Feeder Rods

Pro FL Black Panther Feeder is a dedicated bottom fishing rod built for anglers who need to fish with heavier leads and hold bottom in demanding conditions. Designed with river fishing in mind, it combines a carbon fibre blank with a set of three glass fibre quiver tips of differing sensitivity and stiffness, giving you the flexibility to adapt the rod to the swim in front of you.

The blank is constructed from carbon fibre, a material chosen for its combination of low weight and strength. This helps keep the rod manageable during long sessions and gives it the backbone needed to cast and control heavier feeder rigs. The rod is supplied with three glass fibre tips, each offering a different level of sensitivity and stiffness so you can fine-tune bite indication to the conditions.

Tip selection has a direct effect on how the rod behaves. Fitting the red tip makes the rod stiffer and less sensitive, which is a practical advantage when fishing in a strong current where a softer tip would be constantly pulled over by the flow. The green and yellow tips make the rod more sensitive, helping you register more delicate indications when the current is gentler or the fish are feeding cautiously.

With a casting weight of 50 to 150 g, the Black Panther Feeder is well suited to fishing heavy leads. This range covers situations where substantial weight is required to keep the bait and feeder where you want them, and it also allows you to cast the rig a long distance when the swim demands it. The rod is therefore a sensible choice for large rivers and other venues where flow and distance are key factors.

The comfortable handle provides a secure grip, which matters when you are holding the rod for long periods or applying pressure to a hooked fish. A firm hold makes it easier to control the fight and to keep the rod steady while waiting for bites.

The Pro FL Black Panther Feeder is available in two lengths, 3.60 m and 3.90 m, so you can choose the version that best matches your preferred swims and casting requirements.

Technical Specifications:

Brand – Pro FL
Model – Black Panther Feeder
Product Type – Feeder Rod / Bottom Fishing Rod
Blank Material – Carbon Fibre
Tip Material – Glass Fibre
Supplied Tips – 3 Tips (Red, Green, Yellow)
Tip Characteristics – Red Tip Stiffer and Less Sensitive; Green and Yellow Tips More Sensitive
Casting Weight – 50–150 g
Available Lengths – 3.60 m, 3.90 m
Handle – Comfortable Grip
Fishing Technique – Feeder / Bottom Fishing
Suitable Waters – Rivers and Stillwaters
Suitable For – Fishing Heavy Leads in Strong Current and at Distance

FL Competition Carp Feeder is a versatile rod with two different limbs. With one limb on, the rod becomes a great carp rod, while the interchangeable tip limb allows the rod to be used as a feeder feeder. The rod benefits from extra wide and robust carp rings. The width of the rings is much wider than normal, both at the start and at the tip of the rod. A great option if you don't want to spend extra money on separate rods for carp fishing and feeder feeder fishing.

FL Sakana Hantay Ultra Feeder is a dedicated bottom fishing rod built for targeting fish in stillwater venues and in flowing rivers alike. It is a versatile feeder rod designed for anglers who want one reliable tool for both close-range and long-distance work, whether fishing a commercial lake, a gravel pit or a steady river swim.

The blank is made from high-quality carbon fibre, which keeps the rod light in the hand while giving it the backbone needed to cast loaded feeders accurately. The carbon construction also helps transmit information from the lakebed back to the handle, so bites and the movement of a hooked fish are felt clearly rather than muted.

The rod is rated for casting weights from 60 g to 120 g. This broad casting range means it can handle light feeders for wary fish in clear, shallow water as well as heavier loaded feeders when you need to hold bottom in a current or reach a distant feature. Being able to cast both light and heavy feeders to a chosen spot gives you real flexibility when the swim dictates the approach.

A key feature of this feeder rod is its set of three interchangeable quiver tips of differing sensitivity and flexibility. Swapping tips lets you tune the rod to the conditions and the presentation. With the yellow-green tip fitted, the rod becomes stiffer and less sensitive, which is useful when fishing in a strong current where a soft tip would be constantly dragged round by the flow. With the green or red tip fitted, the rod becomes softer and considerably more sensitive, making even the most delicate bites easier to spot.

At just 270 g, the rod is relatively light for its class. That low weight reduces fatigue during long sessions and helps the rod transfer the thump of a bite and the pull of a fighting fish cleanly through the blank, turning the playing of a good fish into a genuinely enjoyable experience.

The large rod guides make fishing easier in practice. Their generous internal diameter allows knots and leader connections to pass through smoothly and helps prevent tangles and snags catching on the rings, which is particularly welcome when using shock leaders or heavier rigs.

