Best Sellers
Best Sellers
New Products
New Products
Holders, accessories
-
copy of Awning GURU Rive Awning
€47.99Matrix Storm Cover - awning for side table. The material is completely waterproof, so your lures will be protected from water, wind and sun. The awning is made of very strong and high quality materials.
-
Bait Jar Holder Pro FL
€5.70Bait jar holder, attached to the pole. The holder has a universal thread. Convenient tool for fishing from the shore and in the water. Saves the angler's time, as this tool can be placed close by at all times and the baits will always be at hand.
The holder is suitable for G012 and G013 jars.Dimensions - 18,5x18,5x3cm
-
Fishing rod holders FL
€4.70A set of rubberised rod holders that snap onto the pole. Made of sturdy material. Thanks to the rubberised material, the rod sits very firmly between the bumps of the holder and stays steady.
Height - 6cm
Width between lugs - 2cm -
Table with awning Atora
€84.80Side table for chair or platform. Attaches at one point to the leg. Has a telescopic support leg with adjustable length from 50 to 80cm. Suitable for all chairs and platforms with 25, 30 or 36mm legs. It has a retractable, removable canopy to protect against wind, rain or sun. The table is reinforced on the underside, but its weight is not significant as it is made of lightweight materials.
Dimensions - 55x40cm
-
Fishing rod holder Preston Space Saver 360
€41.99Preston XS Feeder Arm Standart is a universal holder with 360 degrees of movement, allowing the angler to position the rod support at almost any angle. 36mm with 30mm sleeve.
-
Carp Expert Bait Table
€25.99Practical, sturdy, small table with telescopic, adjustable and foldable legs. The high table edges prevent bait or other objects from falling off. Telescopic, adjustable legs allow you to place the table on any uneven surface and keep the table stable.
Dimensions - 28x43cm
-
Table FOX Bivvy Table
€50.90Table with telescopic legs. Small and easy to transport. Suitable for both fishing and camping. Telescopic, adjustable legs allow you to place the table on any uneven surface and keep the table stable.
Table top dimensions - 47x28cm
Height - adjustable from 24 to 33cm -
Fishing rod holder Flagman IMP Rotating Side Quiver Rest
€8.40Flagman IMP Rotating Side Quiver Rest is a modern design rod holder, suitable for a wide range of rod shafts, threaded onto the rod holders. The head of the holder is made of durable plastic and has a non-slip rubberised coating. The unique design of this holder allows rods to be positioned at any angle and the line always runs freely through the grooves. The raised edges ensure that fish cannot pull the rod out of the holder.
Length - 24cm
-
Fishing rod holder Flagman Rotating Side Quiver Rest
€8.65Flagman Rotating Side Quiver Rest - modern design rod holder, suitable for various rod shafts, threaded to the rod holders. The head of the holder is made of durable plastic and has a non-slip rubberised coating. The unique design of this holder allows rods to be positioned at any angle and the line always runs freely through the grooves. The raised edges ensure that fish cannot pull the rod out of the holder.
Length - 24cm
-
Rod holder Flagman Armadale Feeder Arm Medium
€72.40Flagman Armadale Feeder Arm Medium - ergonomic and lightweight rod holder with 2 attachment points. Attaches to 25, 30, 36mm diameter legs. Made of special aluminium alloy, it is robust, lightweight and provides stability to the fishing rod.
Length - 75cm
-
Fishing rod holder Flagman 90 Foam Team Rest EVA
€9.60Flagman 90 Foam Team Rest EVA - rod holder suitable for various rod shafts, threaded to the rod holders. The head of the holder is made of EVA material, which is soft and protects fishing rods from external damage. The balls at the ends ensure that fish cannot easily pull the rod out of the holder.
Length - 34cm
-
Marquee table Preston Venta-Lite Hoodie Side Tray XL
€149.99Preston Venta-Lite Hoodie Side Tray - table with awning. The table is large enough to hold a large amount of baits and protect them from rain or sunlight with the hood. There is a ruler at the front of the table. The special table clamps attached to the legs of the platform are strong enough to withstand larger quantities of lures. The hood is secured by two handwheels on the sides of the table.
Dimensions -27x79x61cm
-
Rod holder Team Feeder By Döme Competition
€8.85Haldorado Team Feeder Competition is a modern design rod holder, suitable for a wide range of rod shafts, threaded onto the rod holders. The holder is made of durable, unbreakable TPE plastic and has a non-slip rubberised coating. The raised edges ensure that fish cannot pull the rod out of the holder. The name series of the Haldorado's multiple world champion Döme Gábor.
Length - 27cm
Video review ...
-
Atrama Haldorado Star Arm Rest
€11.30Haldorado Star Arm Rest - a corner support with a rough surface for comfortable positioning of the rod shaft or limb, threaded to the rod holders. The head of the holder is made of EVA material, which is soft and protects the rods from external damage. The balls at the ends guarantee that fish cannot easily remove the rod from the holder.
Length - 20cm
-
Rod holder Haldorado Star Rod Rest Curved
€11.00Haldorado Star Rod Rest Curved - rod holder suitable for a variety of rod shafts, threaded onto rod holders. The head of the holder is made of EVA material, which is soft and protects fishing rods from external damage. The balls at the ends ensure that fish cannot easily pull the rod out of the holder.
Length - 20cm
-
Rod holder Team Feeder By Döme
€13.80Haldorado Team Feeder Rod Holder is a modern design rod holder, suitable for a wide range of rod shafts, threaded onto the rod holders. The head of the holder is made of EVA material, which is soft and protects fishing rods from external damage. The raised edges ensure that fish cannot pull the rod out of the holder. The name series of the Haldorado's multiple world champion Döme Gábor.
Length - 30cm
-
Fishing rod holder GURU Mini Stealth Reaper Rear Rest
€6.49GURU Mini Stealth Reaper Rear Rest - sturdy rod holder with brass thread. The unique design of this holder allows rods to be positioned at any angle and the line always runs freely through the grooves. Suitable for all types of rod shafts.
-
Grid holder Preston Cross Arm
€20.99Preston Cross Arm - a strainer holder that is mounted on a chair or platform. Ultra-compact design. Quickly and easily removable, with a quick connector. Once attached, the holder is perfect for holding a fishing rod. Fits 23mm, 25mm and 30mm round legs.
Length - 30cm
-
Rod holder Team Feeder By Döme Reaper
€9.65Haldorado Team Feeder Reaper Rod Holder is a modern design rod holder, suitable for various rod shafts, threaded to the rod holders. The head of the holder is made of durable, unbreakable TPE plastic and has a non-slip rubberised coating. It has a soft surface to protect the rod from external damage. The unique design of this holder allows the rods to be placed at any angle and the line always runs freely through the grooves. The raised edges ensure that fish cannot pull the rod out of the holder. The name series of the Haldorado's multiple world champion Döme Gábor.
Length - 20cm
-
Rod holder Team Feeder By Döme Tornado
€5.20Haldorado Team Feeder Tornado Rod Holder is a modern design rod holder, suitable for various rod shafts, threaded to the rod holders. The holder head is made of durable, unbreakable TPE plastic and has a non-slip rubberised coating. It has a soft surface to protect the rod from external damage. The special design of the holder ensures that the line will not get stuck. The name series of the Haldorado's multiple world champion Döme Gábor.
Dimensions - 8,5x8cm