Holders, accessories

Matrix Storm Cover - awning for side table. The material is completely waterproof, so your lures will be protected from water, wind and sun. The awning is made of very strong and high quality materials.

Bait jar holder, attached to the pole. The holder has a universal thread. Convenient tool for fishing from the shore and in the water. Saves the angler's time, as this tool can be placed close by at all times and the baits will always be at hand.
The holder is suitable for G012 and G013 jars.

Dimensions - 18,5x18,5x3cm

A set of rubberised rod holders that snap onto the pole. Made of sturdy material. Thanks to the rubberised material, the rod sits very firmly between the bumps of the holder and stays steady.

Height - 6cm
Width between lugs - 2cm

Side table for chair or platform. Attaches at one point to the leg. Has a telescopic support leg with adjustable length from 50 to 80cm. Suitable for all chairs and platforms with 25, 30 or 36mm legs. It has a retractable, removable canopy to protect against wind, rain or sun. The table is reinforced on the underside, but its weight is not significant as it is made of lightweight materials.

Dimensions - 55x40cm

Preston XS Feeder Arm Standart is a universal holder with 360 degrees of movement, allowing the angler to position the rod support at almost any angle. 36mm with 30mm sleeve.

Practical, sturdy, small table with telescopic, adjustable and foldable legs. The high table edges prevent bait or other objects from falling off. Telescopic, adjustable legs allow you to place the table on any uneven surface and keep the table stable.

Dimensions - 28x43cm

Table with telescopic legs. Small and easy to transport. Suitable for both fishing and camping. Telescopic, adjustable legs allow you to place the table on any uneven surface and keep the table stable.

Table top dimensions - 47x28cm
Height - adjustable from 24 to 33cm

Flagman IMP Rotating Side Quiver Rest is a modern design rod holder, suitable for a wide range of rod shafts, threaded onto the rod holders. The head of the holder is made of durable plastic and has a non-slip rubberised coating. The unique design of this holder allows rods to be positioned at any angle and the line always runs freely through the grooves. The raised edges ensure that fish cannot pull the rod out of the holder.

Length - 24cm

Flagman Rotating Side Quiver Rest - modern design rod holder, suitable for various rod shafts, threaded to the rod holders. The head of the holder is made of durable plastic and has a non-slip rubberised coating. The unique design of this holder allows rods to be positioned at any angle and the line always runs freely through the grooves. The raised edges ensure that fish cannot pull the rod out of the holder.

Length - 24cm

Flagman Armadale Feeder Arm Medium - ergonomic and lightweight rod holder with 2 attachment points. Attaches to 25, 30, 36mm diameter legs. Made of special aluminium alloy, it is robust, lightweight and provides stability to the fishing rod.

Length - 75cm

Flagman 90 Foam Team Rest EVA - rod holder suitable for various rod shafts, threaded to the rod holders. The head of the holder is made of EVA material, which is soft and protects fishing rods from external damage. The balls at the ends ensure that fish cannot easily pull the rod out of the holder.

Length - 34cm

Preston Venta-Lite Hoodie Side Tray - table with awning. The table is large enough to hold a large amount of baits and protect them from rain or sunlight with the hood. There is a ruler at the front of the table. The special table clamps attached to the legs of the platform are strong enough to withstand larger quantities of lures. The hood is secured by two handwheels on the sides of the table.

Dimensions -27x79x61cm

Haldorado Team Feeder Competition is a modern design rod holder, suitable for a wide range of rod shafts, threaded onto the rod holders. The holder is made of durable, unbreakable TPE plastic and has a non-slip rubberised coating. The raised edges ensure that fish cannot pull the rod out of the holder. The name series of the Haldorado's multiple world champion Döme Gábor.

Length - 27cm

Video review ...

Haldorado Star Arm Rest - a corner support with a rough surface for comfortable positioning of the rod shaft or limb, threaded to the rod holders. The head of the holder is made of EVA material, which is soft and protects the rods from external damage. The balls at the ends guarantee that fish cannot easily remove the rod from the holder.

Length - 20cm

Haldorado Star Rod Rest Curved - rod holder suitable for a variety of rod shafts, threaded onto rod holders. The head of the holder is made of EVA material, which is soft and protects fishing rods from external damage. The balls at the ends ensure that fish cannot easily pull the rod out of the holder.