This bottom fishing rod is available in 3.30 m, 3.60 m and 3.90 m lengths, so you can choose the version that best suits your style of fishing. If you regularly fish at longer distances, the longer rod gives you extra reach and better line control at range. If you fish closer in, or if your casting position is cramped and awkward, the shorter rod is easier to handle and more comfortable to use.

The cork handle sits comfortably in the hand and offers a secure, warm grip in all weathers. Combined with its light weight and adaptable tip system, this rod suits both the beginner looking for a dependable first feeder rod and the experienced angler wanting a versatile addition to the holdall.

Technical Specifications:

Brand – Pro FL
Model – Sakana Hantay Ultra Feeder
Product Type – Feeder Rod / Bottom Fishing Rod
Blank Material – High-Quality Carbon Fibre
Lengths Available – 3.30 m, 3.60 m, 3.90 m
Casting Weight – 60-120 g
Rod Weight – 270 g
Quiver Tips – 3 Interchangeable Tips (Yellow-Green, Green, Red)
Tip Function – Yellow-Green Tip Stiffer and Less Sensitive; Green and Red Tips Softer and More Sensitive
Guides – Large-Diameter Rod Guides
Handle – Cork
Fishing Techniques – Feeder Fishing, Bottom Fishing
Suitable Waters – Stillwater and Flowing Rivers
Suitable For – Beginners and Experienced Anglers

The Pro FL Sphere Feeder is a high-quality feeder rod designed for anglers who value sensitivity, reliability and casting accuracy. This model is ideal for method feeder fishing on smaller venues where precise casting at short and medium distances is essential.

The blank is made from high modulus carbon and additionally reinforced with a special carbon weave, giving the rod exceptional strength, durability and low overall weight. Its highly responsive blank clearly transmits bottom structure, rig movement and even the most delicate bites directly to the angler.

The fast action combined with a progressive playing curve allows accurate casting while effectively absorbing powerful lunges during the fight. This makes playing larger fish smooth, controlled and reliable.

The rod comes supplied with three interchangeable quiver tips rated at 1.5 oz, 2 oz and 3 oz, allowing anglers to easily adapt to different fishing conditions and bite activity. A high-quality Fuji top-lock reel seat ensures secure reel fixation even during intensive use. The ergonomic EVA and natural cork handle provides excellent comfort during long fishing sessions.

The Pro FL Sphere Feeder is an excellent choice for modern feeder anglers looking for sensitivity, precision and comfort.

Key Features:

Product: Feeder rod
Brand: Pro FL
Model: Sphere Feeder
Length: 3.30 m
Casting Weight: Up to 80 g
Blank: High modulus carbon
Reinforcement: Special carbon weave
Action: Fast with progressive curve
Application: Method feeder fishing
Quiver Tips: 1.5 oz / 2 oz / 3 oz
Reel Seat: Fuji top-lock
Handle: EVA and natural cork
Feature: Sensitive and accurate
Suitable For: Small and medium-sized venues
Special Feature: Excellent casting and fish-playing performance

Shimano Aero X1A Big River Feeder 4.27m 200g is a powerful feeder rod designed for heavy-duty fishing in large rivers and long-distance casting.

Built on a full carbon blank, it offers a great balance of strength, sensitivity and weight. Even with its heavy casting rating, the rod still provides excellent bite detection.

The Diaflash technology in the lower section adds extra strength and stability, allowing accurate casting with heavy feeders and confident control over bigger fish.

Supplied with interchangeable tips, the rod can be adapted to different fishing conditions and flow levels. Shimano Hardlite guides ensure smooth line flow and durability.

The EVA full grip handle provides comfort and control during long sessions.

An excellent choice for anglers targeting big fish in rivers and fishing at long range.

Brand: Shimano
Model: Aero X1A Big River Feeder
Length: 4.27m
Casting Weight: up to 200g
Sections: 3
Transport Length: approx. 150cm
Weight: approx. 244g
Blank: Full carbon + Diaflash
Tips: 5oz + 6oz
Guides: Shimano Hardlite
Handle: EVA full grip
Features: powerful, sensitive, long casting, durable
Suitable For: river fishing, feeder fishing, long-distance fishing

The Shimano Aero X1A River Feeder is a reliable and affordable feeder rod designed for river fishing with heavy feeders. It performs exceptionally well in strong currents and larger venues where power, stability and control are essential.

Built on a full carbon blank, the rod offers a lightweight and well-balanced feel while maintaining impressive strength. With a casting rating of up to 180g, it handles large feeders confidently and provides solid control when playing bigger fish.

Fitted with Shimano Hardlite guides with stainless steel frames for smooth line flow and long-term durability. The VSS-style reel seat and full EVA handle ensure a comfortable and secure grip during long fishing sessions.

