List of products by brand Pro FL

Pro FL Rubberised Landing Net 3m is a practical landing and retaining net designed for the angler who wants to handle fish quickly, safely and with minimal stress to the catch. The rubberised mesh is the standout feature of this model, offering a range of benefits that make it a sensible choice for both match and pleasure angling.

The rubberised netting does not retain the smell of fish, which helps to keep your tackle and vehicle free from lingering odours after a session. This makes the net particularly convenient for anglers who fish regularly and want equipment that stays fresh and easy to manage.

Cleaning is quick and straightforward. The rubberised material rinses clean easily and dries fast, so the net can be packed away without the prolonged drying times associated with traditional soft mesh. This is a real advantage when travelling between venues or storing gear in a confined space.

The net is supplied with a transport case, making it simple to carry and store while protecting the mesh from damage. A ground spike is also included, allowing the net to be pushed securely into the bank. This keeps the net upright and within easy reach, which is especially useful when you need to land a fish quickly without fumbling for a resting place.

Because the rubberised mesh is gentle on fish, fish remain lively for longer when retained in the net. This supports better fish care and makes the net suitable for anglers who practise catch-and-release or who need to hold fish briefly before weighing, photographing or returning them.

With a 3 m length and a 45 cm diameter head, the net offers a useful reach for bank fishing and general coarse angling. The length helps you reach over marginal vegetation or steep banks, while the 45 cm head provides enough room to land fish comfortably.

Technical Specifications:

Brand – Pro FL
Model – FL 3m
Product Type – Rubberised Landing Net
Mesh – Rubberised
Length – 3 m
Head Diameter – 45 cm
Transport Case – Included
Ground Spike – Included
Key Features – Does not retain fish odour, quick to rinse and dry, keeps fish lively for longer
Suitable For – Bank fishing, coarse angling, catch-and-release

Pro FL Pellet Soaking Box with Inner Container is a practical bait storage solution designed specifically for soaking pellets before a fishing session. The set consists of a sturdy outer box and a removable inner container, allowing pellets to be soaked, drained and stored cleanly without mess.

The box is built from durable, hard-wearing material that stands up to regular use bankside. Its robust construction protects the contents during transport and keeps soaked pellets secure in a tackle bag or bucket.

A key feature is the very tight-sealing lid. Once closed, the box holds its contents securely, helping to prevent leaks and spills. This makes it a reliable choice for anglers who prepare pellets at home or in the car and want to avoid liquid escaping into other tackle.

The removable inner container adds versatility. It can be used to soak pellets separately, to drain excess liquid, or to keep different bait types apart within the same box. This simple two-part design makes the preparation process tidier and more efficient.

The set is suitable for a range of coarse fishing situations where pellets are used, including feeder fishing, method feeder work and general bait preparation. It is equally useful for storing other small bait items that need to be kept contained and protected.

Compact and easy to carry, the Pro FL Pellet Soaking Box with Inner Container is a straightforward, well-made accessory for anglers who want a clean and organised approach to bait preparation.

Technical Specifications:

Brand – Pro FL
Model – Pellet Soaking Box with Inner Container
Product Type – Bait Storage Box / Pellet Soaking Box
Material – Durable hard-wearing material
Construction – Outer box with removable inner container
Lid – Very tight-sealing
Included Accessories – Inner container
Special Features – Secure closure, removable inner tray
Suitable For – Soaking and storing pellets, bait preparation
Fishing Techniques – Feeder fishing, method feeder, general coarse fishing

Pro FL Tackle Carp Rigs Box is a double-sided rig storage box designed for carp anglers who want their tied rigs organised, protected and ready to fish. Rather than piercing every hook through foam, this box uses a dedicated pin system: the hook simply hooks onto the pin, while the end of the rig is secured with a small pin into the soft EVA foam. This keeps each rig neatly in place and makes it quick to remove and re-position without damaging hook points or line.

The double-sided layout gives you two working surfaces in one compact unit, so you can store a larger number of rigs while keeping them separated. That separation is useful when you are carrying different hooklink materials, hook sizes or rig patterns and want to avoid tangles and crossed lines in transit.

The body is built around soft EVA foam, which grips hooks, swivels and rig components gently but firmly. Because the foam is soft, it is less likely to blunt hook points than harder materials, and it holds rigs securely even when the box is moved around in a carryall or rucksack.

The box closes with magnets, giving a very secure seal without clips or latches that can snag on other tackle. The magnetic closure also makes the box quick to open and close with cold or wet hands, which is a practical advantage on the bank.

Supplied with pins included, the box is ready to use straight away. The pin system is particularly suited to anglers who tie rigs at home and want a tidy, repeatable way to store them before a session.

Dimensions – 33 x 12.5 x 3.8 cm. The slim profile fits easily into a tackle box, carryall or rucksack pocket, making it a practical choice for carp, specimen and general coarse fishing where ready-tied rigs are part of the approach.

Technical Specifications:

Brand – Pro FL
Model – Tackle Carp Rigs Box
Product Type – Rig Storage Box
Construction – Double-Sided
Hook Retention – Pin System (Hook Hooks Onto Pin)
Rig End Fixing – Pin Into Soft EVA Foam
Foam Material – Soft EVA Foam
Closure – Magnetic
Included Accessories – Pins
Dimensions – 33 x 12.5 x 3.8 cm
Fishing Techniques – Carp Fishing, Specimen Fishing, Coarse Fishing
Suitable For – Storing Tied Rigs

Pro FL Tackle Rig Board Box is a double-sided rig storage box designed for anglers who want to keep pre-tied rigs organised, protected and ready for use. It is a practical accessory for carp, coarse and specimen fishing, where having several rigs prepared in advance can save valuable time on the bank.

The box is fitted with 11 cm plastic rig holders that are used to secure tied rigs neatly in place. The holders are attached inside the box by magnets, which makes it easy to keep them in position and to rearrange or replace them when required. This magnetic fixing system also helps to keep the contents secure and tidy during transport.