Length - 20cm

Haldorado Team Feeder Rod Holder is a modern design rod holder, suitable for a wide range of rod shafts, threaded onto the rod holders. The head of the holder is made of EVA material, which is soft and protects fishing rods from external damage. The raised edges ensure that fish cannot pull the rod out of the holder. The name series of the Haldorado's multiple world champion Döme Gábor.

Length - 30cm

GURU Mini Stealth Reaper Rear Rest - sturdy rod holder with brass thread. The unique design of this holder allows rods to be positioned at any angle and the line always runs freely through the grooves. Suitable for all types of rod shafts.

Preston Cross Arm - a strainer holder that is mounted on a chair or platform. Ultra-compact design. Quickly and easily removable, with a quick connector. Once attached, the holder is perfect for holding a fishing rod. Fits 23mm, 25mm and 30mm round legs.

Length - 30cm

Haldorado Team Feeder Reaper Rod Holder is a modern design rod holder, suitable for various rod shafts, threaded to the rod holders. The head of the holder is made of durable, unbreakable TPE plastic and has a non-slip rubberised coating. It has a soft surface to protect the rod from external damage. The unique design of this holder allows the rods to be placed at any angle and the line always runs freely through the grooves. The raised edges ensure that fish cannot pull the rod out of the holder. The name series of the Haldorado's multiple world champion Döme Gábor.

Length - 20cm

Haldorado Team Feeder Tornado Rod Holder is a modern design rod holder, suitable for various rod shafts, threaded to the rod holders. The holder head is made of durable, unbreakable TPE plastic and has a non-slip rubberised coating. It has a soft surface to protect the rod from external damage. The special design of the holder ensures that the line will not get stuck. The name series of the Haldorado's multiple world champion Döme Gábor.

Dimensions - 8,5x8cm

Haldorado Team Feeder Flexi Rod Holder is a modern design rod holder, suitable for a wide range of rod shafts, threaded onto the rod holders. The head of the holder is made of durable, unbreakable TPE plastic and has a non-slip rubberised coating. It has a soft surface to protect the rod from external damage. At the touch of a button, the holder can be tilted through 180 degrees for optimal positioning of the rod on any steep bank. The name-brand gear series of Haldorado's multiple world champion Döme Gábor.

Dimensions - 7x12cm

Haldorado Team Feeder Comb is a modern design rod holder, suitable for a wide range of rods, threaded onto the rod holders. The head of the holder is made of durable, unbreakable TPE plastic and coated with a non-slip rubberised coating, which ensures that the rod will hold steady and prevent slipping, and at the moment of a fish bite, will allow you to pull the rod out and make the crossing easily. The holder has a soft surface to protect the rod from external damage. The name series of the Haldorado's multiple world champion Döme Gábor.

Dimensions - 6,5x10,5cm

Match Pro Method Rotating Side Quiver - sturdy threaded rod holder. The unique design of this holder allows the rods to be positioned at any angle and the line always runs freely through the grooves. Suitable for all types of rod shafts.

Length - 24cm

Match Pro Long Nose Rod Read Rest is a sturdy rod rest that fits all rods. This rod holder has long bumps that will hold the rod firmly and stably.

Height - 12cm
Width between bumps (feeder) - 2,5cm

Match Pro Rotating Side Quiver Rest - sturdy threaded rod holder. The unique design of this holder allows the rods to be positioned at any angle and the line always runs freely through the grooves. Suitable for all types of rod shafts.

Length - 24cm

Carp Expert - rubberised threaded rod holder that snaps onto the pole. Made of durable material. The rod sits very firmly between the bumps of the holder and stays steady.

Height - 7,5cm
Width between lugs - 4cm

Preston Eva Bowl And Hoop S - made of sturdy material, adjustable in different directions with fasteners. It can be conveniently mounted on chairs or fishing platforms. Suitable for 23, 25, 30, 36mm leg.

Dimensions:
Inner diameter - 27cm
Depth- 15cm

Preston TheVenta-Lite Tray is an extremely sturdy and comfortable side table. Made of Venta-Lite material, which increases air circulation, keeping baits cooler for longer. Can be attached to any platform using the included grommets (23mm, 25mm and 30mm) or 36mm without grommets.