Supplied with two interchangeable quiver tips, allowing easy adjustment to current speed and bite sensitivity.

Specifications:

• Length: 13ft (3.96 m)

• Sections: 3

• Rod type: River Feeder

• Casting weight: up to 180 g

• Quiver tips: 4 oz / 5 oz

• Weight: 187 g

• Transport length: 140 cm

• Reel seat: VSS style

• Handle: full EVA

• Guides: Shimano Hardlite, stainless steel frames

This original spare feeder tip set is designed specifically for the FL Sakana Hantay Ultra Feeder 3.90 m 60–120 g, ensuring a perfect fit and maintaining the rod's original performance.

The set includes three 3 mm feeder tips consisting of two fibreglass tips and one carbon fibre tip, allowing anglers to adapt the rod to different fishing conditions, water flow and bite sensitivity.

Manufactured from high-quality materials, these replacement tips provide excellent sensitivity, reliable bite detection and long-lasting durability. Ideal as spare tips or for switching between different tip actions.

Key Features:

Product: Spare Feeder Tip Set
Brand: FL Sakana
Model: Hantay Ultra Feeder
Compatible With: FL Sakana Hantay Ultra Feeder 3.90 m 60–120 g
Quantity: 3 Feeder Tips
Material: 2 × Fibreglass, 1 × Carbon Fibre
Diameter: 3 mm
Feature: Original Replacement Set with Perfect Fit

Guru A-Class Distance Method Feeder Rod – 3.66m, 1–80g
The Guru A-Class Method Feeder is a premium two-piece feeder rod designed for long-distance and bottom fishing. Its 24T tensile carbon fibre blank provides progressive power, excellent flexibility under load, and precise transmission of even the slightest bites.

The rod features stainless steel frame guides with titanium oxide ceramic inserts, ensuring durability and smooth line flow. Equipped with a downlocking DPS reel seat and a half-cork, half-EVA handle, the rod provides excellent grip, balance, and comfort during long fishing sessions.

Includes two carbon quiver tips for adapting to different bait weights and fishing conditions.

Specifications:

• Length: 3.66m

• Casting Weight: 1–80g

• Blank Material: 24T tensile carbon fibre

• Guides: Stainless steel frame with titanium oxide ceramic

• Handle: Half cork, half EVA with rear EVA grip support

• Reel Seat: Downlocking DPS

• Quiver Tips Included: 1.5oz and 2oz

Key Features:

• Ideal for long-distance casting and precise feeder fishing

• Sensitive blank transmits every bite

• Comfortable handle for extended fishing sessions

• Durable high-quality guides prevent line wear

• Two interchangeable quiver tips for versatility

A reliable and high-performance feeder rod, perfect for anglers who demand distance, sensitivity, and accuracy in every cast.

Guru A-Class Method Feeder Rod 3.35m 1–50g
The Guru A-Class Method Feeder is a premium two-piece bottom fishing rod, perfect for medium casts in medium-sized lakes or rivers. Built for anglers seeking precision, sensitivity, and balance in Method Feeder fishing.

Constructed from 24T tensile carbon fibre, the blank delivers progressive power and flexibility under load, ensuring smooth handling of fish strikes. Equipped with stainless steel guides with titanium oxide ceramic inserts, it provides durability and smooth line flow.

The rod features a DPS-type downlocking reel seat, a semi-cork, semi-EVA handle, and an EVA rear grip section for comfort, balance, and secure handling during long sessions. Two carbon quiver tips (1oz and 1.5oz) are included to adapt to different fishing situations.

Specifications:

• Length: 3.35m

• Casting Weight: 1–50g

• Rod Type: Method Feeder, Bottom Fishing

• Blank Material: 24T tensile carbon fibre

• Tips: 2 carbon quiver tips (1oz & 1.5oz)

• Guides: Stainless steel frame with titanium oxide ceramic

• Handle: Semi-cork & semi-EVA, plus rear EVA grip

• Reel Seat: DPS-type downlocking

Ideal for anglers targeting carp and other medium-sized species with Method Feeder rigs, providing sensitivity, precision, and comfort in every cast.

Guru A-Class Mini Method Feeder Rod 2.74m 1–30g
The Guru A-Class Mini Method Feeder is a premium two-piece bottom fishing rod, ideal for short casts in smaller lakes and ponds. Designed for precision, comfort, and sensitivity, it is perfect for anglers fishing with Method Feeder rigs in confined spaces.

Constructed from 24T tensile carbon fibre, the blank provides progressive power and flexibility under load, ensuring smooth handling of fish strikes. The rod features stainless steel guides with titanium oxide ceramic inserts for durability and smooth line flow.