Because the box is double-sided, it offers storage on both sides, allowing you to separate different rig patterns, hook sizes or presentations. This can be particularly useful when you want to keep rigs for different situations clearly divided and easy to find.

The box contains 9 rig holders, giving you a useful amount of storage for a session or a short trip. Its compact dimensions of 15.1 x 7.8 x 2.8 cm make it easy to fit into a tackle box, carryall or rucksack without taking up excessive space.

Magnets built into the box help to ensure the lid stays closed and the contents remain contained. This is a simple but effective detail for anglers who carry rigs in a bag or box alongside other tackle.

Overall, the Pro FL Tackle Rig Board Box is a practical rig storage solution for anglers who like to prepare rigs in advance and keep them tangle-free, organised and close to hand.

Technical Specifications:

Brand – Pro FL
Model – Tackle Rig Board Box
Product Type – Rig Storage Box
Construction – Double-Sided
Rig Holders – 11 cm Plastic Holders
Holder Fixing – Magnetic
Number of Holders – 9
Closure – Magnets
Dimensions – 15.1 x 7.8 x 2.8 cm
Suitable For – Storing Pre-Tied Rigs

Pro FL Tackle Rig Board Box is a double-sided hooklength storage box designed for anglers who want their rigs and hooklengths organised, protected and ready to fish. Whether you are fishing commercial carp waters, natural venues or match-style lakes, keeping hooklengths tangle-free and correctly sized is essential, and this compact rig board makes that simple.

The box is double-sided, giving you two working surfaces for storing tied hooklengths. Inside, dedicated holders are clearly marked with lengths in millimetres, so you can quickly identify and select the right hooklength for the swim or presentation you are fishing. This is particularly useful when you carry a range of hooklength lengths for different baits, hook sizes and feeding situations.

Magnetic holders keep the rig board securely closed and make opening and closing the box quick and convenient, even with cold or wet hands. The magnetic closure also helps prevent the box from accidentally falling open in your carryall or seatbox, keeping your hooklengths tidy and protected during transport.

The box is described as very airtight, which helps protect stored hooklengths from moisture, dust and dirt. Keeping hooklengths dry and clean helps maintain the condition of your line and hooks, so they are ready for use when you arrive at the bank.

With compact dimensions of 15.1 x 7.8 x 2.8 cm, the Pro FL Tackle Rig Board Box fits easily into a tackle box, carryall, seatbox drawer or rucksack pocket. It is a practical storage solution for pole rigs, feeder hooklengths, method feeder hooklengths and other pre-tied rigs.

Technical Specifications:

Brand – Pro FL
Model – Tackle Rig Board Box
Product Type – Hooklength Storage Box / Rig Board
Construction – Double-Sided
Internal Holders – Lengths Marked in Millimetres
Closure – Magnetic Holders
Sealing – Very Airtight
Dimensions – 15.1 x 7.8 x 2.8 cm
Suitable For – Storing Hooklengths and Pre-Tied Rigs

Pro FL Slow Dissolving PVA Bags 7x14cm (25 pcs) are designed for carp and other large fish angling when you need your bait to be exactly where your hookbait is. These slow dissolving PVA bags allow you to present loose feed, pellets or groundbait directly around the hook, creating a concentrated feeding area that can draw fish to your rig.

Using the bags is simple and effective. Fill the PVA bag with your chosen bait, attach it to the hook and cast out. Once the rig settles on the lakebed, the bag dissolves and releases its contents exactly at the spot where your hookbait is lying. This ensures that any fish investigating the free offerings will find your hookbait among them, increasing your chances of a take.

The slow dissolving nature of these bags is particularly useful in warmer water conditions, where standard PVA can break down too quickly. The controlled release gives you time to position your rig accurately and ensures the bait is still protected during the cast and on impact with the water.

Each pack contains 25 bags, each measuring 7x14cm. This size is ideal for a variety of bait presentations, from small pellets to crumbed boilies and groundbait mixes. The bags are suitable for use with a wide range of rigs, including inline leads, helicopter rigs and method feeders.

Whether you are fishing a short session or a longer campaign, these PVA bags offer a convenient and reliable way to present your bait with precision. They are a must-have accessory for any carp angler looking to improve their bait presentation and increase their catch rates.

Technical Specifications:

Brand – Pro FL
Product Type – PVA Bags
Model – Slow Dissolving
Size – 7x14cm
Quantity – 25 pieces per pack
Dissolving Speed – Slow
Best Used In – Warm water
Application – Carp and large fish angling
Compatibility – Suitable for various rigs and baits

Pro FL Tele Carp 3.90m 160-360g is an exceptionally powerful and robust telescopic float rod built for anglers who demand strength, reach and reliability. Designed around a carbon fibre blank and fitted with unusually large rod guides, it is a rod that copes confidently with demanding conditions, including strong currents and long-range float fishing.

The standout feature of this rod is its oversized guide set. The first guide measures 3.8 cm in width, which allows the line to flow freely during the cast and reduces friction as line peels off the reel. In practice, this supports smoother casting and helps the rod handle long distances with less effort, making it a practical choice when you need to present a float well out from the bank.

The blank is made from carbon fibre, a material chosen for its favourable combination of low weight and stiffness. This gives the rod a responsive feel while retaining the backbone needed to control hard-fighting fish. The rod is described as not afraid of heavy loads, so it is well suited to situations where powerful fish and challenging swims put real pressure on the tackle.

Comfort during long sessions has been considered as well. The handle is made from EVA material, which remains comfortable to grip and does not feel cold to the touch during the colder months. This is a useful detail for anglers who fish through autumn and winter, when metal or hard composite handles can become unpleasant to hold for extended periods.

At the tip, a protective cap is fitted to prevent the guides from folding or becoming damaged when the rod is collapsed. Because telescopic rods are frequently extended and retracted, this kind of protection helps preserve the guide set and keeps the rod ready for use.

As a telescopic float rod, the Pro FL Tele Carp packs down compactly for transport and storage while still offering a full 3.90 m fishing length when extended. The 160-360 g casting weight range indicates a rod with substantial power, capable of casting heavier floats and rigs when conditions call for it. It is a sensible option for float fishing in rivers and stillwaters where distance, current and strong fish are part of the challenge.

