Stands and Holders

Preston Rod Support - the Rod Support is compact and takes up little space in your bag, so it's easy to transport to every fishing trip. The angled prongs allow you to adjust the holder to the desired position. The holder can be attached to the 23, 25 or 30mm legs of a platform or chair.

Tripod for weighing carp. Made of very strong aluminium, it can withstand even very large catches. Includes a sturdy chain on which the scales hang. This tripod is very easy to fold or unfold and comes with a carrying case.
Scales and weighing bag not included.

Height - adjustable from 140 to 170cm
Transport length - 158cm
Holds up to - 40kg

A set of rubberised rod holders that snap onto the pole. Made of sturdy material. Thanks to the rubberised material, the rod sits very firmly between the bumps of the holder and stays steady.

Height - 6cm
Width between lugs - 2cm

Preston XS Feeder Arm Standart is a universal holder with 360 degrees of movement, allowing the angler to position the rod support at almost any angle. 36mm with 30mm sleeve.

A tripod for use as a support for spare fishing rods. Telescopic legs, very compact and lightweight. Can be placed on any uneven surface. The central stand is adjustable by turning the knob. Has a hook on which a heavier object can be hooked, thus increasing the stability of the stand.

Height - adjustable from 55 to 150cm

A tripod telescopic pole that is ideal for both sturgeon and night fishing. The stand is equipped with a 48W quadrilateral LED light that shines brightly into the distance and perfectly illuminates the rod ends. The stand has a holder on which the rods can be placed. There are 9 LEDs in total.

Height - 40-70cm

A tripod telescopic pole that is ideal for both sturgeon and night fishing. The stand is equipped with a 48W LED quad lamp that shines brightly into the distance and perfectly illuminates the rod ends. There are 9 LEDs in total. Below the light, between the legs of the stand, there is a hook on which a heavier object can be hooked to prevent it from being dropped on windy days.

Height - 35-60cm

Rapala SmartHub Work Station - a universal mount that attaches to the Rapala SmartHub Flat Mount or the Rapala SmartHub Track System 16 Flat Mount. This holder can hold a variety of lures, small fishing gear or perform a variety of actions such as tying hooks. There are 3 compartments, with transparent lids, which can also accommodate a variety of small tools and provide tight storage.

Dimensions - 30x16cm

Video overview ...

Rapala SmartHub Cup Holder - a cup holder that attaches to the Rapala SmartHub Flat Mount Holder or the Rapala SmartHub Track System 16 Flat Mount Holder. The Cup Holder is suitable for most beverage cans or cups.

Video overview ...

Rapala SmartHub Track System 16 - a bracket to hold SmartHub accessories. The connectors are adjustable and can be positioned anywhere on the track. The red centre point captures and holds all SmartHub accessories perfectly.

Dimensions - 42,5x6,5cm

Video overview ...

Matrix 3D-R EVA Butt Rest Extending - perfect for holding a fishing rod or a grab rod. The height of the holder is adjustable and it has a Snap-Lock quick connector that allows the top of the holder to be removed quickly and conveniently. The top of the holder is made of high-density EVA material, which protects the rod or the shaft of the grabber from damage by debris. Suitable for 25mm, 30mm and 36mm round legs.

Flagman IMP Rotating Side Quiver Rest is a modern design rod holder, suitable for a wide range of rod shafts, threaded onto the rod holders. The head of the holder is made of durable plastic and has a non-slip rubberised coating. The unique design of this holder allows rods to be positioned at any angle and the line always runs freely through the grooves. The raised edges ensure that fish cannot pull the rod out of the holder.

Length - 24cm

Flagman Rotating Side Quiver Rest - modern design rod holder, suitable for various rod shafts, threaded to the rod holders. The head of the holder is made of durable plastic and has a non-slip rubberised coating. The unique design of this holder allows rods to be positioned at any angle and the line always runs freely through the grooves. The raised edges ensure that fish cannot pull the rod out of the holder.

