points are arranged symmetrically around the shank, which promotes balanced presentation and reduces the chance of the hook rolling or twisting during the retrieve. This makes them equally effective on soft lures and hard lures, from crankbaits and jerkbaits to spoons, spinners and soft plastic swimbaits.

These hooks are available in a range of sizes to suit different lure types and target species. The listing covers multiple size options, allowing you to select the correct hook for your specific presentation. Each pack contains 5 hooks.

Technical Specifications:

Brand – VMC
Model – 2X Strong Inline Treble
Product Type – Treble Hooks
Material – Forged High-Quality Carbon Steel
Construction – Forged, 2X Strong Wire
Coating – PTFE
Hook Type – Inline Treble
Quantity per Pack – 5
Available Sizes – 1, 2, 4, 8
Suitable For – Soft Lures, Hard Lures
Key Features – Very Strong, Durable, Extremely Sharp, Corrosion Resistant

VMC Kaptain Treble Hooks are exceptionally strong, durable and razor-sharp treble hooks built from heavy-gauge wire for anglers who demand reliable hooking performance. Manufactured from forged, very high-quality carbon steel, they are designed to withstand the pressure of hard-fighting fish and the demands of repeated use in fresh and saltwater environments.

The heavy wire construction gives these hooks impressive strength and rigidity, making them a dependable choice when targeting powerful species or when fishing around structure where extra resilience is required. The forged carbon steel further enhances overall durability, helping the hook maintain its shape and performance over time.

Each hook is finished with a PTFE coating, which provides resistance to water, corrosion and other environmental influences. This coating also contributes to a smooth surface that supports reliable penetration, while helping to protect the hook during regular exposure to moisture and abrasive conditions.

Thanks to their versatile design, VMC Kaptain Treble Hooks are suitable for use with both soft and hard lures. Whether you are rigging soft plastics, replacing the standard hooks on a hard bait, or building custom lure setups, these trebles offer a dependable balance of strength, sharpness and durability.

The hooks are available in a range of sizes to suit different lure types and target species. Sizes available include 1, 2, 4, 6, 8, 1/0 and 2/0, allowing you to select the most appropriate option for your presentation and fishing situation.

Supplied in a pack of 5, VMC Kaptain Treble Hooks are a practical choice for lure anglers who want strong, sharp and corrosion-resistant treble hooks in their tackle box.

Technical Specifications:

Brand – VMC
Model – Kaptain Treble
Product Type – Treble Hooks
Material – Forged High-Quality Carbon Steel
Wire – Heavy Gauge
Coating – PTFE
Coating Properties – Water and Corrosion Resistant
Hook Type – Treble
Available Sizes – 1, 2, 4, 6, 8, 1/0, 2/0
Suitable For – Soft Lures and Hard Lures
Pack Quantity – 5 Pieces

VMC Cheb Lok are exceptionally strong and highly durable hooks designed specifically for soft lure fishing. Built to withstand the demands of modern predator angling, these hooks combine robust wire construction with a sharp, reliable point that performs consistently session after session.

The epoxy dot on the shank is a practical detail that keeps soft lures securely in place. It prevents the lure from sliding down the hook during casting or when working the lure through the water, so your presentation stays exactly as intended. This is particularly useful when fishing with soft plastics that need to sit correctly on the hook to swim properly.

Each hook is finished with a PTFE coating, which provides resistance to water, corrosion and other environmental factors. This coating also contributes to smooth hook penetration and helps maintain the hook's sharpness over time. The result is a hook that stays effective in both freshwater and saltwater environments.

The hooks are very sharp straight out of the packet and feature a barb to keep hooked fish secure. A large eye makes them easy to attach to a wide range of leaders, snaps and rigs, and simplifies tying when using thicker lines or when fishing in low light.

Available in a choice of sizes, these hooks suit a variety of soft lure presentations. Whether you are targeting perch, zander, pike or other predators, the VMC Cheb Lok offers the strength and reliability needed for confident hook holds.