It comes with a DPS-type downlocking reel seat, a semi-cork, semi-EVA handle, and a rear EVA grip for excellent balance, comfort, and secure handling during long fishing sessions. Two carbon quiver tips (0.75oz and 1oz) are included for adjusting sensitivity to different situations.

Specifications:

• Length: 2.74m

• Casting Weight: 1–30g

• Rod Type: Mini Method Feeder, Bottom Fishing

• Blank Material: 24T tensile carbon fibre

• Tips: 2 carbon quiver tips (0.75oz & 1oz)

• Guides: Stainless steel frame with titanium oxide ceramic

• Handle: Semi-cork & semi-EVA, plus rear EVA grip

• Reel Seat: DPS-type downlocking

Perfect for targeting carp and other small to medium species, offering sensitive bite detection, precise casting, and comfortable handling in smaller fishing venues.

Spare FL Strategist River 3.90m 100-200g third rod part.

Spare FL Strategist Distance 4.20m 80-150g third part.

Spare FL Strategist Distance 3.90m 80-150g third part.

Pro FL Team Feeder 3.90m 60-180g is a reliable, versatile and robust feeder rod that performs equally well on still waters and in rivers with a stronger current. It has been developed for anglers who want one rod that can cover a wide range of feeder fishing situations without compromising on sensitivity or power.

The blank is built from quality carbon fibre, which delivers an excellent balance between sensitivity and strength. This combination means that even the most cautious bites are transmitted clearly through the rod, while the stronger blank works in a stable and controlled manner when heavier feeders are used. The result is a rod that feels responsive in the hand yet retains enough backbone to cope with demanding conditions.

Supplied with three quiver tips of different sensitivity ratings, the rod can be quickly adapted to changing swims, flow rates and target species. The softer tips are ideal for still waters and delicate bites, where a fine indication is essential. The stiffer tips are better suited to river fishing, where greater control and resistance to the current are required. This flexibility makes the Team Feeder a practical choice for anglers who fish a variety of venues.

All quiver tips are fitted with K-type guides. These help to protect the line during the cast and ensure smooth, even line flow through the guides. Reduced friction supports cleaner casting and can contribute to better distance, particularly when fishing at range.

The rod features a cork handle that provides a stable and comfortable grip, even during long sessions. Larger rod guides further reduce friction and help to improve casting performance. The lightweight construction keeps the rod comfortable to hold and fish with over extended periods, reducing fatigue when you are repeatedly casting and retrieving.

With a casting weight range of 60-180g and a length of 3.90m, the Pro FL Team Feeder is well suited to a broad spectrum of feeder tactics. It is a strong option for anglers who value sensitivity, accuracy and dependable performance, whether fishing a stillwater or a flowing river.

Technical Specifications:

Brand – Pro FL
Model – Team Feeder
Product Type – Feeder Rod / Bottom Fishing Rod
Length – 3.90 m
Casting Weight – 60-180 g
Material – Carbon Fibre
Handle – Cork
Quiver Tips – 3 Supplied, Different Sensitivity Ratings
Guides – K-Type Guides on All Quiver Tips
Rod Guides – Larger Diameter for Reduced Friction
Construction – Lightweight
Fishing Techniques – Feeder Fishing, Bottom Fishing
Suitable Waters – Still Waters and Rivers with Stronger Current

The MiracleFish Super Hard 3.90m 60-120g feeder rod is a quality feeder rod for catching fish both in still water and slower flowing rivers. Made from high quality carbon fibre, this rod has excellent fish strike transmission, while the harder blank provides stability in the current when using heavier feeders.

The rod has three different sensitivity tips that can be changed according to fishing conditions. With the harder tip, the feeder copes well with the pressure of the current, while the softer tip allows you to feel even the most delicate fish strikes. All tips are fitted with K-rings to prevent the line from getting caught around the tip.

The cork handle provides excellent hand grip even in wet conditions, while the coarse rings of the rod allow the knots to pass through easily and avoid obstructions during casting. The rod is lightweight at just 265g, making fishing comfortable and enjoyable even during longer fishing sessions.

This 3.9m (60-120g) feeder rod is ideal for fishing far from shore, but can also be used for closer distances. It is a versatile choice for beginners and those who appreciate precision, sensitivity and comfort.

Haldorado Team Feeder By Dome Carp Fighter Feeder 3.90m H 45-120g is a high-quality heavy-duty feeder rod built for long-range casting and for targeting big fish. As part of the Team Feeder range, it is designed for anglers who need a rod that combines casting power with the control required to subdue hard-fighting carp and other large specimens.