Length - 24cm

Flagman Armadale Telescopic Tripod is a tripod designed to be used as a support for spare fishing rods. Telescopic legs, very compact and lightweight. Can be placed on any uneven surface, the stand remains very stable. For transport, it comes with a handy transport case.

Height adjustable from 70 to 170cm

Flagman Armadale Tripod is a tripod designed to be used as a support for spare fishing rods. Telescopic legs, very compact and lightweight. Can be placed on any uneven surface, the stand remains very stable. For transport, it comes with a handy transport case.

Height adjustable from 40 to 100cm

A very sturdy rod holder that can hold 12 rods at a time. Telescopic legs allow you to change the height of the rack to adapt to uneven surfaces and for versatile use, both when fishing from the shore and when wading into the water. The holder is made of soft material so it won't damage the rods. The self-locking leg design protects the rods. Folding design, which allows for quick unfolding and folding. Has a hook, so it is possible to hang extra weight in very strong winds.

Flagman Armadale Feeder Arm Medium - ergonomic and lightweight rod holder with 2 attachment points. Attaches to 25, 30, 36mm diameter legs. Made of special aluminium alloy, it is robust, lightweight and provides stability to the fishing rod.

Length - 75cm

Flagman 90 Foam Team Rest EVA - rod holder suitable for various rod shafts, threaded to the rod holders. The head of the holder is made of EVA material, which is soft and protects fishing rods from external damage. The balls at the ends ensure that fish cannot easily pull the rod out of the holder.

Length - 34cm

A convenient, ground-mounted holder that can hold three rods at once. The threads at the top of the stand are also suitable for screwing in signallers.

Length - adjustable from 35 to 60cm
Spacing between rod holders - 25cm

Haldorado Team Feeder Competition is a modern design rod holder, suitable for a wide range of rod shafts, threaded onto the rod holders. The holder is made of durable, unbreakable TPE plastic and has a non-slip rubberised coating. The raised edges ensure that fish cannot pull the rod out of the holder. The name series of the Haldorado's multiple world champion Döme Gábor.

Length - 27cm

Video review ...

Haldorado Star Arm Rest - a corner support with a rough surface for comfortable positioning of the rod shaft or limb, threaded to the rod holders. The head of the holder is made of EVA material, which is soft and protects the rods from external damage. The balls at the ends guarantee that fish cannot easily remove the rod from the holder.

Length - 20cm

Haldorado Star Rod Rest Curved - rod holder suitable for a variety of rod shafts, threaded onto rod holders. The head of the holder is made of EVA material, which is soft and protects fishing rods from external damage. The balls at the ends ensure that fish cannot easily pull the rod out of the holder.

Length - 20cm

Haldorado Team Feeder Rod Holder is a modern design rod holder, suitable for a wide range of rod shafts, threaded onto the rod holders. The head of the holder is made of EVA material, which is soft and protects fishing rods from external damage. The raised edges ensure that fish cannot pull the rod out of the holder. The name series of the Haldorado's multiple world champion Döme Gábor.

Length - 30cm

Sturdy four-legged pole for carp/feeder fishing. The rack has three rod holders, which can also be screwed into place for signalling devices. The rod stand can be placed on a variety of surfaces as the four legs are easily adjustable. The length of the stand can be adjusted. The stand is quickly assembled and conveniently placed in its own transport bag.

Height - 56cm
Length - 81cm to 135cm
Spacing between brackets - 22cm
Number of brackets - 3

Sturdy four-legged pole for carp/feeder fishing. The rack has three rod holders, which can also be screwed into place for signalling devices. The rod rack can be placed on different surfaces thanks to the four telescopic legs, which are easily adjustable and allow the device to be placed in different positions. The legs can be fixed in different positions. The height and length of the stand can be adjusted. The stand is quickly assembled and conveniently placed in its own transport bag.