Technical Specifications:

Brand – VMC
Model – Cheb Lok
Product Type – Hooks for Soft Lures
Coating – PTFE
Special Feature – Epoxy Dot to Prevent Lure Slippage
Hook Point – Very Sharp with Barb
Eye – Large
Available Sizes – 2, 4, 6, 8
Pack Quantity – 5 Pieces
Target Species – Perch, Zander, Pike and Other Predators
Fishing Techniques – Soft Lure Fishing
Suitable For – Freshwater and Saltwater

VMC Cheb Offset are large, very strong and exceptionally durable offset hooks designed for big soft lures. Their elongated hook shape helps to reduce missed bites, while the raised step and special epoxy point prevent the lure from sliding down the shank.

The hooks are finished with a PTFE coating that resists water, corrosion and other environmental influences, helping to maintain reliable performance over repeated sessions. Each hook is very sharp, features a barb and has a large eye, making it suitable for a range of rigging approaches with bulky soft plastics.

The offset design is particularly useful when fishing large, soft lures where the hook point needs to sit protected within the body of the lure. This helps to keep the presentation snag-resistant while still allowing a positive hook set when a fish takes. The elongated bend and wide gape provide plenty of room for the lure material, which can be an advantage when using thicker or heavily salted soft baits.

The raised step and epoxy point are practical details that help hold the lure securely in position. By reducing the chance of the soft plastic sliding down the hook shank, the lure stays correctly rigged for longer, so you can spend more time fishing and less time re-rigging. This is especially useful when casting repeatedly or working a lure through cover.

The PTFE coating not only contributes to corrosion resistance but also helps the hook move smoothly through the water and penetrate cleanly. The large eye accommodates a range of line types and leader materials, while the barb helps to keep hooked fish secure during the fight.

Available in a choice of sizes to suit different lure presentations:

• Size 2 – 6 pcs – 3.4 cm
• Size 4 – 6 pcs – 3.1 cm
• Size 1 – 5 pcs – 3.7 cm
• Size 1/0 – 5 pcs – 4 cm

Technical Specifications:

Brand – VMC
Model – Cheb Offset
Product Type – Offset Hooks
Use – Big Soft Lures
Hook Shape – Elongated Offset
Coating – PTFE
Coating Properties – Water and Corrosion Resistant
Hook Point – Sharp with Barb
Eye – Large
Special Features – Raised Step, Epoxy Point to Prevent Lure Slippage
Available Sizes – 2 (6 pcs, 3.4 cm), 4 (6 pcs, 3.1 cm), 1 (5 pcs, 3.7 cm), 1/0 (5 pcs, 4 cm)

VMC Bladed Hybrid treble hooks are a specialist terminal tackle choice for anglers who want to combine a strong, reliable hook with an additional visual and vibration attractor. These hooks are forged from very high quality carbon steel, giving them the strength and durability needed when fishing for hard-fighting predators and when using lures that place sustained pressure on the hook points.

The defining feature of the Bladed Hybrid is the small blade attached to the hook via a swivel. This blade is free to move through a full 360-degree rotation underwater, flashing and creating vibration as it turns. That combination of flash and vibration can draw a fish's attention even in coloured water or low-light conditions, making the hook more than just a holding point.

Because the blade is mounted on a swivel, it can rotate independently of the hook body. This helps the blade to keep working naturally as the lure moves through the water, rather than locking up or twisting the hook out of position. The result is a presentation that continues to attract fish throughout the retrieve.

The hooks are suitable for use with both soft and hard lures. Whether you are rigging a soft plastic with a treble as a replacement hook, or fitting one to a hard bait, the Bladed Hybrid is designed to work across a range of lure presentations. The forged carbon steel construction provides the strength required for aggressive strikes and powerful runs.

Sharpness is a key part of the design. These hooks are made to be extremely sharp, helping to ensure a positive hook hold when a fish takes the lure. A sharp point is especially important when fishing with treble hooks, as it improves the chances of the hook finding purchase quickly.

The VMC Bladed Hybrid is available in a choice of sizes to suit different lure types and target species. Size 4, 6 and 8 are supplied in packs of 2 hooks, while size 10 is supplied in packs of 3 hooks. This allows anglers to select the appropriate size for their chosen lure and fishing situation.