Technical Specifications:

Brand – Pro FL
Model – Tele Carp
Product Type – Telescopic Float Rod
Length – 3.90 m
Casting Weight – 160-360 g
Material – Carbon Fibre
Handle Material – EVA
First Guide Width – 3.8 cm
Guide Type – Large Diameter Guides
Tip Protection – Protective Cap
Construction – Telescopic
Fishing Technique – Float Fishing
Suitable Waters – Rivers and Stillwaters
Special Features – Powerful Blank, Large Guides, Cold-Resistant EVA Handle

Pro FL Bite Alarm Set 4+1 is a complete bite indication system comprising four bite alarms and a wireless receiver, designed for anglers who want clear, reliable bite indication across multiple rods. When a bite occurs, the receiver sounds an audible alert and lights up in the same colour as the alarm that has been triggered, allowing you to identify the active rod instantly without leaving your position.

The wireless receiver offers an operating range of 300 to 500 metres, giving you the freedom to move away from your rods while remaining fully aware of any activity. This makes the set particularly useful for larger swims, overnight sessions and situations where you prefer to stay mobile around the bank.

Each alarm features a vibration mode alongside 8 different sound, tone and sensitivity settings, so you can fine-tune the response to match the conditions and your personal preference. The 6 bright LEDs with adjustable brightness ensure the alarms remain clearly visible in low light, whether you are fishing at dawn, dusk or through the night.

The alarms are equipped with a socket for connecting swingers or bite indicators, which also illuminate when a bite is registered. This allows you to combine audible, visual and mechanical bite indication for a comprehensive setup.

All screws on both the alarms and the receiver are made from stainless steel, making the units fully water-resistant and suitable for use in wet weather and damp conditions. Each alarm illuminates in a different colour, and the corresponding colour is mirrored on the receiver when a bite occurs, so you can tell at a glance which rod has been activated.

The set is supplied with special plastic covers for the alarms, a sturdy and practical carry case for transport and storage, spare screws with a screwdriver, and batteries. Everything you need to get started is included in the box.

Technical Specifications:

Brand – Pro FL
Model – Bite Alarm Set 4+1
Product Type – Bite Alarm Set
Set Contents – 4 Bite Alarms and 1 Wireless Receiver
Receiver Range – 300–500 m
Alert Modes – Sound, Vibration, LED
Sound, Tone and Sensitivity Settings – 8
LED Indicators – 6 Bright LEDs
Brightness – Adjustable
Bite Indicator Socket – Yes, for Swingers / Bite Indicators
Screw Material – Stainless Steel
Water Resistance – Fully Water-Resistant
Colour Coding – Each Alarm Illuminates in a Different Colour, Mirrored on the Receiver
Included Accessories – Plastic Alarm Covers, Carry Case, Spare Screws, Screwdriver, Batteries

Pro FL FL 200L Baitcasting Reel is a multiplier reel designed to suit both newcomers to baitcasting and more experienced anglers looking for a dependable, easy-to-use reel for everyday fishing. Its combination of a robust body, smooth line lay and a lightweight anodised spool makes it a practical choice for a wide range of predator and bottom fishing situations.

The reel is built around a strong plastic body that is impact resistant, helping it cope with the knocks and bumps that come with regular bank and boat fishing. The solid construction gives the reel a reassuring feel in the hand while keeping the overall package manageable for long sessions.

Line lay is one of the FL 200L's key strengths. The reel lays line neatly and evenly across the spool, which supports consistent casting and helps reduce the risk of line bedding in during retrieves. Even line lay is particularly useful when fishing with braid or when making repeated casts with lures and bottom rigs.

The V-shaped double-anodised aluminium alloy spool is lightweight and corrosion resistant. The anodised finish helps protect the spool from the effects of moisture and salt, while the reduced weight of the spool contributes to long and accurate casts. The V-shape is a well-established design that assists line release during the cast.

An ergonomic handle provides a comfortable grip during retrieves, making the reel pleasant to use over extended periods. The handle design supports a natural hand position, which is helpful when working lures or retrieving rigs repeatedly.

High-quality stainless steel bearings are fitted to ensure smooth and quiet operation. Stainless steel is chosen for its resistance to corrosion, and the bearings help the reel run consistently during both casting and retrieving.

With its robust body, even line lay, lightweight anodised spool and smooth bearing system, the Pro FL FL 200L is a versatile multiplier reel suitable for anglers who want a reliable, fuss-free reel for general freshwater and light saltwater fishing.

Technical Specifications:

Brand – Pro FL
Model – FL 200L
Product Type – Baitcasting Reel / Multiplier Reel
Body Material – Strong Impact-Resistant Plastic
Spool – V-Shaped Double-Anodised Aluminium Alloy
Spool Properties – Lightweight, Corrosion Resistant
Line Lay – Even and Neat
Handle – Ergonomic
Bearings – High-Quality Stainless Steel
Operation – Smooth and Quiet
Suitable For – Beginners and Experienced Anglers

Pro FL Ultra Spin 2.10m 2-8/10-30g is a versatile 2-in-1 spinning rod designed for anglers who want one rod that can cover multiple lure fishing situations. Supplied with two different tip sections, it allows you to switch between an ultra-light setup and a more powerful all-round spinning setup depending on the lures and techniques you plan to use.

The rod comes with two tip options: one rated for lures from 2-8g and the other rated for lures from 10-30g. This dual-tip design makes the rod highly adaptable. With the lighter tip fitted, the rod becomes an ultra-light spinning rod, ideal for perch and other predators when fishing with small, lightweight lures. With the 10-30g tip, you can fish effectively with heavier lures such as spoons, wobblers and heavier soft plastics.

The blank is constructed using high-quality carbon fibre, which contributes to a responsive and sensitive feel. The rod is described as having a lively, resonant action that helps transmit information from the lure and the bottom, making it easier to stay in touch with what is happening underwater. The rod is also built with strong, next-generation guides that are designed to handle the demands of regular spinning use.

