Accessories for platforms, chairs

A wide range of accessories for chairs and platforms. Tables, footstools, feeder arms, holders, bowls and other tools needed for feeder fishing. Products of the most well-known manufacturers: Matrix, Preston, Guru, Feeder Competinion, Carp Zoom and others.

Rasta 112 prekės(-ių), žiūrėti žemiau

Showing 1-20 of 112 item(s)

Active filters

  • Fishing rod holders FL

    €4.70

    A set of rubberised rod holders that snap onto the pole. Made of sturdy material. Thanks to the rubberised material, the rod sits very firmly between the bumps of the holder and stays steady.

    Height - 6cm
    Width between lugs - 2cm

    Quick view
  • Table with awning Atora

    €84.80

    Side table for chair or platform. Attaches at one point to the leg. Has a telescopic support leg with adjustable length from 50 to 80cm. Suitable for all chairs and platforms with 25, 30 or 36mm legs. It has a retractable, removable canopy to protect against wind, rain or sun. The table is reinforced on the underside, but its weight is not significant as it is made of lightweight materials.

    Dimensions - 55x40cm

    Quick view
  • Fishing rod holder Preston Space Saver 360

    €41.99

    Preston XS Feeder Arm Standart is a universal holder with 360 degrees of movement, allowing the angler to position the rod support at almost any angle. 36mm with 30mm sleeve.

    Quick view
  • Holder Rapala SmartHub Work Station

    €21.95

    Rapala SmartHub Work Station - a universal mount that attaches to the Rapala SmartHub Flat Mount or the Rapala SmartHub Track System 16 Flat Mount. This holder can hold a variety of lures, small fishing gear or perform a variety of actions such as tying hooks. There are 3 compartments, with transparent lids, which can also accommodate a variety of small tools and provide tight storage.

    Dimensions - 30x16cm

    Video overview ...

    Quick view
  • Cup Holder Rapala SmartHub Cup Holder

    €6.95

    Rapala SmartHub Cup Holder - a cup holder that attaches to the Rapala SmartHub Flat Mount Holder or the Rapala SmartHub Track System 16 Flat Mount Holder. The Cup Holder is suitable for most beverage cans or cups.

    Video overview ...

    Quick view
  • Holder Rapala SmartHub Track System 16

    €20.95

    Rapala SmartHub Track System 16 - a bracket to hold SmartHub accessories. The connectors are adjustable and can be positioned anywhere on the track. The red centre point captures and holds all SmartHub accessories perfectly.

    Dimensions - 42,5x6,5cm

    Video overview ...

    Quick view
  • Holder Matrix 3D-R EVA Butt Rest Extending

    €28.99

    Matrix 3D-R EVA Butt Rest Extending - perfect for holding a fishing rod or a grab rod. The height of the holder is adjustable and it has a Snap-Lock quick connector that allows the top of the holder to be removed quickly and conveniently. The top of the holder is made of high-density EVA material, which protects the rod or the shaft of the grabber from damage by debris. Suitable for 25mm, 30mm and 36mm round legs.

    Quick view
  • Rod holder Flagman Armadale Feeder Arm Medium

    €72.40

    Flagman Armadale Feeder Arm Medium - ergonomic and lightweight rod holder with 2 attachment points. Attaches to 25, 30, 36mm diameter legs. Made of special aluminium alloy, it is robust, lightweight and provides stability to the fishing rod.

    Length - 75cm

    Quick view
  • Fishing rod holder Flagman 90 Foam Team Rest EVA

    €9.60

    Flagman 90 Foam Team Rest EVA - rod holder suitable for various rod shafts, threaded to the rod holders. The head of the holder is made of EVA material, which is soft and protects fishing rods from external damage. The balls at the ends ensure that fish cannot easily pull the rod out of the holder.

    Length - 34cm

    Quick view
  • Table Flagman Match Competition

    €28.00

    Flagman Match Competition - a robust, plastic Flagman table with a metal frame. Designed to be attached to a platform or chair with 25, 30, 36mm diameter legs. Allows you to stack additional accessories. Raised sides of the table protect tools from falls.