For anglers who want to add extra attraction to their lures without changing the overall presentation, the VMC Bladed Hybrid offers a practical solution. The rotating blade adds flash and vibration, while the forged carbon steel hook provides the strength and sharpness needed to convert takes into landed fish.

Technical Specifications:

Brand – VMC
Model – Bladed Hybrid
Product Type – Treble Hooks
Material – Forged High Quality Carbon Steel
Construction – Forged
Blade – Swivel-Mounted, 360-Degree Rotation
Blade Function – Flash and Vibration Attraction
Suitable Lures – Soft Lures and Hard Lures
Available Sizes – 4, 6, 8, 10
Pack Quantity – Size 4: 2 pcs; Size 6: 2 pcs; Size 8: 2 pcs; Size 10: 3 pcs
Key Features – Very Strong, Durable, Extremely Sharp, Rotating Blade

VMC Bullet Jig 5/0 is a premium jig head made in France, designed for anglers who demand a sharp, strong and reliable hook for soft plastic fishing. The hook features a high carbon content, giving it exceptional strength and a sharp point that penetrates quickly and holds firmly.

The jig head is available in a range of weights, making it suitable for all soft silicone spinning lures. Whether you are fishing shallow or deep, you can choose the ideal weight to match the conditions and the size of your lure.

A special bait keeper on the shank firmly holds the soft lure in place, preventing it from sliding down the hook during casting or when working the lure through the water. This means less time re-rigging and more time fishing effectively.

This jig head is suitable for lures from 13 to 18 cm in length. The 5/0 hook size and 6 cm length provide a good balance for a wide range of soft plastics, from shads to worms and creature baits.

Available in multiple weights, each pack contains either 2 or 3 jig heads depending on the weight chosen. The VMC Bullet Jig is an excellent choice for targeting predatory fish such as pike, perch and zander in both freshwater and light saltwater environments.

Technical Specifications:

Brand – VMC
Model – Bullet Jig
Product Type – Jig Head
Hook Size – 5/0
Length – 6 cm
Material – High Carbon Steel Hook
Bait Keeper – Yes
Suitable Lure Length – 13–18 cm
Available Weights – 10 g (3 pcs), 12 g (3 pcs), 14 g (3 pcs), 18 g (2 pcs), 20 g (2 pcs)
Target Species – Pike, Perch, Zander
Fishing Technique – Soft Plastic Spinning

VMC Bullet Jig 4/0 is a premium jig head made in France, designed for anglers who fish soft plastic lures and demand a sharp, reliable hook with every cast. Built around a high-carbon steel hook, this jig head combines strength with a fine, needle-sharp point that penetrates quickly and holds firmly once set.

The hook is manufactured with a high carbon content, which gives it an excellent balance of hardness and resilience. This means it resists bending under pressure from powerful fish while still maintaining the sharpness needed for effective hooksets. The bullet-shaped head is designed to slip through the water with minimal resistance, making it ideal for fishing soft plastics in a variety of situations.

A key feature of the VMC Bullet Jig is its special bait keeper. This moulded collar grips the soft plastic firmly and prevents it from sliding down the hook shank during casting or when working the lure through the water. The result is a lure that stays in the correct position cast after cast, so you spend less time re-rigging and more time fishing effectively.

This jig head is suitable for soft plastic lures measuring 11 to 15 cm, making it a versatile choice for a wide range of silicone shads, worms and creature baits. The 4/0 hook size offers a generous gap that accommodates bulky soft plastics while still providing reliable hooking potential.

The VMC Bullet Jig is available in four weights to suit different fishing conditions and depths. Lighter weights are ideal for shallow water or slow presentations, while heavier weights allow you to fish deeper or cast into wind with better control. The available options are:

• 10 g – 3 pieces per pack
• 12 g – 3 pieces per pack
• 14 g – 3 pieces per pack
• 18 g – 2 pieces per pack

Whether you are targeting perch, zander or pike in freshwater, or fishing for bass and other predators in saltwater, the VMC Bullet Jig offers the sharpness, strength and bait-holding security that serious lure anglers look for. Its French manufacturing pedigree and high-carbon hook construction make it a dependable choice for soft plastic fishing.