Thanks to its two tip options, the Pro FL Ultra Spin is a practical choice for anglers who fish a variety of waters and want to carry less equipment. It is suitable for river fishing and for targeting larger catches when using the heavier tip. Whether you are fishing light lures for perch or casting heavier spoons and wobblers, this rod offers a flexible solution in a single package.

The rod has an attractive design and is aimed at anglers looking for one rod that can cover different spinning methods. Its combination of a carbon fibre blank, dual tip ratings and robust guides makes it a strong option for those who want versatility without compromising on feel.

Technical Specifications:

Brand – Pro FL
Model – Ultra Spin
Product Type – Spinning Rod
Length – 2.10 m
Casting Weight – 2-8g / 10-30g (two tip sections)
Blank Material – High-Quality Carbon Fibre
Guides – Strong Next-Generation Guides
Action – Responsive and Sensitive
Number of Sections – 2 (with two interchangeable tips)
Fishing Technique – Spinning / Lure Fishing
Target Species – Perch and Other Predators
Suitable Waters – Rivers and Other Waters
Key Features – 2-in-1 Dual Tip Design, Ultra-Light and All-Round Spinning Capability

Pro FL FB 2000-4000 is a versatile fixed spool reel designed for spinning and bottom fishing. Whether you are casting lures for predators or presenting baits on the bottom, this reel delivers reliable performance across a range of freshwater and light saltwater applications.

The reel is built around three ball bearings, which provide smooth operation during retrieve and help reduce friction under load. This bearing setup contributes to a consistent, comfortable winding experience, particularly when working lures or retrieving rigs over distance.

One of the standout features of the FL FB is its twin spool system. The reel is supplied with a primary metal spool and a spare composite spool, giving you the flexibility to switch between different line strengths or types without needing to respool. This is particularly useful when adapting to changing conditions on the bank or when carrying a single reel for multiple setups.

Both spools feature a shallow profile, which offers a distinct advantage when fishing with thin lines. Because less line is required to fill the spool, thin diameters can be loaded efficiently without the need for excessive backing. A correctly filled shallow spool also helps maintain consistent line lay, which can contribute to smoother casting and more accurate lure presentation.

The reel incorporates a computer-balanced rotor, a design feature intended to minimise vibration during operation. By reducing rotational imbalance, the rotor helps deliver a smoother, more refined feel when winding, which can be especially noticeable during long retrieves or when working lures with subtle actions.

Additional technologies are integrated into the reel to further reduce vibration and enhance overall smoothness. These design elements work together to provide a more comfortable fishing experience, allowing you to focus on presentation and bite detection rather than on the reel's operation.

The FL FB is available in three sizes – 2000, 3000 and 4000 – covering a range of fishing situations. The smaller 2000 size suits light spinning and finesse applications, while the 3000 and 4000 sizes offer increased line capacity and are well suited to heavier lure work or bottom fishing where longer casts may be required.

With its combination of smooth bearing operation, versatile twin spool design and vibration-reducing technologies, the Pro FL FB is a practical choice for anglers seeking a dependable reel for spinning or bottom fishing.

Technical Specifications:

Brand – Pro FL
Model – FL FB
Product Type – Fixed Spool Reel
Ball Bearings – 3
Spools Included – 2 (1 metal primary, 1 composite spare)
Spool Profile – Shallow
Rotor – Computer-balanced
Vibration Reduction – Yes, integrated system
Available Sizes – 2000, 3000, 4000
Fishing Techniques – Spinning, Bottom Fishing
Suitable For – Freshwater and light saltwater fishing

Pro FL Murrow Spin 2.08m 0.2-6g is an ultralight spinning rod built for anglers who demand maximum finesse from their tackle. Weighing only 72 g, it is exceptionally light in the hand, making it an ideal choice for long sessions where fatigue would otherwise creep in. Whether you are targeting perch, trout or other small predatory species, this rod delivers the sensitivity needed to feel even the most tentative takes.

Constructed from durable carbon fibre, the Murrow Spin combines a low overall weight with the responsiveness that modern lure fishing requires. The carbon blank transmits vibrations efficiently, so you can detect subtle taps, plucks and follows that would go unnoticed with heavier, less sensitive rods. This makes it particularly effective when fishing soft plastics, small spinners and micro crankbaits where bite indication is everything.

The sensitive tip section plays a key role in lure control. It allows you to steer your lure accurately, feel its action through the retrieve and react instantly when a fish commits. For ultralight presentations, this level of feedback is invaluable, helping you to set the hook at the right moment and avoid dropping fish.

At 2.08 m, the rod length is a versatile compromise that suits both boat fishing and narrow rivers or streams. From a boat, the shorter length makes casting and manoeuvring easier, especially when space is limited. In small rivers, it provides enough reach to place lures accurately without being unwieldy among overhanging vegetation or tight swims.

The rod features a split EVA handle, a design choice that reduces weight while maintaining a comfortable, secure grip. EVA is a popular material for fishing handles because it offers good grip even when wet, and it does not become slippery with cold or damp hands. The split configuration further trims weight, contributing to the rod's overall balance and reducing hand fatigue during repeated casts.

With a casting weight range of 0.2–6 g, the Murrow Spin is designed for the lighter end of the lure spectrum. This makes it suitable for small jigs, micro spinners, tiny plugs and lightweight soft baits. It is a rod that rewards a delicate approach, ideal for pressured fish or clear, shallow waters where subtle presentations outperform heavy tackle.

In summary, the Pro FL Murrow Spin is a specialist ultralight tool for anglers who value sensitivity, low weight and precise lure control. It is well suited to perch and trout fishing, whether from a boat or in small rivers, and its carbon construction and EVA handle make it a practical, comfortable choice for finesse lure work.