Height - 40cm to 70cm
Length - 66cm to 125cm
Spacing between brackets - 22cm
Number of brackets - 3

GURU Mini Stealth Reaper Rear Rest - sturdy rod holder with brass thread. The unique design of this holder allows rods to be positioned at any angle and the line always runs freely through the grooves. Suitable for all types of rod shafts.

Preston Keepnet Arm SH - grab bar holder with quick connector. The holder can be rotated to the desired angle. Can be attached to 23mm square, and 25mm, 30mm round legs.

Preston DLX Butt Rest Arm - perfect for placing a rod or rod rest. The height of the holder is adjustable and it has a Snap-Lock quick connector that allows the top of the holder to be removed quickly and conveniently. The top of the holder is made of high-density EVA material, which protects the rod or the shaft of the grabber from damage by debris. Suitable for 25mm, 30mm and 36mm round legs.

Haldorado Team Feeder Reaper Rod Holder is a modern design rod holder, suitable for various rod shafts, threaded to the rod holders. The head of the holder is made of durable, unbreakable TPE plastic and has a non-slip rubberised coating. It has a soft surface to protect the rod from external damage. The unique design of this holder allows the rods to be placed at any angle and the line always runs freely through the grooves. The raised edges ensure that fish cannot pull the rod out of the holder. The name series of the Haldorado's multiple world champion Döme Gábor.

Length - 20cm

Haldorado Team Feeder Tornado Rod Holder is a modern design rod holder, suitable for various rod shafts, threaded to the rod holders. The holder head is made of durable, unbreakable TPE plastic and has a non-slip rubberised coating. It has a soft surface to protect the rod from external damage. The special design of the holder ensures that the line will not get stuck. The name series of the Haldorado's multiple world champion Döme Gábor.

Dimensions - 8,5x8cm

Haldorado Team Feeder Flexi Rod Holder is a modern design rod holder, suitable for a wide range of rod shafts, threaded onto the rod holders. The head of the holder is made of durable, unbreakable TPE plastic and has a non-slip rubberised coating. It has a soft surface to protect the rod from external damage. At the touch of a button, the holder can be tilted through 180 degrees for optimal positioning of the rod on any steep bank. The name-brand gear series of Haldorado's multiple world champion Döme Gábor.

Dimensions - 7x12cm

Haldorado Team Feeder Comb is a modern design rod holder, suitable for a wide range of rods, threaded onto the rod holders. The head of the holder is made of durable, unbreakable TPE plastic and coated with a non-slip rubberised coating, which ensures that the rod will hold steady and prevent slipping, and at the moment of a fish bite, will allow you to pull the rod out and make the crossing easily. The holder has a soft surface to protect the rod from external damage. The name series of the Haldorado's multiple world champion Döme Gábor.

Dimensions - 6,5x10,5cm

Match Pro Method Rotating Side Quiver - sturdy threaded rod holder. The unique design of this holder allows the rods to be positioned at any angle and the line always runs freely through the grooves. Suitable for all types of rod shafts.

Length - 24cm

Match Pro Long Nose Rod Read Rest is a sturdy rod rest that fits all rods. This rod holder has long bumps that will hold the rod firmly and stably.

Height - 12cm
Width between bumps (feeder) - 2,5cm

Match Pro Rotating Side Quiver Rest - sturdy threaded rod holder. The unique design of this holder allows the rods to be positioned at any angle and the line always runs freely through the grooves. Suitable for all types of rod shafts.

Length - 24cm

Carp Expert - rubberised threaded rod holder that snaps onto the pole. Made of durable material. The rod sits very firmly between the bumps of the holder and stays steady.

Height - 7,5cm
Width between lugs - 4cm

The Hokkaido stand is a tall, stable tripod stand for fishing. Made of triple-layer aluminium tubes. Conveniently and quickly assembles and disassembles. Ideal for fishing where the stand needs to be taken into the water. There are four places for fishing rods. Adjustable height, length and angle of tilt. Includes a hook for attaching additional weight. Folds flat and fits into a convenient transport bag. A useful tool for carp or feeder fishing.