The rod blank is constructed from strong carbon fibre, a material chosen for its excellent balance of low weight and structural strength. This keeps the rod manageable during long sessions while providing the backbone needed to cast heavy feeders accurately and to apply pressure when playing a fish. The result is a rod that feels responsive in the hand yet retains the reserves of power expected from a heavy feeder model.

The handle is made from a combination of cork and EVA materials. Cork offers a traditional, warm and comfortable grip, while EVA adds durability and a secure hold in wet conditions. Together they give the angler reliable control during the cast and when pumping a fish towards the net, reducing fatigue over a full day on the bank.

The rod is supplied with two quiver tips, allowing you to adapt the setup to different conditions. A lighter tip can be used in calmer water or when bites are delicate, while a stiffer tip suits stronger flows, longer casts or bigger baits. This flexibility makes the rod suitable for a wide range of feeder fishing situations.

SiC guides are fitted along the blank. These hard-wearing ceramic rings allow the line to run smoothly with minimal friction, which supports cleaner casting and helps protect the line during repeated long-distance casts. Smooth line flow is particularly valuable when fishing at range, where every bit of efficiency counts.

With a length of 3.90 m and a casting weight range of 45-120 g, this rod is well suited to distance feeder work on large stillwaters, rivers and commercial venues. The heavy rating means it can handle substantial feeders and leads, making it a practical choice for anglers chasing big carp and other powerful fish at long range.

Whether you are an experienced feeder angler looking for a dependable distance tool or a newcomer wanting a rod that can grow with your skills, the Haldorado Team Feeder Carp Fighter Feeder offers a solid combination of carbon construction, comfortable cork and EVA handle, twin tips and smooth SiC guides.

Technical Specifications:

Brand – Haldorado
Model – Team Feeder By Dome Carp Fighter Feeder
Product Type – Heavy Feeder Rod / Bottom Fishing Rod
Length – 3.90 m
Casting Weight – 45-120 g
Power Class – H (Heavy)
Blank Material – Carbon Fibre
Handle Material – Cork and EVA
Guides – SiC
Supplied Tips – 2 Quiver Tips
Fishing Techniques – Feeder Fishing, Long-Range Bottom Fishing
Suitable For – Long-Distance Casting, Big Fish

Team Feeder By Döme Fine Method Feeder MH 3.90m 40-100g is the latest high-quality rod series from Team Feeder By Döme, developed for both amateur and professional anglers. Thanks to continuous technological development and advanced blank manufacturing processes, the new Fine Method Feeder rods incorporate numerous innovations that set them apart from conventional feeder rods.

The rod features a fast action that makes it easy to cast even smaller feeders accurately to the desired spot. This responsive tip recovery helps you place your rig precisely, whether you are fishing at short range or targeting distant features. The fast action also assists with quick line pickup after the cast, keeping you in contact with your feeder at all times.

After a bite, the rod evenly absorbs the fish's resistance, ensuring maximum control and a successful landing process. The progressive curve through the middle and butt sections cushions lunges from hard-fighting fish while retaining enough backbone to steer them away from snags and into open water.

The blank is fitted with Seaguide SIC guides, which ensure low friction, long-term durability and smooth line flow without resistance. These quality guides also help to increase casting distance, as the line passes freely through the rings during the cast. The SIC inserts are hard-wearing and resistant to grooving, even when using braided main lines.

The rod is equipped with an ergonomic reel seat that holds your reel securely and comfortably, reducing movement during powerful casts and retrieves. The non-slip, extremely comfortable handle will not weigh down or tire your hands, even during long sessions on the bank. The handle material provides a secure grip in wet conditions, helping you maintain control when playing fish.

With a length of 3.90 m and a casting weight range of 40-100 g, this MH (Medium Heavy) model is well suited to method feeder fishing on stillwaters, commercial fisheries and slow-moving rivers. The 3.90 m length offers good leverage for casting and fish-playing, while the 40-100 g casting range covers a wide variety of method feeder weights and loaded feeders.

Whether you are a pleasure angler looking for a reliable method feeder rod or a competitive match angler seeking a precise and powerful tool, the Team Feeder By Döme Fine Method Feeder MH delivers the performance and build quality expected from the Team Feeder By Döme range.

Technical Specifications:

Brand – Team Feeder By Döme
Model – Fine Method Feeder MH
Product Type – Method Feeder Rod
Length – 3.90 m
Casting Weight – 40-100 g
Action – Fast
Guides – Seaguide SIC
Reel Seat – Ergonomic
Handle – Non-slip, comfortable grip
Available Variants – 390 cm
Fishing Techniques – Method Feeder, Feeder Fishing
Suitable Waters – Stillwaters, Commercial Fisheries, Slow-Moving Rivers

Team Feeder By Döme Fine Method Feeder MH 3.80m 30-90g is the latest high-quality rod series from Team Feeder By Döme, developed for both recreational and professional anglers. Thanks to continuous technological development and advanced blank manufacturing processes, the new Fine Method Feeder rods incorporate a range of innovations that make them a strong choice for modern method feeder fishing.