Technical Specifications:

Brand – Pro FL
Model – Murrow Spin
Product Type – Ultralight Spinning Rod
Length – 2.08 m
Casting Weight – 0.2–6 g
Weight – 72 g
Material – Carbon Fibre
Handle – Split EVA
Target Species – Perch, Trout
Fishing Techniques – Ultralight Lure Fishing, Spinning
Suitable Waters – Small Rivers, Streams, Lakes, Boat Fishing
Key Features – Ultralight Construction, Sensitive Tip, Split EVA Handle

Pro FL Weighing Bag is a purpose-built carp sling designed for the safe retention and weighing of carp in the water. It allows anglers to keep fish secure and calm while preparing weighing and photography equipment, helping to protect the fish during the most critical moments of a session.

The bag is constructed with non-sinking floats mounted on the frame rods. These floats keep the bag buoyant and positioned at the water surface, so the fish remains fully submerged and supported rather than being lifted or pressed against the bank. This is a practical detail for carp anglers who want to minimise stress and handling time.

A full-length zip closure secures the fish inside the bag. Once zipped, the carp is safely contained and cannot escape during weighing or while being moved between the water and the mat. The zip runs along the top of the bag, giving quick and controlled access when it is time to lift the fish for weighing or release.

Mesh panels on the sides provide efficient water drainage. When the bag is lifted from the water, excess water drains away quickly through the mesh, reducing the weight of the bag and making the weighing process more accurate and manageable. The mesh also allows water to flow through the bag while it is in the water, helping to maintain oxygen exchange around the fish.

For night fishing, the bag features reflective stickers that make it easier to locate in low light. This is a useful safety and convenience feature for anglers fishing after dark or in the early hours, when visibility on the bank is limited.

A zipped pocket is included for storing small tools and accessories such as forceps, scissors, hook links or rig bits. Keeping these items close at hand means less time searching and more efficient fish care during a session.

The bag measures 105 x 55 cm and has a transport length of 105 cm. It weighs approximately 1 kg, making it easy to carry as part of a carp fishing setup. The dimensions provide ample space for typical carp while remaining practical to transport and store.

This weighing bag is suitable for carp anglers who practise catch-and-release and want a reliable, fish-friendly retention and weighing solution. It is equally useful for short sessions and longer overnight trips where safe fish handling is a priority.

Technical Specifications:

Brand – Pro FL
Model – Weighing Bag
Product Type – Carp Weighing Bag / Sling
Dimensions – 105 x 55 cm
Transport Length – 105 cm
Weight – 1 kg
Buoyancy – Non-sinking floats on frame rods
Closure – Zip
Drainage – Mesh side panels
Visibility – Reflective stickers
Pocket – Zipped pocket for small tools
Target Species – Carp
Fishing Techniques – Carp fishing, catch-and-release
Suitable For – Safe fish retention and weighing in water

Pro FL Competition Carp Feeder Quiver Tip is a replacement quiver tip designed for the FL Competition Carp Feeder rod range rated up to 130 g. Made from carbon fibre, it offers a lightweight and responsive solution for anglers who want to restore or fine-tune the bite indication of their feeder rod.

The tip is constructed from carbon fibre, a material widely chosen for rod tips because it combines low weight with good responsiveness. This helps the tip register subtle movements at the rig end, making it easier to read bites when fishing with a feeder or method feeder setup.

As a dedicated spare part for the FL Competition Carp Feeder up to 130 g rod, this quiver tip is intended to fit that specific model. Replacing a damaged or lost tip with the correct component helps maintain the original balance and behaviour of the rod.

Quiver tips are a practical accessory for feeder fishing. Having a spare tip available means you can continue fishing if a tip is broken in transit, during setup or while playing a fish. It also allows you to keep the rod ready for different conditions without needing to change the whole rod.

This tip is suitable for carp feeder fishing and general feeder work where the rod is rated up to 130 g. It is a straightforward, functional component for anglers using the compatible Pro FL Competition Carp Feeder rod.

Technical Specifications:

Brand – Pro FL
Model – Competition Carp Feeder Quiver Tip
Product Type – Feeder Rod Quiver Tip
Material – Carbon Fibre
Compatibility – FL Competition Carp Feeder Rods up to 130 g
Maximum Rod Rating – 130 g
Function – Bite Indication / Replacement Tip
Fishing Technique – Feeder Fishing
Target Species – Carp
Suitable For – Feeder and Method Feeder Angling

Pro FL Q-Shaped Swing Snap is a quick-change connector with a built-in swivel, designed for anglers who want to swap rigs, hooklinks or lures quickly and conveniently without cutting and retying. The Q-shaped swing snap combines a fast attachment point with a rotating swivel, helping to reduce line twist and allowing rapid changes on the bank.

Made for practical, efficient fishing, this connector is ideal for a wide range of rigs where speed and reliability matter. Whether you are changing hooklinks on a feeder rig, swapping lures on a spinning setup, or altering presentations during a session, the swing snap keeps the process simple and tidy.

The built-in swivel is a key feature: it allows the attached hooklink or lure to rotate freely, which can help minimise line twist and maintain a more natural presentation in the water. This is particularly useful when fishing with spinners, spoons or other rotating lures, as well as when using rigs that benefit from a free-moving connection.

The Q-shaped design provides a secure and accessible attachment point. It is easy to open and close, making it straightforward to change rigs even in cold or wet conditions. The compact shape helps keep the rig neat and reduces the chance of tangles compared with longer or more complex connector arrangements.

Supplied in a pack of 10, this connector offers excellent value and ensures you have spares on hand for multiple rigs or sessions. It is available in different sizes, allowing you to match the connector to your target species, hooklink material and fishing approach. Size 6 and size 8 are available, covering a range of light to medium fishing situations.

This quick-change connector is suitable for coarse fishing, feeder fishing, float fishing and spinning, depending on the size chosen and the rig being used. It is a versatile accessory for anglers who value efficiency and want to spend more time fishing and less time tying knots.