Technical Specifications:

Brand – VMC
Model – Bullet Jig
Product Type – Jig Head
Hook Size – 4/0
Length – 5.5 cm
Material – High Carbon Steel Hook
Bait Keeper – Yes, special moulded keeper
Suitable Lure Size – 11–15 cm
Available Weights – 10 g, 12 g, 14 g, 18 g
Pack Quantity – 10 g: 3 pcs; 12 g: 3 pcs; 14 g: 3 pcs; 18 g: 2 pcs
Country of Manufacture – France
Fishing Technique – Jigging, soft plastic fishing
Target Species – Perch, zander, pike, bass
Suitable For – Freshwater and saltwater soft lure fishing

VMC Bullet Jig 3/0 is a premium jig head made in France, designed for anglers who demand a sharp, strong and reliable hook for soft plastic fishing. Built around a high-carbon steel hook, this jig head delivers the penetration and durability needed when targeting predatory fish with silicone lures.

The hook features a high carbon content, which contributes to its strength and edge retention. The point is extremely sharp out of the pack, allowing for confident hooksets even at range or in deep water. The bullet-shaped head is designed to slip through cover and swim naturally, making it a versatile choice for a wide range of soft lure presentations.

A key feature of the VMC Bullet Jig is the special bait keeper on the shank. This collar grips the soft plastic firmly and prevents it from sliding down the hook during casting or when working the lure through weeds and structure. This means less time re-rigging and more time fishing effectively.

This jig head is suitable for soft lures from 9 cm to 13 cm in length, making it a great match for a wide variety of shads, paddletails and curly tail grubs. The 3/0 hook size offers a good balance between holding power and a natural presentation for medium-sized soft baits.

Available in four weights, the VMC Bullet Jig allows you to adapt to different depths, currents and casting distances. The 8 g and 10 g versions are ideal for shallow water, slow retrieve and finesse presentations. The 12 g and 14 g options are better suited to deeper water, stronger currents or when you need extra casting distance.

Each pack contains 3 jig heads, giving you a ready supply for a session. Whether you are fishing for perch, zander, pike or other predators, the VMC Bullet Jig offers a dependable combination of sharpness, strength and secure lure retention.

Technical Specifications:

Brand – VMC
Model – Bullet Jig
Product Type – Jig Head
Hook Size – 3/0
Length – 5 cm
Material – High Carbon Steel Hook
Bait Keeper – Special Collar to Secure Soft Lures
Suitable Lure Length – 9–13 cm
Available Weights – 8 g, 10 g, 12 g, 14 g
Pack Quantity – 3 pieces
Country of Manufacture – France
Fishing Technique – Soft Lure Spinning, Jigging
Target Species – Perch, Zander, Pike, Predatory Fish

VMC Bullet Jig 2/0 is a premium jig head made in France, designed for anglers who demand sharpness, strength and reliable lure presentation when fishing soft plastic lures. The head is built around a very sharp, exceptionally strong hook that contains a high proportion of carbon fibre, giving it the durability needed for repeated casts and confident hooksets.

The bullet-shaped head is a classic design for soft lure fishing. It cuts through the water cleanly and helps the lure track straight, making it a dependable choice for a wide range of soft plastic presentations. Whether you are working a lure slowly along the bottom or retrieving it with a steady swimming action, the bullet profile keeps the bait stable and natural in the water.

One of the standout features of this jig head is the special bait keeper. This moulded collar grips the soft plastic firmly and prevents it from sliding down the hook shank during casting or when the lure is bumped along the bottom. The result is less time re-rigging and more time fishing, with the lure staying exactly where you positioned it on the hook.

The hook itself is made from high-carbon steel, which combines sharpness with strength. The wide gap and fine point are suited to soft lures, allowing the hook to penetrate cleanly when a fish takes. The 2/0 size is a versatile option that pairs well with a broad range of soft plastic shapes and sizes.

This jig head is suitable for soft lures from 7 cm to 10 cm, making it a practical choice for a variety of freshwater and light saltwater presentations. The 4.4 cm overall length gives a balanced profile that works well with both slim and bulky soft baits.