The rod features a fast action that supports easy and accurate casting, even with smaller feeders, allowing you to place your rig precisely in the target area. This is particularly useful when fishing pressured venues where accuracy and presentation make a real difference.

After a bite, the rod absorbs the fish's resistance smoothly and progressively, helping you maintain maximum control during the fight and supporting a successful landing process. The balanced curve under load gives you confidence when playing larger fish on appropriate tackle.

The blank is fitted with Seaguide SIC guides, which provide low friction, long-term durability and smooth line flow with minimal resistance. This can also help support longer casting distances when required, while reducing wear on both line and guides over time.

The rod is equipped with an ergonomic reel seat that keeps the reel securely positioned and comfortable in the hand during long sessions. The non-slip handle is designed for a secure grip and remains comfortable even during extended use, helping to reduce hand fatigue.

With its 3.80 m length and 30-90 g casting weight, this model is well suited to method feeder and commercial fishery tactics where a balance of casting control, fish-playing performance and reliable component quality is required.

Technical Specifications:

Brand – Team Feeder By Döme
Model – Fine Method Feeder MH
Product Type – Method Feeder Rod
Length – 3.80 m
Casting Weight – 30-90 g
Action – Fast
Guides – Seaguide SIC
Reel Seat – Ergonomic
Handle – Non-slip
Available Variant – 380 cm
Reference – 1871-380
Fishing Technique – Method Feeder
Suitable For – Recreational and professional anglers

Team Feeder By Döme Fine Method Feeder L 3.30m 10-30g is the latest high-quality rod series from Team Feeder By Döme, designed for both amateur and professional anglers. Thanks to continuous technological development and improvements in blank manufacturing processes, the new Fine Method Feeder rods incorporate numerous innovations that enhance performance on the bank.

The rod features a fast action that allows easy and precise casting of even smaller method feeders to the desired spot. This makes it an excellent choice for accurate bait placement when targeting wary fish in pressured venues.

After the bite, the rod evenly absorbs the fish's resistance, ensuring maximum control and a successful landing process. The progressive curve helps protect light hooklinks while still giving you the authority to steer fish away from snags.

The blank is fitted with Seaguide SIC guides, which ensure low friction, durability and smooth line flow without resistance. These guides also help to increase casting distance, making them ideal for reaching distant feeding areas.

The rod has an ergonomic reel seat that keeps your reel securely in place and provides a comfortable grip during long sessions. The non-slip, extremely comfortable handle will not weigh down or tire your hands, even during extended use.

With a length of 3.30m and a casting weight of 10-30g, this rod is suitable for a wide range of method feeder and bomb fishing situations on commercial fisheries, lakes and rivers. Whether you are a weekend angler or a serious match competitor, the Fine Method Feeder L offers the precision and reliability you need.

Technical Specifications:

Brand – Team Feeder By Döme
Model – Fine Method Feeder L
Product Type – Method Feeder Rod
Length – 3.30 m
Casting Weight – 10-30 g
Action – Fast
Guides – Seaguide SIC
Reel Seat – Ergonomic
Handle – Non-slip, comfortable
Fishing Techniques – Method Feeder, Bomb Fishing
Suitable Waters – Commercial Fisheries, Lakes, Rivers

Haldorado Team Feeder Carp Fighter Feeder Rod 3.60m H 40-100g is a high-quality heavy feeder rod designed for long-distance casting and targeting large fish. Built for anglers who demand reliability and performance, this rod combines a powerful carbon blank with practical features that make it an excellent choice for demanding feeder fishing situations.

The rod blank is constructed from strong carbon fibre, which provides an excellent balance of low weight and high strength. This allows the rod to remain manageable during long sessions while retaining the backbone needed to cast heavy feeders and control powerful fish. The 3.60 m length and heavy 40-100 g casting weight make this rod particularly suitable for distance feeder work on large stillwaters and rivers.

The handle is made from a combination of cork and EVA materials, offering a comfortable grip and reliable control when playing fish. Cork provides a classic feel and natural warmth, while EVA adds durability and a secure hold in wet conditions. This hybrid handle design helps reduce fatigue during repeated casting and gives the angler confidence when applying pressure to a hooked fish.