Technical Specifications:

Brand – Pro FL
Model – Q-Shaped Swing Snap
Product Type – Quick-Change Connector with Swivel
Quantity – 10 pieces per pack
Available Sizes – 6, 8
Swivel – Built-in
Connection Type – Q-shaped swing snap
Primary Use – Quick changing of hooklinks, rigs and lures
Suitable For – Coarse fishing, feeder fishing, float fishing, spinning

Pro FL Rolling Swivel with Hooked Snap is a versatile terminal tackle component designed for anglers who need a reliable, quick-change connection between main line and hooklink, lure or rig. Supplied in packs of 10, these swivels combine a smooth rolling swivel body with a hooked snap, allowing fast and secure attachment of traces, hooks and lures without tying and retying knots.

The swivel body is engineered to rotate freely, which helps reduce line twist during retrieve and when fish fight against the current. This is particularly useful in in-line bottom fishing rigs, where a freely rotating swivel keeps the hooklink presentation natural and reduces the risk of tangles. The rolling action also benefits spinning applications, where lures can otherwise impart twist to the main line over repeated casts.

The snap is formed from angled bent wire, a design that provides a positive, secure closure while still allowing quick lure or rig changes. The angled bend helps the snap hold its shape under load and makes it easier to open and close with cold or wet fingers. The fastening mechanism is described as strong and secure, giving confidence when targeting fish that make powerful runs or when fishing around structure.

These swivels with hooked snap are suitable for both bottom fishing in-line systems and spinning. In bottom fishing, they can be used to connect the main line to a hooklink or to attach a feeder or lead in a running rig. In spinning, they allow rapid changes of lures, spoons, spinners and soft plastics, so you can adapt to changing conditions without cutting and retying.

The product is available in three sizes: 10, 12 and 14. Size selection allows you to match the swivel and snap to your target species, line strength and lure or rig weight. Smaller sizes suit lighter line and smaller lures, while larger sizes offer more robust connection for heavier setups. Each pack contains 10 pieces.

Whether you are building in-line rigs for bottom fishing or need a dependable quick-change link for spinning, the Pro FL Rolling Swivel with Hooked Snap offers a practical combination of rotation, secure closure and easy lure or rig changes.

Technical Specifications:

Brand – Pro FL
Model – Rolling Swivel With Hooked Snap
Product Type – Swivel with hooked snap / quick link
Quantity – 10 pieces per pack
Available Sizes – 10, 12, 14
Snap Design – Angled bent wire
Closure – Strong secure fastening
Application – In-line bottom fishing rigs, spinning
Function – Quick change of hooks, lures and rigs
Rotation – Rolling swivel body to reduce line twist

Pro FL Scale is a compact, robust digital scale designed for weighing fish and a wide range of other items. Whether you want to record the weight of your catch or simply need a reliable scale for general use, this model offers a practical combination of strength, portability and clear digital readout.

The scale features a convenient hanging hook that allows you to suspend fish or objects securely during weighing. This makes it particularly useful for anglers who want to document their catch accurately, whether for personal records, catch reports or competitions.

Its comfortable, non-slip handle ensures a firm grip even when your hands are wet or cold, which is a common situation during fishing sessions. The integrated LCD screen provides clear visibility of the weight reading, while the built-in thermometer adds extra functionality by displaying the ambient temperature.

With a maximum weighing capacity of up to 50 kg, this scale is suitable for a variety of freshwater and sea fishing situations where a reliable weight measurement is required. Its compact design means it can be stored easily in a tackle box or bag without taking up much space.

Technical Specifications:

Brand – Pro FL
Model – Pro FL Scale
Product Type – Digital Fishing Scale
Maximum Weighing Capacity – 50 kg
Display – LCD Screen
Additional Function – Built-in Thermometer
Handle – Non-Slip Grip
Attachment – Hanging Hook
Construction – Compact and Robust
Suitable For – Weighing Fish and Various Objects
Application – Fishing, General Weighing

Pro FL Method Feeder Inline Set is a practical feeder kit built for Method Feeder fishing with a mould, giving anglers a ready-to-use system for presenting bait tight to the feeder. The set is designed for straightforward, efficient sessions on both commercial and wild waters.

The kit includes three Method feeders together with a mould that is used to press bait firmly onto the feeder. This helps create a compact, consistent bait package that stays in place during the cast and breaks down naturally once it reaches the lakebed.

The mould features a button on the underside that makes releasing the loaded feeder quick and easy. This small detail speeds up baiting, reduces mess and allows you to keep a steady rhythm when bites are coming regularly.

One of the key advantages of this system is the quick-change feeder design. To swap feeders you do not need to untie the whole rig. Simply remove the feeder body from the tube and slide on another body of a different weight. This makes it easy to adapt to changing conditions, depth, distance or wind without rebuilding your setup.

The feeders are supplied in three different weights, allowing you to cover a range of situations. Lighter feeders are useful for close-range work and calmer conditions, while heavier options help you hold bottom in wind, tow or when fishing further out. The inline style presents the bait directly on the feeder for a neat, tangle-resistant presentation.

This set is suitable for Method Feeder fishing on commercial fisheries and natural venues alike. It is a good choice for anglers who want a simple, adaptable feeder system for carp, bream, tench and other coarse fish, and who value fast bait changes and easy weight adjustment.

Technical Specifications:

Brand – Pro FL
Model – Method Feeder Inline Set
Product Type – Method Feeder Set
Type – Method Feeder
Feeder Weights – 40 g, 50 g, 60 g
Set Contents – 3 Method Feeders, 1 Mould
Mould Feature – Release Button on Underside
Feeder Change – Quick-Change Body on Tube
Fishing Technique – Method Feeder Fishing
Suitable Waters – Commercial and Wild Waters
Suitable For – Carp, Bream, Tench and Other Coarse Fish

Pro FL Method Feeder Ready-Tied Hooks are a practical, time-saving terminal tackle solution for anglers who fish the Method Feeder and other bottom-fishing presentations. Each hook is already tied to a 10 cm braided hooklink, so you can attach it and start fishing straight away without spending time on rig tying at the bank.

The hooks are made from strong wire, giving a reliable, durable pattern that holds its shape during repeated use. The braided hooklink offers a supple, natural presentation in the water, which is well suited to hair-rig style baits and bottom-feeding tactics.