Dimensions - 77x28cm

Preston Venta-Lite Hoodie Side Tray - awning for the side table. The material is completely waterproof, so your lures will be protected from water, wind and sun. The awning is made of very strong and high quality materials.

Dimensions - 43x39x28cm

Preston XS Feeder Arm Standart - telescopic, stable and sturdy two-point feeder arm. Easily adjustable lift angle and length. Suitable for 23, 25, 30 and 36mm platform or chair legs.

Length - 70-120cm

Carp Expert - rubberised threaded rod holder that snaps onto the pole. Made of sturdy plasmases. The rod sits very firmly between the bumps of the holder and holds steady.

Height - 6cm
Width between lugs - 2cm

Carp Expert IMP Comb Rod Rest is a modern design rod holder, suitable for various rods, threaded to the rod holders. The soft material (flexible, rubber-like) will hold the rod steady and prevent it from slipping, and at the moment of a fish strike, it will allow you to pull the rod out and make the crossing easily.

Carp Expert Rubberised Rod Rest - threaded rubber rod holders that snap onto the pole. Made of strong and flexible rubber. The rod sits very firmly between the bumps of the rod holder and stays steady. The rubber surface of the holder protects the rod from scratches.

Quantity - 2 pcs.
Height - 3cm
Width between lugs - 1cm

Carp Expert Butt Grip Soft is a threaded plastic rod holder that snaps onto various rod holders. Made of soft and sturdy plastic. The rod sits very firmly between the bumps of the holder and holds steady.

Height - 3cm
Width between lugs - 1,5cm

Kamasaki Rod Rest Head is a plastic rod holder with a thread that snaps onto the pole. Made of sturdy plastic. The rod sits very firmly between the bumps of the holder and stays steady.

Height - 4cm
Width between lugs - 2cm

Carp Expert Top Line Rod Rest is a plastic rod holder with a threaded thread that snaps onto the pole. Made of soft and sturdy plastic. The rod sits very firmly between the bumps of the rod holder and stays steady.

Height - 4cm
Width between lugs - 2cm

Carp Expert Butt Grip Heavy Duty - plastic threaded rod holder that snaps onto the butt. Made of heavy-duty plastic. The rod is very comfortable to hold and stable.

Height - 3cm
Width between bumps - 2,5cm

Carp Expert Rod Rest is a plastic rod holder with a threaded thread that snaps onto the pole. The rod is very comfortable to hold and stable.

Height - 4cm
Width between bumps - 4cm

Preston Keepnet Arm Long - an extended strainer holder that is mounted on a chair or platform. Extra compact design. Quickly and easily removable, with quick connector. Fits 23mm, 25mm and 30mm round legs.

Length - 30cm

Threaded rod holder post. Telescopic stand made of aluminium alloy with a screw at the feeder for easy and quick positioning. The thread is standard, so you can screw in a beacon or other holder. High quality and strong locking. Often used in carp fishing as a buzz bar holder.

Available in different lengths:
60-105cm
80-145cm

Preston XS Feeder Arm Long - telescopic, stable and sturdy two-point feeder arm. Easily adjustable lift angle and length. Suitable for 23, 25, 30 and 36mm platform or chair legs.

Length - 105-185cm

Standard, convenient threaded rod holder. Suitable for screwing into all risers. Can support several rods at once.

Length - 30cm

The Atora Umbrella Holder is a telescopic umbrella holder made of sturdy metal, designed to attach to the leg of a chair or platform. The attachment is universal and will fit 25, 30 and 36mm diameter legs. The two attachment points significantly increase stability, especially in wind conditions. Suitable for umbrella shaft diameter 22mm.

Length - 20-35cm (adjustable)

FL Buzz Bar is a two rod holder suitable for carp or feeder fishing. The holder can be widened to fit the size of the reels. Can be attached to a pole or tripod stand. The holder has a quick-connect magnet, which eliminates the need to unscrew beacons or rod holders every time. A very handy item for carp or feeder fishing when you don't want to carry a lot of stuff. Also when fishing in narrow gaps in grass or bushes.