    Dimensions - 42x38cm

    Quick view
  • Table Preston Side Tray L

    €32.98

    Preston Side Tray - an extremely sturdy, comfortable side table. The table attaches to 23 and 30mm legs. The table has plenty of space to store bait boxes, EVA bowls. Thanks to the durable construction and the raised sides of the table, tools are protected from falls.

    Dimensions - 33x44cm

    Quick view
  • Leg for platform Atora 36mm

    €22.40

    Telescopic leg for chair or platform. the 36mm diameter leg extends from 75 to 100cm. Features a sturdy, plastic, adjustable sole and quality and reliable fasteners.

    Sold in sets of 1.

    Quick view
  • Replacement screw for chair or pack Atora

    €3.40

    The Atoram spare screw is for a chair or pack.

    Quick view
  • Atora chair and platform mattress

    €3.40

    A spirit level for attaching to a platform or chair to allow the chair or platform to be placed in a straight position on an uneven surface The spirit level can be attached by gluing or riveting, with holes for this.

    Quick view
  • Marquee table Preston Venta-Lite Hoodie Side Tray XL

    €149.99

    Preston Venta-Lite Hoodie Side Tray - table with awning. The table is large enough to hold a large amount of baits and protect them from rain or sunlight with the hood. There is a ruler at the front of the table. The special table clamps attached to the legs of the platform are strong enough to withstand larger quantities of lures. The hood is secured by two handwheels on the sides of the table.

    Dimensions -27x79x61cm

    Quick view
  • Platform Preston Absolute Station Graphite

    €999.99

    Preston Absolute Station Graphite is a comfortable, height-adjustable platform made of high-quality materials. For many years, Absolute has been a masterpiece of high-end platform design and engineering, incorporating cutting-edge features and a completely new elegant design. The main frame of the seat box is made of lightweight aluminium using hydroforming technology, which makes it lightweight and extremely robust. It has 6 telescopic legs with a diameter of 30mm. The platform, under the seat, has drawers for storing various fishing tools. The platform is equipped with Mag-Lok clips which ensure that the magazines are securely locked during transport. Removable or collapsible, adjustable footrest, non-slip surface. Built-in spirit levels for smooth platform positioning. Flexible footrests adapt perfectly to any surface. Wide platform foot pads prevent sinking into the ground. The platform has a padded shoulder strap for easy removal. It has a padded shoulder strap for easy transport.

    Weight - 17kg

    Video overview ...

    Quick view
  • Table Team Feeder By Döme Side Tray Medium

    €34.40

    Haldorado Team Feeder Side Tray Medium is a heavy-duty, comfortable side table. The table attaches to 36mm, 30mm and 25mm legs. The table has plenty of space to store bait boxes, EVA bowls. The sides of the table are raised to protect tools from falls. The name series of tools by Haldorado's multiple world champion Döme Gábor.

    Dimensions - 42x38x2cm

    Quick view
  • Table Preston Super Side Tray

    €35.99

    Preston Super Side Tray - an extremely sturdy, comfortable side table. The table attaches to 23, 25 and 30mm legs. The table has plenty of space to store bait boxes, EVA bowls. The sides of the table are raised to protect tools from falls.

    Dimensions - 43x39cm

    Quick view
  • Holder Preston Keepnet Arm SH

    €17.99

    Preston Keepnet Arm SH - grab bar holder with quick connector. The holder can be rotated to the desired angle. Can be attached to 23mm square, and 25mm, 30mm round legs.

    Quick view
  • Holder Preston DLX Butt Rest Arm

    €27.99

    Preston DLX Butt Rest Arm - perfect for placing a rod or rod rest. The height of the holder is adjustable and it has a Snap-Lock quick connector that allows the top of the holder to be removed quickly and conveniently. The top of the holder is made of high-density EVA material, which protects the rod or the shaft of the grabber from damage by debris. Suitable for 25mm, 30mm and 36mm round legs.

    Quick view