A key feature is the bait needle mounted on the hair. This needle makes it quick and easy to thread a wide range of baits, including boilies, wafters, pellets and other popular Method Feeder offerings. Small barbs on the needle help prevent the bait from sliding off the hair, keeping your presentation secure cast after cast.

This ready-tied hook arrangement is a good choice for bottom fishing with a feeder rod, where boilies, wafters, pellets and similar baits are used. The combination of a strong wire hook, a supple braided hooklink and a secure hair-mounted needle makes it a versatile option for a variety of commercial and natural venues.

The hooks are supplied in a pack of 8 and are available in a choice of hook sizes, allowing you to match the hook to your chosen bait and the size of fish you expect to encounter.

Technical Specifications:

Brand – Pro FL
Model – Method Feeder Ready-Tied Hooks
Product Type – Ready-Tied Hooks / Hair Rigs
Hook Material – Strong Wire
Hooklink Material – Braid
Hooklink Length – 10 cm
Hooklink Diameter – 0.16 mm
Needle Length – 7 mm
Needle Feature – Barbs to Prevent Bait Slippage
Available Hook Sizes – 6, 8, 10, 12
Pack Quantity – 8 Pieces
Fishing Technique – Method Feeder, Bottom Fishing
Suitable Baits – Boilies, Wafters, Pellets and Other Baits

Pro FL Syclops 20g is a slim, heavy-bodied spinner lure built for anglers who demand accurate, long-distance casting. Its narrow profile and concentrated weight make it an excellent choice when fish are holding further out or when you need to cover water quickly and efficiently.

The curved body of the Syclops is designed to perform well in current. Once it enters the water, the spinner blade works aggressively, whether you retrieve it slowly or at speed. This makes it a versatile lure that can be adapted to different conditions and the mood of the fish on the day.

With a length of 11.5 cm and a weight of 20 g, the Syclops offers a compact yet substantial presentation. The weight helps it cut through wind and reach productive areas, while the slim shape keeps it appealing to predatory fish. It is particularly well suited to pike fishing, but will also tempt other predatory species that respond to a flashy, vibrating spinner presentation.

The Syclops is fitted with proven, fish-catching colours and a very sharp treble hook. The aggressive action of the blade, combined with the lure's ability to work in current, makes it a practical addition to a predator angler's tackle box. Whether you are casting from the bank, working along the edge of weed beds or searching open water, the Pro FL Syclops 20g is designed to deliver a reliable and attractive presentation.

Technical Specifications:

Brand – Pro FL
Model – Syclops
Product Type – Spinner Lure
Length – 11.5 cm
Weight – 20 g
Body Shape – Slim, curved
Action – Aggressive spinner blade action
Hook – Very sharp treble hook
Colours – Proven fish-catching colours
Target Species – Pike and other predatory fish
Fishing Techniques – Spinning, slow and fast retrieve
Suitable Waters – Still and flowing water

Pro FL Method Feeder 6000 is a high-quality fixed spool reel developed specifically for method feeder and bottom fishing, where reliable line lay, a smooth retrieve and dependable drag performance are essential. It combines a robust internal build with a range of practical technologies that make it a dependable choice for demanding sessions on commercial fisheries, rivers and stillwaters.

The reel is built around 6+1 stainless steel ball bearings, which support smooth rotation of the rotor and spool during both slow, controlled retrieves and faster winding. This smoothness is particularly useful when fishing method feeders, where a steady retrieve helps keep the feeder and hookbait working correctly and reduces the risk of the rig tangling or dragging.

A highly precise drag system allows fine adjustment of the fighting curve, so you can set the resistance to suit light hooklengths, larger carp or changing conditions. The drag can be tightened or slackened in small increments, giving you confidence when playing fish close to snags, platforms or marginal features.

The reel features a reinforced main shaft, which increases overall durability and efficiency under load. This is a practical benefit for anglers who fish regularly with heavier feeders or who target hard-fighting fish, as the internal components are better able to cope with repeated stress without compromising the smoothness of the retrieve.

An One Way Clutch system provides a reliable anti-reverse action, preventing the rotor from turning backwards when you strike or lift the rod. This helps maintain a solid connection with the rig and supports confident hooksets, especially when fishing at range or in windy conditions.

The Perfect Line Winding system ensures that line is laid evenly and neatly onto the spool. Consistent line lay improves casting accuracy, reduces the chance of line bedding in and helps the line peel off smoothly during the cast. For method feeder work, where repeatable accuracy is often the key to success, this is a valuable feature.

The reel is fitted with an aluminium handle and a comfortable rubberised handle grip, giving you a secure hold even when your hands are wet or cold. The handle design supports a positive winding action and is comfortable to use over long sessions.

Two metal line clips are included, allowing you to mark casting distances or store line ends neatly. A spare graphite spool is supplied in the box, so you can carry a second line strength or diameter and change over quickly without having to respool on the bank.

Overall, the Pro FL Method Feeder 6000 is a well-equipped reel for anglers who want a smooth, durable and feature-rich fixed spool reel for method feeder, feeder and bottom fishing. Its combination of stainless steel bearings, precise drag, reinforced shaft and spare graphite spool makes it a practical addition to a serious coarse fishing setup.

Technical Specifications:

Brand – Pro FL
Model – Method Feeder 6000
Product Type – Fixed Spool Reel
Ball Bearings – 6+1 Stainless Steel
Drag System – Highly Precise, Front Drag
Main Shaft – Reinforced
Anti-Reverse – One Way Clutch System
Line Lay – Perfect Line Winding System
Handle – Aluminium with Rubberised Grip
Line Clips – 2 Metal Line Clips
Spool – Supplied with Spare Graphite Spool
Fishing Techniques – Method Feeder, Feeder, Bottom Fishing
Suitable For – Coarse Fishing, Commercial Fisheries, Rivers, Stillwaters

Pro FL Distance Sticks are a two-piece aluminium distance marker set designed for carp anglers who need to cast accurately to the same spot time after time. Whether you are baiting up a feature, fishing to a clear spot or setting up a marker rod, these sticks help you record and repeat the exact distance to your chosen area.