Length of holder - 17cm/22cm
Spacing between holders - 13,5cm/18cm

Two rod holder with pole. The holder can be expanded to fit the size of the reels. The length of the pole is adjustable from 31cm to 49cm so you can choose the desired height, and the length of the holder is adjustable from 17cm to 22cm. It is a very handy item for carp or feeder fishing, when you don't want to carry a lot of stuff. Also when fishing in narrow gaps in grass or bushes. The sturdy construction will prevent snagging, even with record catches.

Length of holder - 17cm/22cm
Spacing between holders - 13,5cm/18cm
Length of bench - 31cm/49cm

Threaded rod holder that swivels on the pole.
The angle of the holder can be adjusted. The rod rests comfortably and firmly on the silicone tube and rests exactly in the middle of the recess.

Width of holder - 28cm
Colour - green

Preston Deluxe Dutch Feeder Rest Short - metal threaded feeder rod holder. The material is soft and gentle and will protect your rods from external damage.

Length - 61,5cm

Preston Pole Grip - modern design rod holder, suitable for various rod shafts, threaded onto rod holders. The soft, durable plastic material will hold the pole steady and prevent slipping, and at the moment of a fish bite, it will allow you to pull the pole out easily and make the crossing.

Length - 6cm
Width between bumps - 4.5cm

Rod and reel stand. Telescopic stand made of aluminium alloy with a solid thread at the feeder.

Length - 85cm
Length when unfolded - 140cm

Plastic rod holders for threaded attachment to various rod holders. The holders open and close with a magnet. The rod will be held firmly and securely in place when the rod is inserted. The package contains 4 pcs.

Made of sturdy material, adjustable in different directions with fasteners. It can be conveniently mounted on a chair or fishing platform and, thanks to special adjusters, it is fixed in the right position. The bowl is spacious and allows sufficient bait or other ingredients to be added. The Atora Bowl&Holder is always close at hand, which is very convenient and saves time when periodically baiting the fishing area.

Threaded rod holder that engages on a ball. The angle of inclination of the holder can be adjusted. The rod rests comfortably and firmly on the silicone tube.

Length - 18cm

Preston Deluxe Dutch Feeder Rest Short - metal threaded feeder rod holder. The material is soft and gentle and will protect your rods from external damage.

Length - 34,5cm

Preston Rod Safe - Multi - sturdy threaded rod holder. The unique design of this holder allows the rods to be placed at any angle and the line always runs freely through the grooves. The high corners of the grooves prevent the rod from being pulled into the water during fish bites. Suitable for all types of rod shafts.

Length - 20cm

Preston Butt Gripper Rest - modern design rod holder, suitable for various rod shafts, threaded to the rod holders. The soft, TPE material (a flexible, rubber-like material) will hold the rod steady, prevent it from slipping and, when a fish strikes, make it easy to pull the rod out and make the pick.

Length - 6cm
Width between bumps - 4.5cm

The Atora QR Ripple Bar Double is a universal holder that is ideal for storing a wide range of tools. The holder is coated with a soft material that protects fishing rods or other fishing gear from damage. The QR (Quick release) system allows you to easily remove the holder from the platform/chair leg with the flip of a lever. Suitable for 25, 30 and 36mm legs.

Length - 35cm

Atora QR-NET Support - EVA corrugated grab handle holder. QR - Quick Release, quick release system. Conveniently attaches to a chair or platform. Suitable for 25, 30 and 36mm leg.

Length - 25cm

Method Rest - a corner support with a rough surface for comfortable positioning of the rod shaft or limb. With standard pressure, suitable for screwing onto all holders.

Length - 27,5cm

GURU Rive Awning - awning for side table. The material is completely waterproof, so your lures will be protected from water, wind and sun. The awning is made of very strong and high quality materials.

Available from:
XL - 49x39cm
XXL - 67x51cm

Bowl suitable for washing hands or lures. Attaches to a platform or feeder chair. Suitable for 25 and 36mm legs.

Diameter - 25cm
Depth10cm

Matrix 3D-R Multi Angle Rod Holder - three spare rods. Each holder removes separately from the main holder to make a 1, 2 or 3 rod holder. The angle of the rods can be adjusted to suit your needs. Mounts on 36, 30 and 25mm legs.

Video review ...

Soft, sturdy feeder rod holder with metal thread. The soft surface will not damage the rod

Length - 28cm

Prologic Butt Klinger Rod Rest Deluxe is a modern design, soft rubber rod holder, threaded to various rod holders. The ears of the holder flex and adapt to the rod to keep the rod stable. Package contains 2 pcs.