The VMC Bullet Jig is available in three weights, each supplied in packs of three:

• 8 g – 3 pcs
• 12 g – 3 pcs
• 14 g – 3 pcs

Choosing the right weight depends on water depth, current and the speed at which you want the lure to sink. Lighter heads are ideal for shallow water and slow presentations, while heavier heads are better suited to deeper water, stronger currents or when you need to reach the bottom quickly.

Made in France by VMC, a brand with a long-standing reputation for quality hooks and terminal tackle, the Bullet Jig is a reliable choice for anglers who fish soft plastics regularly. Its combination of a sharp, strong hook, secure bait keeper and proven bullet head shape makes it a practical addition to any soft lure angler's tackle box.

Technical Specifications:

Brand – VMC
Model – Bullet Jig
Product Type – Jig Head
Hook Size – 2/0
Length – 4.4 cm
Material – High-Carbon Steel Hook
Bait Keeper – Special Moulded Collar
Suitable Lure Size – 7–10 cm
Available Weights – 8 g, 12 g, 14 g
Pack Quantity – 3 pcs per pack
Country of Manufacture – France
Fishing Technique – Soft Lure Fishing
Suitable For – Soft Plastic Lures

VMC Bullet Jig 1/0 is a premium jig head made in France, designed for anglers who demand a sharp, reliable hook and a secure hold on soft plastic lures. Built around a high-carbon steel hook, this jig head delivers the strength and penetration needed when targeting predatory fish with soft baits.

The hook features a very sharp point and a strong, high-carbon construction that resists bending under pressure. This makes the Bullet Jig a dependable choice for both freshwater and light saltwater spinning, where a solid hookset can make the difference between landing a fish and losing it.

A key feature of this jig head is the special barbed keeper on the shank. This keeper grips the soft plastic firmly and prevents it from sliding down the hook, so your lure stays in the correct position cast after cast. The result is a more natural presentation and fewer missed strikes.

The VMC Bullet Jig is suitable for soft plastic lures measuring 6-8 cm, making it ideal for a wide range of silicone shads, worms and creature baits. Whether you are fishing a slow, bottom-hugging retrieve or a steady mid-water swim, the bullet-shaped head helps the lure track straight and sink predictably.

Available in five weights, this jig head can be matched to different depths, currents and lure sizes. Lighter weights are well suited to shallow water and a slow fall, while heavier weights help you reach deeper water or fish in stronger currents. The 1/0 hook size offers a good balance between holding power and a natural lure action.

Each pack contains 3 jig heads, giving you a practical supply for a session on the water. The VMC Bullet Jig is a versatile choice for perch, pike, zander and other predatory species when fished with soft plastics.

Available weights:
6 g - 3 pcs
8 g - 3 pcs
10 g - 3 pcs
12 g - 3 pcs
14 g - 3 pcs

Technical Specifications:

Brand – VMC
Model – Bullet Jig
Product Type – Jig Head
Hook Size – 1/0
Length – 4 cm
Material – High-Carbon Steel Hook
Construction – Bullet-Shaped Jig Head with Barbed Keeper
Available Weights – 6 g, 8 g, 10 g, 12 g, 14 g
Pack Quantity – 3 pcs
Suitable Lure Size – 6-8 cm Soft Plastics
Target Species – Perch, Pike, Zander
Fishing Techniques – Soft Plastic Spinning, Jigging
Made In – France

VMC Bullet Jig is a premium range of jig heads manufactured in France, designed for anglers who demand a sharp, strong and reliable hook for soft plastic lure fishing. Each jig head is built around a high-carbon steel hook that delivers excellent penetration and holding power, making it a dependable choice for both freshwater and light saltwater spinning.

The hook features a high carbon content, which contributes to its strength and durability. This construction helps the hook resist bending under pressure while maintaining a sharp point, so you can fish with confidence when targeting predatory species.

A key feature of the VMC Bullet Jig is the special bait keeper on the shank. This keeper grips soft plastic lures firmly and prevents them from sliding down the hook, keeping your presentation in the correct position cast after cast. This is particularly useful when fishing with soft shads, grubs and other silicone lures that can otherwise slip during retrieve or on the drop.

This particular jig head is size 2 with a length of 3 cm, making it ideally suited to soft lures in the 4–6 cm range. It is a versatile choice for finesse presentations, drop shotting, jigging and general soft lure fishing where a compact, natural presentation is required.