The rod is supplied with two quiver tips, allowing you to adapt the rod to different conditions and bite indications. Whether you need a more sensitive tip for cautious bites or a stiffer tip for casting heavy feeders in windy conditions, the included tips give you flexibility on the bank. The blank is fitted with SiC guides, which allow the line to run smoothly with minimal friction. This helps improve casting distance and reduces wear on both the line and the guides during repeated casts.

This rod is a great choice for both beginners and experienced anglers looking for a dependable and effective rod for long-distance feeder fishing. Its heavy rating and robust construction make it well suited to targeting carp and other large fish at range, while the carbon blank and quality components ensure it performs reliably session after session.

Technical Specifications:

Brand – Haldorado
Model – Team Feeder By Dome Carp Fighter Feeder
Product Type – Heavy Feeder Rod
Length – 3.60 m
Casting Weight – 40-100 g
Power Class – Heavy (H)
Blank Material – Carbon Fibre
Handle Material – Cork and EVA
Guides – SiC
Included Tips – 2 Quiver Tips
Fishing Technique – Feeder Fishing, Long-Distance Casting
Suitable For – Beginners and Experienced Anglers
Target Species – Carp and Other Large Fish

Okuma Ceymar V2 Big River is a 2025 novelty and a high-quality bottom fishing rod designed for fishing with heavy lures in flowing waters at long distances. This rod features a fast action and high power while retaining sensitivity, allowing both precise and extremely long casts and the ability to feel the slightest touch of a fish.

The blank is made from high-modulus carbon fibre, making it very strong. The balanced blank provides excellent control over a hooked catch and transmits its impacts effectively. The comfortable, non-slip EVA handle offers a secure grip even with wet palms and reduces hand fatigue during long fishing sessions.

High-quality guides ensure smooth and precise line glide, helping to make accurate casts even at long distances. The set includes two tips of different sensitivity - 5oz and 6oz.

Technical Specifications:

Brand – Okuma
Model – Ceymar V2 Big River
Product Type – Bottom Fishing Rod
Length – 3.90 m
Casting Weight – Up to 230 g
Action – Fast
Material – High-Modulus Carbon Fibre
Handle – EVA, Non-Slip
Guides – High-Quality
Included Accessories – 2 Tips (5oz and 6oz)
Fishing Techniques – Bottom Fishing, Heavy Lure Fishing
Suitable Waters – Flowing Waters
Key Features – High Power, Sensitivity, Long Casting

Okuma Ceymar V2 Feeder Rod is a 2025 novelty and the updated version of the well-known Okuma Ceymar Feeder model. It has been developed for anglers who demand a sensitive yet powerful feeder rod for both still and flowing waters, and it combines a slim, well-balanced blank with the reliable build quality associated with the Okuma name.

The blank is constructed from high-modulus carbon fibre, which keeps the rod light in the hand while providing the strength needed for confident casting and playing fish. The slim profile and balanced feel reduce fatigue during long sessions, and the blank delivers a fast, sensitive action that transmits even the slightest contact from fish. This makes the rod particularly effective when bite indication needs to be precise, whether you are fishing a commercial stillwater or a steady river swim.

Fitted with new-concept guides, the Ceymar V2 promotes smooth line flow during the cast and retrieve. The guides are robust, durable and sufficiently wide to support reliable line management, helping to reduce friction and allowing the line to travel freely. The blank itself absorbs shocks well, which is a practical advantage when playing hard-fighting fish at close range or when using lighter hooklinks.

The rod features an ergonomic EVA handle that offers a comfortable grip during long fishing sessions. EVA is a practical choice for feeder fishing because it provides a secure hold even with wet hands, and it remains comfortable during repeated casting and retrieving. The handle section is designed to balance the rod and support a natural, relaxed fishing posture.

Supplied with two quiver tips of different sensitivity, 4oz and 5oz, the Ceymar V2 can be adapted to the venue and the weight being fished. The 4oz tip is suited to more delicate presentations and calmer conditions, while the 5oz tip offers a stiffer, more stable indication when fishing heavier feeders or in stronger flow. This interchangeability makes the rod a versatile choice for a range of feeder fishing situations.

The Okuma Ceymar V2 Feeder Rod is available in 3.90 m and 4.20 m lengths, both rated to a casting weight of up to 150 g. The longer 4.20 m version offers additional reach and line control, which can be useful on larger waters or when fishing at longer range, while the 3.90 m version remains manageable and responsive for closer-range work. Both lengths share the same sensitive carbon blank and quiver tip system.

This rod is well suited to feeder fishing on stillwaters and rivers, including lakes, ponds, reservoirs and slow to medium-flowing rivers. It is a practical option for anglers targeting species such as bream, roach, tench, carp and other coarse fish where sensitive bite detection and reliable casting performance are important. Whether you are fishing a method feeder, a cage feeder or a straight lead, the Ceymar V2 is designed to handle the demands of modern feeder angling.