Dimensions:
Length - 4,5cm
Width between lugs - 1,3cm

Matrix Flexi Rod Butt Grip is a modern design, soft rubber rod holder that can be threaded onto various rod holders. With angle adjustment function. Comfortable and sturdy rod holder. Sold 1 piece.

Length - 6cm
Width between bumps - 2cm

Telescopic Feeder Arm Light for attachment to a chair. Suitable for 25 or 36mm diameter leg. The minimum length is 70cm and the maximum is 109cm.

Fil Fishing Filex Holder Duo 330 - metal threaded holder for feeder fishing rod. Rough surface.

Length - 31cm

Fil Fishing Filex Holder Max 330 - angle holder for feeder fishing rod with metal thread. Rough surface.

Length - 26cm

Side table for chair or platform. Attaches at one point to the leg, has a telescopic support leg with a standard thread at the top for attaching accessories. Suitable for all chairs and platforms with 36 and 25 mm legs. It has a retractable canopy to protect against wind, rain or sun. The table itself does not weigh a lot as it is made of lightweight materials.

Dimensions - 70x50cm

Table for feeder/feeder fishing, attached to a chair or seat box.

Dimensions - 25x28cm
Transportation - 23x40 cm, (28cm when detached from the chair attachment)

Fil Fishing Filex Power Arm - a stable and robust feeder arm. Adjustable lift angle and length. Suitable for 25mm, 30mm and 36mm platform or chair legs.

Length - 114cm

Filex Holder Fil is an accessory for comfortable and adjustable rod placement. Suitable for a wide range of chairs, as it has removable ivores.

Length - 31cm

Filex Holder Fil is an accessory for comfortable and adjustable rod placement. Suitable for a wide range of chairs, as it has removable ivores. It also has a brass thread at the end, which can be used to screw in a holder or other additional accessories.

Length - 33cm

Plastic rod holder with threaded thread that snaps onto the pole. The angle of tilt of the holder can be adjusted. The rod rests comfortably and firmly on the silicone tube and rests exactly in the middle of the recess.

Dimensions - 9.5x15cm

Plastic rod holder with threaded thread that snaps onto the pole. The angle of tilt of the holder can be adjusted. The rod rests comfortably and firmly on the silicone tube and rests exactly in the middle of the recess.

Threaded rod holder that snaps onto the pole. The angle of inclination of the holder can be adjusted. The rod rests comfortably and firmly on the silicone tube and rests exactly in the middle of the recess.

Threaded rod holder that snaps onto the pole. The angle of inclination of the holder can be adjusted. The rod rests comfortably and firmly on the silicone tube and rests exactly in the middle of the recess.

Fil Fishing Feeder Rod Rest - sturdy threaded rod holder. The unique design of this holder allows the rods to be positioned at any angle and the line always runs freely through the grooves. Suitable for all types of rods.

Length - 30cm

GURU Front Reaper Rest - sturdy rod holder with brass thread. The unique design of this holder allows rods to be positioned at any angle and the line always runs freely through the grooves. Suitable for all types of rod shafts.

GURU Rear Reaper Rest - a sturdy reel rest that fits all rods. The silicone inside ensures that the rod shaft will not get damaged and will not easily slip off during a big bite. This holder also has a 'lock' function that will keep the rod firmly and stably attached.

Prologic Twin Control Rod Rest - threaded rod holder. The inner part of the rod holder is soft, so it allows easy insertion and stability.

Matrix 3D-R X-Strong Bucket Hoop - an ultra-stable bait container holder with 2 attachment points. The bucket holder can be attached to a paltform or chair. Suitable for 25, 30 and 36mm legs.

Dimensions:
Inner diameter - 34,5cm
Depth- 10cm

Video overview ...

Matrix eVA Multi Rod Rests - new, modern design rod holder for attaching to the feeder arm, EVA coated (soft). The holders are smooth, with the possibility of adding side holders to prevent the rod from being pulled into the water.

Available in different lengths: 25 or 40cm.

Video review ...

Waterproof, elastic, rain and dustproof chair cover.

Video review ...