Each stick is made from aluminium, giving a lightweight yet sturdy construction that is easy to carry as part of your carp fishing kit. The 60 cm length provides a clear visual reference above the water or bank, making it simple to line up your rod tip and maintain consistent casting distance throughout your session.

At the base of each stick is a threaded point, allowing you to screw them easily into a wide range of surfaces. This makes them suitable for use on soft banks, grass, gravel or other ground where a secure fixing is required. The threaded design means no additional tools are needed and the sticks can be positioned quickly when you arrive at the swim.

Distance sticks are a practical tool for any carp angler who wants to improve accuracy and repeatability. By marking your distance, you can ensure that every cast lands in the same area, which is particularly useful when fishing to baited spots, showing fish or features such as gravel bars and marginal shelves.

Supplied as a set of two sticks, the Pro FL Distance Sticks are a straightforward and reliable addition to your carp fishing tackle. Their simple design, durable aluminium construction and easy-to-use threaded bases make them a useful accessory for both short sessions and longer campaigns.

Technical Specifications:

Brand – Pro FL
Model – Distance Sticks
Product Type – Distance Measuring Sticks
Material – Aluminium
Length – 60 cm
Quantity – Set of 2
Base – Threaded point for easy insertion
Primary Use – Measuring casting distance
Fishing Technique – Carp fishing
Suitable For – Marking baited spots, features and clear areas

Pro FL Feeder Pro 6500 is a robust, powerful fixed spool reel from the 2024 range, designed for anglers who demand reliability and performance when targeting carp or fishing on the bottom. Its distinctive design combines a solid, hard-wearing body with a lightweight feel, making it a dependable choice for long sessions on the bank.

The reel is built from tough, rigid plastic, a material chosen for its balance of low weight and high strength. This construction helps keep the reel manageable during long casts and retrieves while resisting the knocks and scrapes that come with regular bank-side use. The result is a reel that feels solid in the hand without adding unnecessary bulk to your setup.

At the heart of the Feeder Pro 6500 is an 8+1 ball bearing system. This arrangement of bearings supports smooth, quiet operation throughout the retrieve and contributes to the long service life of the reel. Whether you are winding in a heavy feeder or slowly retrieving a bait, the bearing setup helps maintain a consistent, refined feel.

Balance is a key characteristic of this reel. It sits well on a wide range of rods and helps the whole outfit feel composed, which is particularly useful when you are casting repeatedly or holding the rod for extended periods. A well-balanced reel reduces fatigue and allows you to focus on bite indication and fish playing.

The Feeder Pro 6500 is engineered to support accurate and long casts. The line lay and spool design work together to help you place your rig precisely, whether you are fishing at range on a large pit or casting to a feature on a commercial water. This makes it a versatile option for carp fishing and bottom fishing alike.

A metal line clip is fitted to the spool. This is a practical feature for anglers who like to clip up and cast to the same distance repeatedly, helping to maintain consistent bait placement and improve bite detection. The clip is durable and designed to hold your line securely without damaging it.

In summary, the Pro FL Feeder Pro 6500 is a well-balanced, durable reel with a smooth 8+1 bearing system, a metal line clip and a design that supports accurate, long-range casting. It is a strong candidate for carp and bottom fishing setups where reliability and casting performance matter.

Technical Specifications:

Brand – Pro FL
Model – Feeder Pro 6500
Product Type – Fixed Spool Reel
Year – 2024
Material – Tough Rigid Plastic
Ball Bearings – 8+1
Line Clip – Metal
Design – Distinctive, Well Balanced
Key Features – Smooth and Quiet Operation, Long Service Life, Accurate Long Casting
Fishing Techniques – Carp Fishing, Bottom Fishing
Suitable For – Anglers Targeting Carp and Bottom-Dwelling Species

Pro FL Rubber Landing Net 95cm is a landing net designed to handle larger catches with ease, and its extended length makes it particularly convenient for boat fishing. Whether you are targeting carp, pike or other specimen fish, this net provides the reach and capacity needed to land fish safely and efficiently.

The net features a strong aluminium frame that offers a reliable balance between lightweight handling and robust construction. The frame is covered with foam padding around its circumference, which serves a practical purpose: should the net fall into the water, the foam will keep it afloat and prevent it from sinking. This is a valuable safety feature when fishing from a boat or in deep water where dropping a net could mean losing it entirely.

The mesh is made from a soft, durable rubber material that is gentle on fish and does not absorb fish odours. Unlike traditional nylon mesh, rubber netting is easier to clean and does not retain the smell of previous catches, which can be particularly beneficial when you want to keep your gear fresh. The soft texture also helps to minimise damage to the fish's protective slime layer, supporting safe catch-and-release practices.

The handle is covered with EVA material, which provides an excellent grip even with wet hands. EVA is a closed-cell foam that is commonly used in fishing tackle for its comfortable, non-slip properties, and it remains effective in wet conditions. This makes the net easier to control when landing a fish, reducing the risk of mishaps.

With dimensions of 70x60x55cm and an overall length of 95cm, this landing net offers a generous opening to accommodate larger fish while remaining manageable to handle. The 95cm length is especially useful for boat anglers who need extra reach without leaning too far over the side.

This landing net is suitable for a variety of freshwater and saltwater fishing situations where a reliable, fish-friendly net is required. Its combination of a sturdy frame, buoyant foam padding, odour-resistant rubber mesh and comfortable EVA handle makes it a practical choice for anglers who value both functionality and fish welfare.

Technical Specifications:

Brand – Pro FL
Model – FL Rubber Landing Net 95cm
Product Type – Landing Net
Frame Material – Aluminium
Mesh Material – Rubber
Handle Material – EVA
Frame Padding – Foam
Dimensions – 70 x 60 x 55 cm
Overall Length – 95 cm
Buoyancy – Foam padding keeps net afloat
Mesh Properties – Soft, durable, odour-resistant
Grip – EVA handle for wet conditions
Suitable For – Boat fishing, landing larger fish
Fish-Friendly – Gentle on fish, supports catch and release