Length - 80cm to 125cm
Height - 75cm to 130cm
Spacing between holders - 20cm
Number of holders - 4

Preston XS Feeder Arm Standart - telescopic, stable and sturdy two-point feeder arm. Easily adjustable lift angle and length. Suitable for 23, 25, 30 and 36mm platform or chair legs.

Length - 70-120cm

Carp Expert - rubberised threaded rod holder that snaps onto the pole. Made of sturdy plasmases. The rod sits very firmly between the bumps of the holder and holds steady.

Height - 6cm
Width between lugs - 2cm

Carp Expert IMP Comb Rod Rest is a modern design rod holder, suitable for various rods, threaded to the rod holders. The soft material (flexible, rubber-like) will hold the rod steady and prevent it from slipping, and at the moment of a fish strike, it will allow you to pull the rod out and make the crossing easily.

The name tool series of Döme Gábor, multiple world champion in Haldorado. The tripod telescopic stand, with adjustable legs, makes it easy to position on uneven ground. The legs are made of aluminium and the joints are covered with plastic caps, which allow you to adjust the height in one easy movement and set it upright on uneven ground. The top is threaded for screwing in an alarm device or various rod holders.

Height from 52 to 126cm

Carp Expert Rubberised Rod Rest - threaded rubber rod holders that snap onto the pole. Made of strong and flexible rubber. The rod sits very firmly between the bumps of the rod holder and stays steady. The rubber surface of the holder protects the rod from scratches.

Quantity - 2 pcs.
Height - 3cm
Width between lugs - 1cm

Carp Expert Butt Grip Soft is a threaded plastic rod holder that snaps onto various rod holders. Made of soft and sturdy plastic. The rod sits very firmly between the bumps of the holder and holds steady.

Height - 3cm
Width between lugs - 1,5cm

Kamasaki Rod Rest Head is a plastic rod holder with a thread that snaps onto the pole. Made of sturdy plastic. The rod sits very firmly between the bumps of the holder and stays steady.

Height - 4cm
Width between lugs - 2cm

Carp Expert Top Line Rod Rest is a plastic rod holder with a threaded thread that snaps onto the pole. Made of soft and sturdy plastic. The rod sits very firmly between the bumps of the rod holder and stays steady.

Height - 4cm
Width between lugs - 2cm

Carp Expert Butt Grip Heavy Duty - plastic threaded rod holder that snaps onto the butt. Made of heavy-duty plastic. The rod is very comfortable to hold and stable.

Height - 3cm
Width between bumps - 2,5cm

Carp Expert Rod Rest is a plastic rod holder with a threaded thread that snaps onto the pole. The rod is very comfortable to hold and stable.

Height - 4cm
Width between bumps - 4cm

Threaded rod holder post. Telescopic stand made of aluminium alloy with a screw at the feeder for easy and quick positioning. The thread is standard, so you can screw in a beacon or other holder. High quality and strong locking. Often used in carp fishing as a buzz bar holder.

Available in different lengths:
60-105cm
80-145cm

Threaded rod holder. Telescopic stand made of aluminium alloy with a screw at the bottom for easy and quick positioning. The thread is standard, so you can screw in a beacon or other holder.

Different lengths are available.

A tripod telescopic pole that is ideal for both sturgeon and night fishing. The stand is equipped with a 27W quadrilateral LED light that shines brightly into the distance and perfectly illuminates the rod ends. Even fishing rods can be placed on the stand.

Height - 35-60cm

A tripod telescopic pole that is ideal for both sturgeon and night fishing. The stand is equipped with a 48W quadrilateral LED light that shines brightly into the distance and perfectly illuminates the rod ends. Even fishing rods can be placed on the stand. 9 LEDs in total. Below the lantern, between the legs of the stand, there is a hook on which a heavier object can be hooked to prevent it from being dropped on windy days.