Technical Specifications:

Brand – Okuma
Model – Ceymar V2
Product Type – Feeder Rod
Length – 3.90 m / 4.20 m
Casting Weight – Up to 150 g
Blank Material – High-Modulus Carbon Fibre
Action – Fast, Sensitive
Guides – New-Concept Guides
Handle – Ergonomic EVA
Quiver Tips – 2 Supplied (4oz and 5oz)
Available Variants – 3.90 m, 4.20 m
Fishing Techniques – Feeder Fishing, Method Feeder, Cage Feeder, Straight Lead
Suitable Waters – Stillwaters and Rivers
Target Species – Bream, Roach, Tench, Carp and Other Coarse Fish

Pro FL Competition Carp Feeder Quiver Tip is a replacement quiver tip designed for the FL Competition Carp Feeder rod range rated up to 130 g. Made from carbon fibre, it offers a lightweight and responsive solution for anglers who want to restore or fine-tune the bite indication of their feeder rod.

The tip is constructed from carbon fibre, a material widely chosen for rod tips because it combines low weight with good responsiveness. This helps the tip register subtle movements at the rig end, making it easier to read bites when fishing with a feeder or method feeder setup.

As a dedicated spare part for the FL Competition Carp Feeder up to 130 g rod, this quiver tip is intended to fit that specific model. Replacing a damaged or lost tip with the correct component helps maintain the original balance and behaviour of the rod.

Quiver tips are a practical accessory for feeder fishing. Having a spare tip available means you can continue fishing if a tip is broken in transit, during setup or while playing a fish. It also allows you to keep the rod ready for different conditions without needing to change the whole rod.

This tip is suitable for carp feeder fishing and general feeder work where the rod is rated up to 130 g. It is a straightforward, functional component for anglers using the compatible Pro FL Competition Carp Feeder rod.

Technical Specifications:

Brand – Pro FL
Model – Competition Carp Feeder Quiver Tip
Product Type – Feeder Rod Quiver Tip
Material – Carbon Fibre
Compatibility – FL Competition Carp Feeder Rods up to 130 g
Maximum Rod Rating – 130 g
Function – Bite Indication / Replacement Tip
Fishing Technique – Feeder Fishing
Target Species – Carp
Suitable For – Feeder and Method Feeder Angling

Atora Ineffable-X 3.90m 120g is a robust and durable bottom fishing rod designed for anglers who demand reliability and sensitivity in equal measure. Whether you are fishing stillwaters, lakes, ponds or slow to medium-flow rivers, this rod delivers the control and feedback needed to present baits confidently and strike effectively.

The blank is slim, lightweight and built with a fast action, making the rod responsive and pleasant to handle during long sessions. Its sensitive nature allows it to transmit even subtle bites, while the fast taper provides the backbone required to set the hook and steer fish away from snags or obstacles.

The rod guides are fitted without ceramic inserts, keeping the build simple and robust. Supplied with the rod are three carbon fibre quiver tips of differing sensitivity, each fitted with ceramic guides. These interchangeable tips allow you to adapt the rod to the conditions, choosing a finer tip for calm, delicate presentations or a stiffer tip when fishing in wind, flow or when targeting larger fish.

When a fish is hooked, the Ineffable-X maintains excellent control. The sensitive blank relays every movement and surge of the fish, turning the fight into an enjoyable and engaging experience rather than a battle of brute force. This makes the rod well suited to a wide range of bottom fishing and feeder-style approaches.

The handle combines a part cork, part EVA construction, offering a comfortable grip that reduces fatigue during extended sessions. Cork provides a traditional feel and warmth in cooler weather, while EVA adds durability and grip. The result is a handle that remains comfortable cast after cast, hour after hour.

With a length of 3.90 m and a casting weight of up to 120 g, the Atora Ineffable-X is a versatile tool for ledgering, feeder fishing and general bottom fishing. It balances power with sensitivity, making it suitable for a variety of venues and target species where accurate bait presentation and reliable bite indication are essential.

Technical Specifications:

Brand – Atora Fishing
Model – Ineffable-X
Product Type – Bottom Fishing Rod / Feeder Rod
Length – 3.90 m
Casting Weight – Up to 120 g
Action – Fast
Blank – Slim, lightweight, sensitive
Rod Guides – Without ceramic inserts
Quiver Tips – Three carbon fibre tips of differing sensitivity, with ceramic guides
Handle – Part cork, part EVA
Fishing Techniques – Bottom fishing, feeder fishing, ledgering
Suitable Waters – Stillwaters and flowing waters