Table with folding, telescopic legs. Small and easy to transport. Suitable for both fishing and camping. Telescopic, adjustable legs allow you to place the table on any uneven surface and keep the table stable. The table also comes with a handy fabric tray with handles.

Table top dimensions - 47x31cm
The height-adjustable legs extend up to 31cm

Matrix 3D-R Keepnet Arm Long - an extended net holder that is mounted on a chair or platform. Ultra-compact design. Quick and easy to remove. Suitable for 25mm, 30mm and 36mm round legs.

Length - 30cm

Video overview ...

Table for feeder/feeder fishing. Half of the table is made of parfumed tin, the other half with a recessed bait container.

Dimensions - 51x47cm
Bait container size - 34x23x10cm

CarpZoom FC Save-F - angle holder for feeder fishing rod with metal thread. Rough surface.

Dimensions - 36x10x3cm

Rod holder - made of solid alloy, with metal rail. The rod is fitted with an elastic band to ensure good tightening. Very handy for feeder or method feeder fishing.

Matrix the3D-R Mega Feeder Arm is one of the most popular rod holders on the market. Ideal for use with longer rods in large lakes or rivers. The two-point arm is designed using the latest technology to maintain maximum stability. Feeder arm with built-in quick connectors - a convenient and time-saving advantage. Sturdy four-corner lock for adjusting the position of the rod holder. Double fixing points, with cross-brace, ensure a strong fixation. Feeder arm made of light and strong angled aluminium tube. Suitable for feeder chairs and platforms. For use on round legs with diameters of 25mm, 30mm and 36mm.

The length of the holder is adjustable from 80 to 130cm.

Video review...

The live bait jar holder is attached to the pole. A handy tool for fishing from the shore and in the water. Saves time for the angler, as this tool can be placed close by at all times and the baits will always be at hand.
Holder for BC1000 and BC1000PI jars.

Dimensions - 17x20cm

Matrix Keepnet Arm Short MK2 - Improved and reinforced compact design with quick-release handwheel and easy-grip arm wheel. Fits 25mm, 30mm and 36mm round platform leg.

Dimensions - 40x10x10cm

Corner holder for threaded fishing net. Conveniently attaches to the chair and threads the net comfortably into the thread to keep it close at hand. Suitable for 25 to 36 feet.

Adapter for F5R chair - the adapter is used as a 25mm tube on which you can attach various fishing accessories such as a feeder arm, a table, a rod holder and others.

Made of sturdy material, adjustable in different directions with fasteners. It is conveniently mounted on your chair or fishing platform and thanks to special adjusters it is fixed in the right position. The container is spacious and allows you to fill it with a sufficient amount of bait or other ingredients. The Carp Zoom Bowl with Arm is always close at hand, which is very convenient and saves time when periodically baiting the fishing area.

Side table for chair or platform. Attaches at one point to the leg, has a telescopic support leg with a standard thread at the top for attaching accessories. Suitable for all chairs and platforms with 36,30 and 25 mm legs. It has a retractable canopy to protect against wind, rain or sun. The table itself does not weigh a lot as it is made of lightweight materials.

Dimensions - 65x45cm

Matrix Multi Rest Ripple Eva is a new, modern design rod holder for attaching to the feeder arm, covered with EVA material (soft). The holders are rough and can be fitted with additional side holders to prevent the rod from being pulled into the water.

Available in different lengths.

Video review ...

Matrix Flexi Rod Rest is a modern design, soft rubber rod holder that can be threaded onto various rod holders. With angle adjustment function. Comfortable and sturdy rod holder. Sold 1 piece.

Dimensions: length - 10cm
Width between bumps - 4cm

Matrix 3D-R Feeder Arm - A feeder arm, stable and robust. Adjustable lift angle and length. Includes a quick connector for screwing on the arm bracket. Suitable for 25mm, 30mm and 36mm platform legs.

Lengths from 83 to 130cm

Matrix 3D-R Eva 6 Kit Roost Bar is a soft, EVA rod holder for 6 rods. Fits on 25, 30 and 36mm legs. Integrated 3D-R quick connect system.

Length - 36cm
Video review -

Matrix 3D-R Double Protector Bar Short - double rod holder. Suitable for use on chairs or platforms. Made of soft EVA material, with quick release and two threaded attachment points. Suitable for 25, 30 and 36mm round legs.

Length - 28cm