The VMC Bullet Jig is available in different weights to suit varying fishing conditions and depths. The 2 g option is supplied in packs of 4 pieces, while the 6 g option is supplied in packs of 3 pieces. Lighter weights are useful for shallow water and slow presentations, while heavier weights help you reach deeper water or fish in stronger currents.

Whether you are targeting perch, zander, pike or other predators with soft plastics, the VMC Bullet Jig offers a reliable combination of sharpness, strength and secure lure retention. Its French manufacturing pedigree and thoughtful design make it a solid addition to any lure angler's tackle box.

Technical Specifications:

Brand – VMC
Model – Bullet Jig
Product Type – Jig Head
Hook Size – 2
Length – 3 cm
Material – High Carbon Steel Hook
Bait Keeper – Yes, special keeper to hold soft lures
Suitable Lure Size – 4–6 cm
Available Weights – 2 g (4 pcs), 6 g (3 pcs)
Country of Manufacture – France
Fishing Techniques – Jigging, soft lure fishing, drop shotting
Target Species – Perch, zander, pike and other predatory fish

VMC Bullet Jig Head is a premium jig head manufactured in France, designed for anglers who demand sharp hooks and reliable soft lure presentation. This jig head is ideal for a wide range of soft plastic lures used in spinning and jigging.

The hook is made from high-carbon steel, ensuring exceptional sharpness and strength. The bullet-shaped head allows for smooth penetration through water and vegetation, while the special bait keeper barb securely holds the soft lure in place, preventing it from sliding down the hook shank during casts and retrieves.

This jig head is specifically suited for soft lures measuring 5–7 cm. It is available in three weights: 4 g (pack of 4), 6 g (pack of 3), and 8 g (pack of 3). The size 1 hook with a length of 3.5 cm provides a balanced hooking point for a variety of soft baits.

Whether you are targeting perch, zander, or pike in freshwater or light saltwater environments, the VMC Bullet Jig Head offers the quality and performance you need. The precise engineering ensures that your soft lure swims naturally and remains securely attached, giving you confidence with every cast.

Technical Specifications:

Brand – VMC
Model – Bullet Jig
Product Type – Jig Head
Hook Size – 1
Length – 3.5 cm
Material – High-Carbon Steel Hook
Available Weights – 4 g (4 pcs), 6 g (3 pcs), 8 g (3 pcs)
Suitable Lure Size – 5–7 cm
Special Features – Bait Keeper Barb
Target Species – Perch, Zander, Pike
Fishing Techniques – Spinning, Jigging
Manufactured In – France

Mebao Hook Disgorger is an essential tool for every angler's tackle box, designed to help you quickly and easily remove a deeply embedded hook from the mouth of your catch. Whether you are targeting specimen fish or simply want to ensure the welfare of the fish you release, this disgorger allows you to unhook your catch efficiently while minimising stress and damage to the fish.

Manufactured from strong and durable PC plastic, this hook disgorger is built to withstand the rigours of regular fishing sessions. The robust construction ensures the tool maintains its shape and effectiveness over time, making it a reliable addition to your angling equipment. The material is also lightweight, so it can be easily carried in a pocket or tackle box without adding unnecessary weight.

The disgorger features two different sized disgorging slots to accommodate a variety of hook sizes. One end has a 9mm slot, while the other end has a 13mm slot. This dual-ended design means you can choose the appropriate size for the hook you are using, ensuring a secure grip on the hook shank and making removal quick and simple. The slots are shaped to guide the hook out smoothly, reducing the risk of tearing or further embedding the hook.

With an overall length of 15.5cm, this tool provides ample reach to access hooks that are set deep in a fish's mouth. The length also gives you good control and leverage, allowing you to apply gentle, steady pressure to back the hook out. The compact size makes it easy to store in a tackle box, bag or even a pocket, so it is always to hand when you need it.

Using a hook disgorger is a responsible angling practice that helps to preserve fish health and improve survival rates for catch-and-release fishing. By using the Mebao Hook Disgorger, you can unhook fish quickly and with minimal handling, reducing stress and the risk of injury. This is particularly important when fishing for species that are delicate or when practising catch and release.