Height - 50-110cm

Preston XS Feeder Arm Long - telescopic, stable and sturdy two-point feeder arm. Easily adjustable lift angle and length. Suitable for 23, 25, 30 and 36mm platform or chair legs.

Length - 105-185cm

Preston Offbox 36 Ripple Bar Double Long is a holder that is universally suitable for both fishing rods and other fishing gear. The holder is tightly screwed on, so your gear will stay stable and secure. It has two threads on which other holders or accessories can be attached. The holder is soft, so your tools will be protected from external damage. Suitable for 23, 25 and 30mm legs.

Length - 30cm

Preston Triple Rod Support - a holder that is ideal for holding 3 rods at once. The holder is compact and takes up little space in your bag, so it will be convenient to transport to every fishing trip. The angled prongs allow you to adjust the holder to the desired position. The holder can be attached to the 23, 25 or 30mm legs of a platform or chair.

Preston Competition Pro Roost Standard - a great, very sturdy rod holder. This four-legged holder, with extended legs, is ideal for all types of rods. Thanks to the extendable legs, the holder can be used universally, whether fishing from the shore or wading into the water. The holder is made of soft material and will not damage the rod. The self-locking leg design protects the rods.

Rapala SmartHub Flat Mount - the perfect, versatile mount for endless possibilities to change and customise. The ultra-versatile mount easily attaches to any flat surface and holds accessories securely. It can also be connected to the SmartHub Track system, sold separately.

Rapala SmartHub Rod Storage is a holder for storing winter fishing rods. The adjustable holder can be rotated and locked in position using the adjustment screw. The holder attaches to the flat SmartHub universal holder included in the kit or to the Smarthub® Track System 16, sold separately.

Length - 23,5cm

Rapala SmartHub Rod Storage is a holder for storing winter fishing rods. The holder attaches to the flat SmartHub universal holder or the Smarthub® Track System 16, sold separately. The set includes 2 pcs.

Length - 12,5cm

Atora Rod Holder - a holder for convenient storage of spare rods. It is also convenient to place the rod comfortably during casting. Adjustable angle. Suitable for 25, 30 and 36mm legs.

Length - 30cm

Rod rack Hokkaido is a stable four-legged rack for carp/feeder fishing. The rack has three rod holders into which the beacons can be screwed. Two legs are higher than the other two, the legs of the stand can also be adjusted to the desired positions, closer to the centre or lowered to the edges, which ensures its stability. The length of each telescopic leg can be adjusted individually and one leg is higher than the other. The legs can be fixed in different positions. The height, length and angle of inclination of the stand can be adjusted.
The stand is quickly assembled and conveniently placed in its own transport bag. Compact, comfortable and sturdy fishing rod rack.

The adjustability of this stand is:
Height - 75cm to 130cm
Length - 100cm to 150cm
Spacing -30cm
Number of brackets- 3

FL Buzz Bar is a two rod holder suitable for carp or feeder fishing. The holder can be widened to fit the size of the reels. Can be attached to a pole or tripod stand. The holder has a quick-connect magnet, which eliminates the need to unscrew beacons or rod holders every time. A very handy item for carp or feeder fishing when you don't want to carry a lot of stuff. Also when fishing in narrow gaps in grass or bushes.

Length of holder - 17cm/22cm
Spacing between holders - 13,5cm/18cm

Two rod holder with pole. The holder can be expanded to fit the size of the reels. The length of the pole is adjustable from 31cm to 49cm so you can choose the desired height, and the length of the holder is adjustable from 17cm to 22cm. It is a very handy item for carp or feeder fishing, when you don't want to carry a lot of stuff. Also when fishing in narrow gaps in grass or bushes. The sturdy construction will prevent snagging, even with record catches.

Length of holder - 17cm/22cm
Spacing between holders - 13,5cm/18cm
Length of bench - 31cm/49cm

Threaded rod holder that swivels on the pole.
The angle of the holder can be adjusted. The rod rests comfortably and firmly on the silicone tube and rests exactly in the middle of the recess.