This hook disgorger is suitable for a wide range of fishing situations, from coarse and match fishing to predator fishing and sea angling. It is a versatile tool that every angler should have in their kit, whether you are a beginner or an experienced angler. The simple yet effective design makes it easy to use, and the durable construction ensures it will last for many seasons.

Technical Specifications:

Brand – Mebao
Product Type – Hook Disgorger
Material – PC Plastic
Length – 15.5cm
Disgorger Slot Sizes – 9mm and 13mm
Colour – Not specified
Quantity – 1 piece
Target Species – All fish species
Fishing Techniques – Coarse, match, predator, sea fishing
Suitable For – Removing hooks from fish mouths

Bearking Zeus Air is a spinning reel series built around exceptional lightness, smooth operation and refined control. Designed for both newcomers and experienced anglers, the Zeus model combines a solid construction with the kind of reliability that stands up to regular, intensive use. Whether you are refining your light lure presentation or simply want a dependable reel for everyday sessions, the Zeus Air is intended to deliver consistent performance without unnecessary weight.

The reel body is made from a lightweight yet strong aluminium alloy, a material chosen for its favourable strength-to-weight ratio and its resistance to corrosion. This helps extend the working life of the reel and makes it a practical choice for anglers who fish frequently in varied conditions. The use of aluminium alloy also contributes to the overall low weight of the reel, which is particularly noticeable when fishing for extended periods.

Inside, the Zeus Air is fitted with 9+1 high-quality stainless steel HPCR bearings. These bearings are intended to provide smooth and even rotation throughout the retrieve, supporting a fluid feel when working lures or retrieving line. The bearing count and HPCR specification are confirmed features of this model and form part of its smooth-running character.

The reel also features digitally milled, particularly precise gears, a construction detail that supports consistent meshing and contributes to the refined feel of the retrieve. A CNC-machined aluminium handle adds rigidity and a precise fit, while the carbon fibre reinforced drag system is designed to offer dependable stopping power when a fish makes a run. These elements together reflect the Zeus Air's focus on smooth operation and durable construction.

The Bearking Zeus Air is available in multiple sizes, making it possible to match the reel to different fishing situations. The 2000 size weighs only 163 g, underlining the series' lightweight design philosophy. The 2000 size is particularly well suited to XUL fishing, where low weight and smooth operation are especially valuable. Other sizes in the range offer additional options for anglers who need a different balance of line capacity and reel size.

For anglers who value high quality and reliability, the Bearking Zeus Air represents a considered choice. Its combination of a lightweight aluminium alloy body, stainless steel HPCR bearings, digitally milled gears, a CNC aluminium handle and a carbon fibre reinforced drag system makes it a versatile reel for light and general spinning applications. The series is aimed at those who want a smooth, refined retrieve without sacrificing the solidity expected from a dependable fishing reel.

Technical Specifications:

Brand – Bearking
Model – Zeus Air
Product Type – Spinning Reel
Body Material – Lightweight Aluminium Alloy
Bearings – 9+1 Stainless Steel HPCR Bearings
Gears – Digitally Milled, High Precision
Handle – CNC-Machined Aluminium
Drag System – Carbon Fibre Reinforced
Available Sizes – 2000, 2500, 3000
Weight – 163 g (2000 size)
Corrosion Resistance – Aluminium Alloy Construction
Special Features – Lightweight Design, Smooth Retrieve, Precise Gearing
Suitable For – XUL Fishing, Light Spinning, General Spinning
Fishing Techniques – Light Lure Fishing, XUL, Spinning

Pro FL Crimp Sleeves for Thin Hooklengths are precision-made crimping tubes designed for constructing neat, reliable hooklengths and rigs where a slim, low-profile connection is required. Supplied in a pack of 50, they offer a practical solution for anglers who prefer to build their own rigs rather than rely on knots alone.

Each sleeve is formed from metal tubing that is intended to be compressed firmly over the line with a crimping tool. When used correctly, this creates a secure, tidy join that sits neatly on the rig and helps to keep the presentation streamlined. The small diameter of these sleeves makes them particularly suited to thin hooklength materials, where bulky knots or oversized connectors can compromise both presentation and rig behaviour.

Crimping is a well-established rig-building technique that many carp, coarse and specimen anglers use for hooklengths, hair rigs and similar presentations. By choosing the correct sleeve size for the diameter of line in use, anglers can achieve a consistent connection that is quick to produce once the method is mastered. This is especially useful when tying multiple rigs to the same pattern or when preparing hooklengths in advance of a session.

The Pro FL Crimp range is available in different diameters to suit a variety of line thicknesses. This listing covers the 0.6 mm and 0.9 mm options, allowing you to select the size that best matches your chosen hooklength material. Using a sleeve that is appropriately matched to the line diameter is important for achieving a neat and dependable crimped connection.

Supplied in a pack of 50, these crimp sleeves are a useful addition to any rig wallet or tackle box. They are small, light and easy to store, making them convenient to carry for both short sessions and longer trips. Whether you are refining a favourite rig or experimenting with new hooklength arrangements, having a supply of crimps to hand helps you adapt your presentation on the bank.

For best results, always use a suitable crimping tool and follow the recommended crimping method for the line and sleeve combination you are using. Take care to select the correct sleeve diameter, compress the crimp evenly and check the finished connection before fishing. Correctly made crimped joints provide a tidy and practical way to assemble thin hooklengths for a range of coarse and specimen fishing situations.

Technical Specifications:

Brand – Pro FL
Model – Crimp
Product Type – Crimp Sleeves / Rig Accessories
Use – Construction of thin hooklengths and rigs
Pack Quantity – 50 pieces
Available Diameters – 0.6 mm, 0.9 mm
Material – Metal tubing
Colour – Not specified
Suitable For – Coarse fishing, carp fishing and specimen rig building
Fishing Techniques – Rig building, hooklength construction, hair rigs
Key Features – Slim profile, multiple diameters available, 50 pieces per pack

Miracle Fish Line Cutting Scissors are a lightweight, compact cutting tool designed for anglers who need a reliable way to trim and cut fishing line quickly and accurately. Small enough to sit comfortably in a tackle box, pocket or on a lanyard, they are a practical everyday accessory for both bank and boat fishing.

The scissors are made from high-quality steel, giving the blades a durable cutting edge that is well suited to the demands of regular fishing use. The compact format means they can be kept close at hand, so line can be trimmed when tying rigs, changing hooks or tidying up knots without having to search through a full tackle bag.

A key detail is the blade design: one blade features fine serrations. These small grooves help to grip the line as it is cut, which reduces the tendency for the line to slip between the blades. This is particularly useful when working with smooth or slippery monofilament and braided lines, where a clean cut is important for neat knots and reliable rigs.

Because the scissors are lightweight and compact, they add very little weight to a tackle box or fishing vest. They are easy to carry as part of a general accessory kit and are suitable for a wide range of freshwater and sea fishing situations where line needs to be cut to length.

Typical uses include trimming tag ends after tying knots, cutting line to length when making up rigs, and shortening or adjusting hooklengths. The serrated blade helps to hold the line steady during these tasks, which can make the job quicker and more controlled, especially in cold or wet conditions when fingers are less nimble.

As a simple, functional accessory, the Miracle Fish Line Cutting Scissors are a sensible addition to any angler's kit. They are not intended to replace heavy-duty cutters for thick wire or large-diameter leader material, but for everyday line trimming they offer a convenient combination of compact size, steel construction and a blade design that helps prevent the line from slipping.

Technical Specifications:

Brand – Miracle Fish
Model – Line Cutting Scissors
Product Type – Fishing Line Scissors / Cutting Tool
Material – High-Quality Steel
Construction – Compact Scissors with Serrated Blade Section
Blade Design – One Blade with Fine Serrations to Reduce Line Slippage
Format – Lightweight and Compact
Function – Cutting and Trimming Fishing Line
Suitable For – Trimming Tag Ends, Making Up Rigs, Adjusting Hooklengths
Fishing Techniques – General Coarse, Match, Carp and Sea Fishing
Key Features – Lightweight, Compact, High-Quality Steel, Anti-Slip Serrated Blade