Width of holder - 28cm
Colour - green

Preston Deluxe Dutch Feeder Rest Short - metal threaded feeder rod holder. The material is soft and gentle and will protect your rods from external damage.

Length - 61,5cm

Preston Pole Grip - modern design rod holder, suitable for various rod shafts, threaded onto rod holders. The soft, durable plastic material will hold the pole steady and prevent slipping, and at the moment of a fish bite, it will allow you to pull the pole out easily and make the crossing.

Length - 6cm
Width between bumps - 4.5cm

Rod and reel stand. Telescopic stand made of aluminium alloy with a solid thread at the feeder.

Length - 85cm
Length when unfolded - 140cm

Plastic rod holders for threaded attachment to various rod holders. The holders open and close with a magnet. The rod will be held firmly and securely in place when the rod is inserted. The package contains 4 pcs.

Stable four-legged pole for carp/feeder fishing. The rack has four rod holders into which the beacons can be screwed. The legs of the stand are located at different ends, which ensures its stability. The length of each telescopic leg can be adjusted separately. The rack is made of three layers of large aluminium tubes. The legs can be fixed in different positions. The height, length and angle of inclination of the stand can be adjusted. The stand is quickly assembled and conveniently placed in its own transport bag. Compact, comfortable and sturdy rod rack.

Height - 40 to 70cm
Length - 75 to 130cm
Spacing between brackets - 25cm
Number of brackets - 4

Preston Rod Support - for convenient storage of a spare rod. It also allows the rod to be conveniently inserted during casting. The set includes a total of 3 grommets: one for square (23mm) and two for round legs (25mm and 30mm).

Length - 21cm

Preston Offbox 36 Up & Over Pole Rest is the perfect holder for both rod and reel. The holder is rubberised so the rods and shafts won't get damaged. The set comes with a total of 3 grommets: one for the square leg (23mm) and two for the round leg (25mm and 30mm).

Length - 18cm

Threaded rod holder that engages on a ball. The angle of inclination of the holder can be adjusted. The rod rests comfortably and firmly on the silicone tube.

Length - 18cm

Savage Gear MP Rod Holder is a strong rod holder made of high quality aluminium. The perfect choice for anglers who like to troll, fish with live bait or have a comfortable rod holder. Can be mounted on the side of the boat and the angle of the holder is adjustable.

The Hokkaido stand is a tall, stable tripod stand for fishing. Made of triple-layer aluminium tubes. Conveniently and quickly assembles and disassembles. Ideal for fishing where the stand needs to be taken into the water. There are four places for fishing rods. Adjustable height, length and angle of tilt. Includes a hook for attaching additional weight. Folds flat and fits into a convenient transport bag. A useful tool for carp or feeder fishing.

Length - 80cm to 125cm
Height - 75cm to 130cm
Spacing between holders - 20cm
Number of holders - 4

The Hokkaido is a sturdy, stable, four-legged fishing pole. Made of metal, no plastic connection points. All tighteners and adjusters are also metal. The rod is designed for fishing with three rods. The height, length and tilt angle of the stand can be adjusted. Folds flat and fits into a transport bag. A handy tool for carp or feeder fishing.

Length - 80cm to 125cm
Height - 35cm to 65cm
Spacing between holders - 30cm
Number of holders - 3

A tripod, stable and sturdy stand for feeder or carp fishing. All screws and fastenings are metal. The length and height of the rack can be adjusted. The angle of inclination is also adjustable. The metal telescopic legs of the rack are separately adjustable. The rack has three places for screwing in rod holders or beacons. Spacing between rod holders 20cm. The rod rack conveniently and quickly folds up into a transport bag. The legs do not need to be unscrewed from the structure when folding the stand. The sturdy, metal stand is ideal for fishing from the shore and from the dock.

Length - 70cm to 110cm
Height - 50cm to 85cm
Spacing between brackets - 20cm
Number of brackets - 3